Setup A Private Network On A Second Router?

Dec 20, 2012

I get an Ethernet cable from his router in my unit. I also have my own router. I was wondering if there is a way for me to create a private network for myself using my router and still have access to internet?

View 1 Replies


ADVERTISEMENT

Belkin Routers :: Can N150 Setup To Just Run Private Network / Not Connect To Internet

Nov 5, 2012

Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.

View 1 Replies View Related

Setting Up DMZ On Master Router For Private Network?

May 22, 2012

I was looking to setup a y configuration of routers with a modem going to master router, then from the mater router LAN ports to two other routers wan ports to give a guest and private network. I understand that this will all work fine for normal web surfing but can be very long winded when setting up port forwarding which i would need on the private network so I was wondering if I could get around this by setting up a DMZ on the master router for the private network router allowing all the port forwarding to be taken care of by just the one router. Would this work and would the two networks still be secure from one another.

View 8 Replies View Related

Cisco Routers :: RV110w - To Setup Two Vlans On Private IP

Jun 2, 2013

I'm looking to update our office network and replace our old wireless box.I've been looking at the RV110w after a google search and need to find out some things before suggesting anything.
 
Currently our network is running a public IP address for each piece of equipment which we'd like to keep, mainly for ease.  We have a wireless access point running in invisible mode for wireless client access to the entire network, and also a Netscreen firewall.
 
What I'd like to do is the following:
 1.  Keep public ip addresses for wired clients, complete with existing network/local server access/RDP.
2.  Set up two VLans on private ip addresses - one to have full access as per the wired clients and the other only for guest Internet access.
 
Is this something the RV110w is able to do?  If so how would I go about setting it up?

View 3 Replies View Related

Setting Up Second Router For Private Local Network With Internet Access?

Mar 13, 2011

What I'm trying to do is create a private network for local file sharing but also have internet access. There is a WRT54G router connected to a satellite modem in a separate building, just barely close enough to connect from my laptop, which is what sparked my original idea to use my WRT54GL as an access point.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Want To Hide Name Of The Primary / Private Network

Mar 6, 2011

I named my network "abc," and the system appends "-guest" to it, i.e.., "ABC-guest", to use as the guest network name. I want to hide the name of the primary/private network completely. Why can't I do that? I know I can use a different password. 

View 7 Replies View Related

Linksys Wireless Router :: E2500 - Change Private Network Name As Well As SSID?

May 26, 2012

Is it possible to change one's private network name as well as SSID?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Doesn't Have Internet Access On Private Network

Jul 17, 2011

Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.

By the way, I'm using E-1000 v2.1.02

View 1 Replies View Related

Linksys Wireless Router :: Port Forwarding In A Routed Private Network With E2500?

Jan 7, 2012

I would replace an old Levelone Router with a Linksys E2500.I have 3 different routed private networks (e.g. 192.168.1.0/24 , 192.168.101.0/24 and 10.0.0.0/24) How can I forward different ports to this 3 different private networks with an E2500.Under "Games&Applications" in the" Portforwarding" menu the first 3 octets of the "to IP-address" are fix and corresponds ever with the LAN ip address of th E2500.

View 4 Replies View Related

Home Network :: Private Network Within A Larger Network?

Nov 14, 2011

I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.

Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.

View 1 Replies View Related

Home Network :: Possible To Assign A Name To Private Network?

Apr 10, 2013

Is it possible to assign a name to your private network so I dont have to type the ip address and port # each time?

View 5 Replies View Related

Make A Private Network?

May 16, 2011

I have a router, networking 2 computers. One of them I wish to set to "ad-hoc" I do not want it accessing the internet.

So, a "wired ad-hoc".

The best discriptsion I have is on a Vista or 7 machine you have the Network map I want to disconect the computer from the internet, and leave it connected to the network.

View 1 Replies View Related

How To See Files On A Private Network

Oct 11, 2011

I have two Win XP machines. One is connected to the LAN and the other is a standalone. I have installed an additional network card on the machine connected to the LAN. That machine is linked to the standalone through a switch using the 162.198.1.xxx sequence of IPs, with 255.255.255.0 as the subnet mask and no DNSWINS, or anything else. I can ping either machine from the other through the private network, but cannot see the files. I need to pull certain files from the standalone, but have not been able to even see them.

View 4 Replies View Related

Server For Private Network?

Sep 22, 2011

I want to add server(Intel PC with 2.8 P4 processor, 1GB RAM and 80GB harddisk) to my private network (not accessible from outside).I have 50 users in my network ( approximately 30 users login at same time)what simple good things that I could have on the server( website, forum,...) and what OS should I install on it?

View 5 Replies View Related

Creating A Private Network Within A Larger LAN

Mar 16, 2013

I'm starting college in the fall and will be living in the dorms on campus. I want to have a "private network" setup within the university's network in my dorm room so my and my roommate's phones and iPads can still find my Apple TV, file sharing and network drives are still possible, and I can easily set up my network printer. Obviously, I don't want to lose Internet connectivity. Can I use NAT to accomplish this without losing Internet connection through the university?

how the sysops will hate me if they find me, I know this. It's not for malicious use, only for ease of use of my devices.

This may be totally off base, that's why I'm asking if this will work before I try it. I have an old WRT54G I would like to use if its capable, if not I'll buy a new one but I'm trying to avoid that. Here's what I'm thinking:

My router plugged into the University's Ethernet port in my room (for this setup do I use a LAN port or the WAN port on the router?) DHCP disabled, all devices static IP On the "Advanced Routing" tab: "Router" mode, not "gateway" mode What should my destination LAN ip be? Gateway? LAN & Wireless or WAN?

Switch connected to the router

Devices connected to the switch or connected wirelessly Should my gateway and DNS on each device be the host address assigned to my router?

View 5 Replies View Related

Share Two Webcams On Private Network?

Feb 11, 2013

I want to share my two webcams on my private network.

View 1 Replies View Related

Servers :: Access Web Server On Private Network

Jun 14, 2012

I have a VPN with a number of servers where we are doing some software development. We have a TFS, Web, App and SQL Server etc.. inside a private LAN which is accessible via VPN. Nothing inside the private network can access outbound. However, I would like to open the Web Server on the private LAN to be able to be accessed via http(s).As we develop the software I want to access the site from the internet.It's a fairly simple setup.DSL > Modem > Home Lan. On the Home Lan I have a Server (2 ethernets) connected to the modem router and the other card to a hub. This server acts as the VPN server, DHCP etc.. for the Private LAN.The web server I want to be able to access from outside is the one inside the private network. Any recommendations?fyi, I'm not a networking guy, I hacked my way through setting up the private network through a number of great YouTube videos, that saved me a lot of time.

View 2 Replies View Related

Dell Inspiron 530 / Cannot Switch To Private Network

Oct 3, 2011

Machine is Dell Inspiron 530 windows vista. i cannot get on any network. command prompt just tells me a bogus ip 169.xxx.x.x when i go to the network setting it just keeps saying "identifying" can see anything on the net work. cant ping anything and when ever i try to enable network discovery and switch to private network just give me an error message saying "request is not supported".the machine was infected with "open could security" fake anti spyware program and was removed. used MW bytes and Super Anti. didn't find anything, also used HJT to make sure no process' were running that shouldn't be. made sure the services that were suppose to be running. only one particular one would not start it was called "server" just kept saying it was stopped because it was not being used?

View 8 Replies View Related

Linksys - Create Private And Guest Network?

Jan 6, 2013

I wish to establish a private and guest network for a local business. They have Verizon service with its wireless router plus their own personal wireless router.The Actiontec mi424wr (rev i) wireless router is connected via Coax and will remain the first in line so as not to disrupt the set top boxes (STB) channel guide and other features managed by the Actiontec. The radio is active with an SSID of "ABC-Private" and its network is 192.168.1.xx. The thought is that only business personnel will connect to this router for internet.I have connected their Linksys WRT54GS to the LAN port of the Actiontec, using a static IP which I have allocated in the Actiontec's DHCP pool for this purpose. This radio is active with an SSID of "ABC-Guests" and its network is 192.168.2.xx. The thought is that only patrons will connect to this router for internet.

My overall goal is that business personnel will have unrestricted access to the internet AND to each other while patrons will only have HTTP and HTTPS access to the internet and no communications will be permitted between the two network subnets. I realize there are hardware firewalls designed for accomplishing such a goal, but the business hopes to avoid the additional expense, if the aforementioned model can provide this capability.In order to accomplish this goal, my remaining tasks as are follows:

1. On the Linksys, permit only http and https traffic (and whatever else the patrons would need/want).

2. On the Actiontec, deny Linksys IP address access to everything except for the Actiontec gateway.

View 1 Replies View Related

Login Into The Private Network From Remotely In Switches?

Mar 21, 2011

how can we login into the private network from Remotely in Switches and firewall or Routers,

View 5 Replies View Related

How To Change Windows 7 From Private To Public Network

Jul 25, 2011

I have an existing network with several computers running Vista and XP. My new computer has Windows7. The WIN 7 computer can access the router and the internet. But it is invisible to the rest of the network. It is currently set up as "private network". I think it should be "public network". How / where can I change it ?

View 1 Replies View Related

Remotely Access Server That Is On A Private Network?

Jan 15, 2013

I am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.

View 1 Replies View Related

Creating Private Routed Network Design

Jan 17, 2013

1.create a drawing showing a private routed network.

2. On this drawing you will show your placement of the following,why they were placed there (you can use one or more of the servers/router listed in your drawing):

View 1 Replies View Related

Cisco VPN :: ASA5505 VPN Private Network With IP Public

May 19, 2011

My partner imposes that i create a VPN connexion with CISCO ASA5505 and send requests by public IP  on my private network.Is it possible to create NAT rules with this possibility?

View 2 Replies View Related

Home Network :: Private LAN And Public Internet Connectivity?

Oct 5, 2012

In my office we have a private LAN of 10.0.0.0 having no access to internet/broadband. To connect to internet, we do it by using broadbandconnection/Modem from MTNL. Both things require a separate NIC card. My query is "Can I use my BroadBand Modem to connect to internal LAN". I have heard this is possible by some suitable changes in Current Control Set in Windows

View 3 Replies View Related

Netgear FVS318G - Creating Private Network In Larger One?

Nov 14, 2011

I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.

Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options. I'm hoping to use this since it's low profile. Many to one NAT should accomplish this, correct? The larger network should only be able to see the one device and not the clients behind it on the private network?

View 2 Replies View Related

2 Routers Connected To One Modem For Public / Private Network

Jan 27, 2012

I'm planning to set up a network with two routers and one cable connection. One router will be for public wifi at my business and the other will be for my Point of sale system and private use. I think I have it figured out but want to double check the set up. Someone tell me if this isn't correct or if there's a better way of doing it.Cable modem --> connect via ethernet to Router #1 WAN port. Router #1 Lan port 1: connect via ethernet to router #2 WAN. Now, router 1 and 2 will have two different subnets; 192.168.1.x and 192.168.2.x respectively. Router #2 is the one that I should use for my private network and for the POS system since it can't be accessed by users from router #1 correct? I have DD-WRT installed on both routers but I plan on putting Tomato firmware for router #1 to limit bandwidth for public wifi and keep DD-WRT installed for router #2.

View 1 Replies View Related

Cisco WAN :: ASA 5510 / Cannot Access Internet From Private Network?

May 1, 2013

I'm setting up a Cisco ASA 5510.I did the setup for my public and private interface.From the management software I can ping any outside domain using my public interface, but when I try to do that from my private interface I cannot.Also for some reason my ip phone connected to the private interface work (I'm able to make and receive call), but any computer that I connect to the private interface I cannot access the internet.

View 1 Replies View Related

Cisco Wireless :: Private Network Disappeared On 1130AG

Oct 1, 2012

I'm trying to set up this 1130AG with a private wireless network and a guest wireless network. Initially it had just one wireless (private) and it worked fine, but then when I created the two VLANs for each SSID and then the guest SSID and now the guest SSID is visible/broadcasting, but the private SSID has disappeared or is off.

P.S. - It's a Cisco Aironet 1130AG (AIR-AP1131AG-A-K9) running 12.3(8)JEA system software and I'm using the web GUI (I'm not familar with the command line for Cisco products yet).

View 4 Replies View Related

Firewall Is Deep Inside Private Network PIX515

Jan 7, 2011

I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere.

Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. [code]

View 2 Replies View Related

Networking :: WNDR3700 To Add Public IP Addresses To Private Network

May 26, 2011

I have set up a private domain network at home. I have a domain controller, a DNS server, and a DHCP server all running on one Windows 2003 Server machine. I have about 10 other machines around the house, getting their IP addresses from this DHCP server.

I have a Netgear WNDR3700 router.

I am about to get 5 public IP addresses from my ISP, and I would like to make some of these machines publicly accessible (while still accessible from the other machines in the network).

I found this link that says on my web server (one of the public machines), that I should use a second NIC and set that up to connect to my router (and get a private IP address from my DHCP server).

View 1 Replies View Related

Internet Access Using Multiple Computers On Private Wireless Network

Apr 2, 2012

the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.

View 1 Replies View Related

Cisco Firewall :: ASA 5520 - IPSec Tunnel Without Private Network

Apr 11, 2013

I'm trying to achieve a site-to-site ipsec tunnel to a Cisco ASA 5520.  Most examples feature the ASA with a public interface that terminates the tuennel and a private network on another interface that the tunnel interacts with.  Where my scenario differs is that the interface that accepts the tunnel is part of a public /29 network where I want the remaining hosts on that subnet to be able to route thrugh to the other end of the tunnel.  My tunnel gets established, but any attempts to route via the IP assigned to that one interface result in the ASA rejecting traffic. If so, what configuration options should I consider?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved