Setup A Network With 100 Computers Along With Router?
Oct 29, 2011i want to enquire how we can setup a network with 100 computer along with router, firewall, print server, file server. diagram of network to understand the things.
View 1 Replies
ADVERTISEMENT
Home Network :: Setup A Local Network Between The 3 Computers But Separated?
Jun 28, 2012i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies View RelatedSetup A Hard Wired Network For 30 Computers?
Jan 28, 2013I want to setup a hard wired network for 30 computers
View 1 Replies View RelatedBusiness Network Setup -restrict Access To Some Of The Computers?
Jun 26, 2012I have a client who has asked me to "optimize" their network.They currently have a few shared folders that everyone can see, but what they want is to restrict access to some of the computers on the network.More specific,they don't want the receptionist and the backroom workers to have access to those shared folders while the rest of the employees (the bosses) do have access to those folders.They have 2 computers with Windows 7, 2 computers with Windows XP, and a mac.
View 4 Replies View RelatedSetup A Wired Network Between Computers But Leave The Wifi On Them?
May 5, 2011I'm sort of new to networks so I'm not sure if this is even possible but what I'm trying to do is set up a wired network between computers but leave the wifi on the computer as how it connects to the internet. I'm using two computers connected through a lynksys router(not connected to the internet) and ethernet cable, and one of the computers has a wireless card that connects to another router that is connected to the internet. i can set up a network between the two computers but then the one can't connect to the internet(even though it says it is connected the network with internet),
View 2 Replies View RelatedHome Network :: Setup A Remote Desktop Connection For 3 Computers?
Apr 28, 2011i want to setup a remote desktop connection for 3 computers on the same network to connect to remotely. Originally i was going to port forward the original windows RDP port and run the windows rdp service but learnt that XP Home Edition doesn't support this feature. I want to be able to log onto these computers at any time remotely with the need of accessing the computer before i connect.
View 2 Replies View RelatedWireless Router To Multiple LAN Computers Setup?
May 9, 2012I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.
View 1 Replies View RelatedThree Computers - Internet Modem And Router Setup
Jul 14, 2011We have three laptops in our house. We are set up with internet that gives me a direct connect and up to eight wireless devices. My son and daughter-in-law use the wireless and I use the direct connect. M son added a router (which I have no idea what that does) and set up networking on his computer (which I also have no idea what that does). When I am the only one on the computer, it flys. When either of them get on thiers too, it slowes a little. When both of them get on, I might as well get off because it can take up to three and a half minutes to load a page.
View 3 Replies View RelatedSetup 2 Computers To Communicate With Each Other?
Sep 30, 2011How do I set up to computers to contaminate with each other in the same room
View 1 Replies View RelatedDLink Router - How To Network More Than 10 Computers
Jul 12, 2012I would like to have the best networking on my cyber with a D-Link router, IDU and a D-Link switch so as to connect more than 10 Computers, and send me a mapping of the computers and Manual.
View 2 Replies View RelatedHome Network :: Two Computers Can't Be On Router At Same Time
Aug 13, 2011I'm using Comcast cable. I have a motorola cable modem. I run that into a Netgear 8-channel router with wireless (that's 8 physical network sockets).I have had these devices hard-connected to the router up until today and everything has been running fine:
* My Desktop (desktop running Windows 7 with Gigabyte motherboard and built-in Realtek NIC)
* T-Mobile VoIP device
* My Laptop (old Alienware running XP with generic NIC)
Today I took my old desktop motherboard from a year ago (Gigabyte motherboard, but not the same as My Desktop, built-in Realtek NIC), gutted it out, replaced the hard drive, got it running Windows 7 and set it up for my kids. Got it connected to the Internet early this morning when my machine was off and it ran fine.While it was updating, I fired up My Desktop and the router stopped working, all machines lost Internet, and I was at a loss.After some troubleshooting, it turns out that if I have My Desktop and the Kids Machine connected to the router and running at the same time, all devices on the router lose connection. I can have the Kids Machine on with the T-Mobile device and My Laptop and they all work. I can have My Desktop on with the T-Mobile device and My Laptop and they all work. But as soon as My Desktop and the Kids Machine come on together, everything gets hosed.The router is set to reserve different IP addresses by Mac Address for every machine. And I've verified that My Desktop gets its IP address correctly, and so does the Kids Machine. They are different IPs.I (usually) know just enough about networking to get a home network set up.
How To Network 2 Computers On The Same Wireless / Modem Router
Jan 18, 2011I have 2 laptop connect to 1 wireless/modem router. Laptop A using Windows XP SP2 Laptop B using Windows XP SP3
How can i link both laptop to shared folder with one another ?
Advanced Security Options For Wireless Setup (45 Computers)
Jul 25, 2011Our company is moving to a new location temporarily and we will be looking to do wireless for our network instead of wired. We have a dell power edge 2900 server running windows SBS 2008 and a switch with more than enough ports for what we need.What i need to know is how exactly to do the wireless and what hardware would work best for us. We plan to have approximately 45 computers hooked into the server and have some wired but for the most part wireless. Also we would want to look into advanced security options for our wireless set up as we will be in the same building as a few other companies.
View 5 Replies View RelatedTwo Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)
Aug 9, 2012I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54GL - Possible To Add Computers On One Network
Nov 7, 2012I have two WRT54GL wireless routers. I have a computer and printer in my office connected to one of them. I'd like to add a computer and printer back in the shop to my network without using a wired connection. Can I use the 2nd wirelss router so that all computers and printers are on one network?
View 6 Replies View RelatedCan't Access Other Computers On Windows 7 Network With Vonage And D-Link Router
Feb 25, 2011I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies View RelatedLinksys Wireless Router :: E2500 Can't See Other Computers On Local Network
May 1, 2012I have a E2500 connected to a cable modem as the base of my home network. Hard wire connected to the E2500 is an linksys 8 port hub and a couple of computers. The 8 port hub is connected to a couple of computers and a xbox. I have the hub as a distro point to cut down on wiring. Wirelessly connected to the E2500 are a variety of laptops, netbooks, ipods, an ipad, a playbook, an iphone, a android phone, a wireless printer and a Ps3. Most of the devices are just using the wifi for internet access. Most devices have been setup with their own ip addresses to avoid ip conflicts. The computers and laptops/netbooks are running either Windows XP, Windows 7 or Mepis Linux. Up until now everything was going as good as can be expected, all the computers could see each other and most could transfer files between each other except when Windows gets picky.In the last few days no computers can see each other. Windows or Linux.Everything can accsess the internet and wirelessly print still just can't see each other. I reset the E2500. I updated the firmware on the E2500. I installed the Cisco Connect software (just in case I was too stupid too setup a router). Still nothing. I can ping other machines from a command prompt in windows or a terminal in Linux and get a good ping back. In the router setup via a browser I can go to the status page and see other devices on the local network but most are just ipods, ipad, playbook and the wireless printer, If I go to the administration page / diagnostics I can ping other computers and get a good answer. I just can see them from each other. I think I've rebooted every thing at least once. Yes the workgroup names are all the same (workgroup) and yes file sharing is turned on on all computers.
View 3 Replies View RelatedLinksys Wireless Router :: Cannot Find Network Computers E3000
Jun 2, 2010I purchased a E3000 Router to replace a dead Dlink about a week ago..I have 4 wired computers on my network. All in the same workgroup. I have 2 computers connected directly to the E3000, and 2 computers connected to a ProCurve managed switch on the other side of the house. I can ping the computers on the switch side of the network but i cannot see those computers in the network section of windows 7. I can also navigate to them via \ computername.
View 7 Replies View RelatedLinksys Wireless Router :: WRT54GL - Network Rate Of Other Computers
Nov 4, 2011How can I see network rate of other computers connected to my WRT54GL wireless router?I have admin password and I want to see how much bytes/sec received and sent from all the computers connected to the router.
View 2 Replies View RelatedD-Link DIR 600 Wireless Router Unable To Network Computers But Can Share Internet?
Sep 4, 2011I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies View RelatedHome Network :: Getting Router B (DD-WRT) See Computers On Router A?
Dec 8, 2011I have a somewhat unique setup with my 2 routers. Below is a layout of how it's setup, and I basically want computers and printers to see each other on the 2 different routers. The reason for the 2nd router is so I can have certain devices connecting to a US VPN Service for my Apple TV, and XBOX in order to watch Netflix and Hulu, since I'm stationed in the UK for the DoD.
Router A = Main router with VDSL connection (BT Home HUB 3.0)
Router B = WAN: PPTP router for VPN Service flashed with DD-WRT (WRT160N)
Router A connects to Router B by a CAT 5 from Router A LAN port to Router B WAN/Internet port (This is the only wired connection)
Router A = 192.168.1.249
Router B = 192.168.2.1
Router A has most of my desktops/media server/printer running on it wirelessly, and router B has my Apple TV, XBOX, and Desktop.
Since I have movies and music on my Desktop on Router A, I would like that data shared to my Apple TV on Router B. The only way I can get this to work right now is by constantly switching networks.Same goes with printing. Printer is connected wirelessly to Router A, and if I want to print with my laptop connected to Router B, it won't.
So is there a way I can make my Router B (DD-WRT) see computers on Router A? Router B has to have a PPTP WAN connection. Is this as simple as connecting another CAT 5 between the LAN ports of each router or is there some advanced routing I can do somewhere?
Linksys Wireless Router :: E1200 DHCP Systems Loose Ability To See Other Network Computers
Nov 22, 2012Have Win7 and XP systems in my network wire connected to the router. When IP of both systems are not reserved, each computer can see other network computers and devices, five in total.A good thing that both systems get each time same IPs which even got not changed since I upgraded from E1200.When I reserve an IP for each system exactly that they currently have, both systems loose ability to see other network computers. Network shares not affected, I still can remotely access my XP box remotely from my 7 via RDP by computer name. WDTV Live wirelessly connected to the router can get/update its IP address (no connection issues) but same as others cannot see network resources.
Tried different ways, rebooted, finally ended up with device reset pushing the button.The next day I managed to reproduce the issue, but was able to revert by disabling/enabling of DHCP server.Another issue I got with an external HD connected to the router when some files got converted to folders by uTorrent started from that drive.I had to use Unlocker application to be able to delete folders converted. I can just assume that issue because of anonymous access was enabled to the external disk. No problems when same HD connected to PC USB.
How To Tell If Network Priority Is Setup On Router
Oct 17, 2012Is there any way I can tell if an network priority is setup on the router? The last week or so the internet has been unusually slow sometimes, and not slow at all other. I don't have a good relationship with my roommate (network administrator) and I feel she may have put a network priority on the router for her and or her boyfriends computer/s. Is there any way to tell? Is there a particular way in which the internet behaves when a priority is set? I just don't want to pay for the internet if it is not going to work most of the time.
View 6 Replies View RelatedSetup A LAN Network Using Wireless Router?
Dec 26, 2011I am trying to setup a LAN network using wireless router. I hv two network cards. One is connected to internet through ADSL modem. Internet is working fine.The other network card is connected to wireless router.I am trying to setup hotspot at for learning purpose.
View 1 Replies View RelatedSetup A Private Network On A Second Router?
Dec 20, 2012I get an Ethernet cable from his router in my unit. I also have my own router. I was wondering if there is a way for me to create a private network for myself using my router and still have access to internet?
View 1 Replies View RelatedSetup A Wireless Network Using Laptop As A Router?
Jan 9, 2012Can my Laptop be used to setup a WLAN for gaming?
View 2 Replies View RelatedHome Network :: Cannot Setup NAT On Edimax Router
Aug 10, 2012Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?
View 1 Replies View RelatedFind Network Security Key After Router Already Setup?
Aug 28, 2011How do I Find network security key after router already set up
View 1 Replies View RelatedFind Network Security Key After Router Already Setup
Dec 22, 2012Find network security key after router already setup
View 2 Replies View RelatedXp Cannot See Other Computers On Network?
Jun 11, 2011I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
Can't See Other Computers On The Same Network
Oct 7, 2011I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies View RelatedCan't See 2 Computers On The Same Network
Aug 8, 2011I have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies View RelatedDir-615 Dlink Router - How To Setup Wifi Home Network
Oct 13, 2011I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies View Related