Cisco WAN :: ASA 5510 / Cannot Access Internet From Private Network?
May 1, 2013
I'm setting up a Cisco ASA 5510.I did the setup for my public and private interface.From the management software I can ping any outside domain using my public interface, but when I try to do that from my private interface I cannot.Also for some reason my ip phone connected to the private interface work (I'm able to make and receive call), but any computer that I connect to the private interface I cannot access the internet.
View 1 Replies
ADVERTISEMENT
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Mar 13, 2011
What I'm trying to do is create a private network for local file sharing but also have internet access. There is a WRT54G router connected to a satellite modem in a separate building, just barely close enough to connect from my laptop, which is what sparked my original idea to use my WRT54GL as an access point.
View 1 Replies
View Related
Jul 17, 2011
Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02
View 1 Replies
View Related
Jun 14, 2012
I have a VPN with a number of servers where we are doing some software development. We have a TFS, Web, App and SQL Server etc.. inside a private LAN which is accessible via VPN. Nothing inside the private network can access outbound. However, I would like to open the Web Server on the private LAN to be able to be accessed via http(s).As we develop the software I want to access the site from the internet.It's a fairly simple setup.DSL > Modem > Home Lan. On the Home Lan I have a Server (2 ethernets) connected to the modem router and the other card to a hub. This server acts as the VPN server, DHCP etc.. for the Private LAN.The web server I want to be able to access from outside is the one inside the private network. Any recommendations?fyi, I'm not a networking guy, I hacked my way through setting up the private network through a number of great YouTube videos, that saved me a lot of time.
View 2 Replies
View Related
Jan 15, 2013
I am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
View 1 Replies
View Related
Mar 14, 2013
I have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
View 1 Replies
View Related
Jun 10, 2011
I configure for our office site to site VPN project. Now I configured already Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
Branch LAN 10.2.1.0/24 >>> ASA 5510>>>>> 1841 >>> INTERNET <<<<<< 1841 <<<<<< 10.30.3.0/24 ^^^^ Call Manager 2851
Now can access from Branch LAN to HQ LAN each other. I face the problems that are
1) In branch LAN , they can access HQ LAN & resource , but cannot access internet. I didn't configure NAT on PH Router
2) Can I access internet from BRANCH LAN through HQ LAN to INTERNET. Or Can I access Internet from Branch LAN from PH Router directly while access to VPN to HQ LAN ?
3) In Branch Site , hard phone cannot work but soft phone on PC can call to HQ. Hard phone IP are same in Remote Network (172.16.1.0/24 ) . Is it problem ? how can I configure separately ?
View 2 Replies
View Related
Jun 11, 2012
We have configured a Cisco ASA 5505 with AnyConnect access. This works great. However, these users cannot seem to ping devices on the private network. We have configured all devices on the network with a 10.10.10.0/24 address space. The inside interface of the ASA i 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.They users can utilize SSH and Oracle or MySQL calls but cannot seem to ping. Obviously, I am over looking something.
View 2 Replies
View Related
Oct 2, 2012
I am trying to provide internet access to public and private SSID's on Cisco AP541n using VLAN's connected directly to ASA5505. VLAN1 is inside interface (private) and VLAN12 is wlan interface (public SSID). The AP541n is plugged into switch port 0/7 on an ASA 5505.Port 0/7 is configured as trunk mode. I have internet access when connected to private SSID but no internet access when connected to public SSID. why I can't access internet on public SSID?
logging class ip history emergencies
mtu inside 1500
mtu outside 1500
[Code].....
View 5 Replies
View Related
Oct 5, 2012
In my office we have a private LAN of 10.0.0.0 having no access to internet/broadband. To connect to internet, we do it by using broadbandconnection/Modem from MTNL. Both things require a separate NIC card. My query is "Can I use my BroadBand Modem to connect to internal LAN". I have heard this is possible by some suitable changes in Current Control Set in Windows
View 3 Replies
View Related
Aug 11, 2011
I have a WRVS4400N that brocasts two different SSIDs. One is a public network and the second is a private network. Right now, both SSIDs are pulling from the same DHCP server, but I would like to seperate the public from the private. How can I seperate these SSIDs by vlans? I can't seem to get the vlans to route to sperate ports.
This is my vlan settings. I have two DHCP servers right now. One is in an isolated network plugged into Port 3 of the WRVS4400N. The other is on the production network, plugged into port 1 of the WRVS4400N. For some reason, whenever I connect to SSID Public, it won't pull an IP from the DHCP on port 1, it only pulls it from the one on port 2.I know there is three SSIDs here, the Static one is going to be the same network as the EMS one.
View 1 Replies
View Related
Nov 5, 2012
Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies
View Related
Feb 8, 2012
i recently get high speed link for my compagny to replace the old frame realy.the internet service provider gave me a non routable range to set on my asa like this : [code]then the ISP tell my public ip wan range was x4.23.209.166/29.i made this kind of configuration works when i put a cisco routeur in befor the cisco asa like this: [code] it is possible to make this works on cisco asa 5510 without putting a router in front ?if it works problem can happen to establishing vpn from the outside interface having a private ip ?
View 6 Replies
View Related
Jul 22, 2012
I am now using ASA 5510 as a firewall device.I have configured 3 interfaces ethernet 0/0,ethernet 0/1,ethernet 0/2 as Wan interface, DMZ interface and Internal Lan interface. Internet is working fine from LAN as well as DMZ.The WAN interface use the Public Point 2 point IP(/30) Provided by the ISP and another pool of Public Ip is also provided by the ISP (/28). Now I want to Map the /28 IP to some servers in DMZ . DMZ servers currently have 192.168.101.0/27 private IP . Now the problem is how to Map the Public IP to those Private IP in DMZ servers.
View 9 Replies
View Related
Sep 5, 2012
We have the setup as shown above, our requirement is to access mail server via ports smtp and pop3.But as the mailserver is hosted at internet users at site were not able to aceess. we need to nat a intranet ip with mail server ip and mail server ip back to intranet ip and provide the access.We use ASA 5510 firewall.
View 7 Replies
View Related
Jun 25, 2012
We have had a successful site to site vpn working for several months now. It is an ASA 5510 at HQ to a ASA 5505 at a branch office in another state. We just added a second site to site vpn in another state this time from HQ to a Sonicwall TZ100. After plugging in the Sonicwall to the Qwest modem in bridge mode the tunnel came right up. I was unable to to ping any off the private IPs at HQ from the new branch, but was able to use remote desktop into the servers and workstations at HQ. Also all the computers show up when browsing the network from the new branch.
At the first branch we are able to ping both ways and use remote desktop both ways.When using packet tracer in ASDM on the HQ ASA and pinging from one of the IPs in the HQ protected network to an IP in the new branch network NAT-EXEMPT looks good, but when it hits the first NAT it matches on the "dynamic translation to pool 10 (10.1.255.254) [Interface PAT]" (which is the default route for all the vlans to get to the Internet.)The next NAT (subtype - host-limits) looks better and this one going to the IP address of the outside interface of the HQ ASA 5510, but then the third NAT (Subtype - rpf-check) reverts back to the "10 (10.1.255.254) Interface PAT]" and the packet is DROPPED. Also there is no VPN step in Packet Tracer after NAT.[code]
Is the problem possibly due to the fact that my 2 new ACLs for "encrypt_acl-30" fall after "access-list global_mpc extended permit tcp any any" in the config and it is running into the implicit deny all?
View 8 Replies
View Related
Jun 6, 2012
I have a new customer that needs to send data to us occasionally, we normally install the Cisco VPN Client on their PC, but this customer has the same private network we do.
I know this could be done with NAT Policy on my ASA 5510 with a site-to-site VPN, but the customer does not want to change the network hardware or addressing. They have cable router with no VPN capability, and they don't want to spend any more money on this project.
Can this work if their are no duplication of IP addresses?
View 25 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
Mar 22, 2012
The title says VPN clients cannot access DMZ network, but that is not exactly the problem, the situation is this, a group of users are using an actual 10.x network where they have their servers and pretty much everything. The users must be relocated into a new network, the 172.16.x. In a point in time they will not have to use 10.x anymore, but meanwhile, they need access to that network.
I have an ASA 5510 as default gateway for the new network (172.16.x.x), one interface e0/0 connected to the outside (internet), interface e0/1 to the inside and other interface connected to the actual 10.x (which I call DMZ), so basically I am using the ASA as a bridge using NAT to grant access to the users in the network 172.16.x to the resources in the 10.x network while the migration is completed.
All the users must use the path to the internet thru the ASA using the NAT overload to the outside interface and I put in place a NAT policy to 10.x to allow access to the 10.x network only when the internal users 172.16.x try to reach that path and so far, everything is working just fine for the internal users.Now for some reason, when I do VPN, the VPN clients cannot reach the 10.x network, even when they are supposed to be in the internal network (because they are doing VPN right?) .
I have enabled split tunneling with NAT exempt the 172.16 network and I am not sure if that is causing the problem, because when I trace from my PC the 172.16.16.1 address using the VPN I get the proper route path, but when I try to reach 10.x, my PC is using its default gateway and not the VPN gateway which has a route to 10.x.
I’m not even sure if what I am trying to do is possible, I want VPN users to be able to access a 10.x network using NAT overload with the Interface of the ASA plugged to the 10.x network, just like the internal users are doing right now.
View 1 Replies
View Related
Apr 16, 2012
I have an ASA 5510 which works great except I'm unable to connect to the remote access VPN from inside the network (behind the ASA). Is there a special NAT exemption required? [code]
View 6 Replies
View Related
Jan 28, 2012
My network includes *8 port unmanageble switch and a ASA 5510 firewall. There are two internet lease line from two different ISP which are end on switch. Through switch it goes to firewall. This network was working fine. Now we hired a new Internet connection from another ISP. When i tried to connect this 3rd line to my switch , all network goes down.
View 1 Replies
View Related
Nov 14, 2011
I can't seem to get internet access working from the DMZ network through our ASA 5510. PCs on the DMZ can ping the ASA but can't get out to the internet.I will attach a (cleaned) configure.
View 3 Replies
View Related
Oct 29, 2012
I can get access to the internet from the ASA 5510 itself and that is confirmed via pings. However, anything behind the ASA does not have internet access, on any VLAN/sub-interface. I've attached my running-config.
View 2 Replies
View Related
Feb 27, 2012
the set-up is: a DSL modem in half bridge (it does all the PPPoE connection) passes our static IP (55.167.x.x) to the ASA's outside interface ... (the modem has an IP of 192.168.1.1, but not sure this matters)
then I have one inside interface on 192.168.43.1, which connects to a server and we have a working site-to-site VPN between this server and a client.. so I know most of it's set up right ... nothing else is on the 192.168.43.0/24 network.
the management interface is on 200.200.1.0/24 so it's out of the way and incidentally connected to a dedicated PC, which also has console access via the blue serial cable.
the last interface Main_Network is on the 192.168.0.0/24 network and it's this that I'm trying to get to work... at the moment I just have one Windows PC connected directly (does it need to go through a switch?) into the ASA for testing with a static IP (192.168.0.72), but I can't ping anything outside from the PC... only the ASA's interface (at 192.168.0.30).. I have the gateway on the PC set as 192.168.0.30 by the way.
The ASA can ping all the inside machines and anything I like outside.
Here's my config ... the static routes are there for when this replaces the current modem/router and the whole network plugs into the ASA.
ciscoasa(config)# show running-config
: Saved
:
ASA Version 8.2(5)
!
hostname ciscoasa
[Code]......
View 4 Replies
View Related
Dec 1, 2011
I lost the ability for my Web server (or any servers in the DMZ) to access the Internet. However, the Web server is still being used fine from the Internet. Here is my config
ASA Version 8.4(2)
!
hostname xxxx
domain-name xxxxx
enable password xxxx encrypted
passwd xxxx encrypted
names
[code].....
View 3 Replies
View Related
Sep 23, 2011
I am trying to configure remote access VPN to my network, i have a Cisco ASA 5510 IOS 7.0(7).
I configured the VPN using ASDM 5.0.9 and below is the configuration received:
access-list 90 extended permit ip 192.xxx.xxx.0 255.255.255.0 192.xxx.xxx.248 255.255.255.248
access-list ClientVPN_splitTunnelAcl standard permit 192.xxx.xxx.0 255.255.255.0
ip local pool VPNIpPool 192.xxx.xxx.250-192.xxx.xxx.252 mask 255.255.255.0[code].....
View 5 Replies
View Related
Dec 9, 2011
I configured one ASA 5510 firewall with CSC-SSM-10 in one of my customer location.
Here i want configure my firewall to send email alerts to particular mail ID, if anybody any access my network from outside( Like VPN users).
View 1 Replies
View Related
Dec 18, 2011
I have an ASA 5510. I am doing a new install at our new data center. I am having trouble getting internet access from an inside LAN interface to the outside WAN interface.Our colo center has given us the below IP info. [code]If I do a static config on my laptop of IP 198.145.XXX.82 Mask 255. 255. 255. 240 DG 198.145.XXX.81 I am able to get the web fine from the line in our rack. I used the ASDM software to setup the ASA. I set its WAN IP of 198. 145. XX X. 82 and mask as 255.255.255.40 for interface 0/0. For interface 0/1 I made a management LAN of 192.168.180.1 with mask of 255.255.255.0.I can connect to my LAN ok but do not have outside internet access. I have also tried .80 and .81 for the WAN IP of the ASA. [code]
View 8 Replies
View Related
Dec 9, 2012
I have to configure a default-factory firewall (ASA 5510) in a simple scenário like this image represents:At this moment i have configured the interfaces as represented above and at this moment what i want is grant access from a LAN computer (10.10.0.0/24) to the internet.
Should i configure some acl? I read that all traffic from an interface with a superior security level to other interface is allowed, so since my inside interface has a security level of 100 and the outside 0, it should be possible access to internet from an inside computer?!
From all configurations and examples i have seen around, they all contemplate a fixed IP address from the ISP, but in my scenário i have a dynamic one. This fact matter for the configuration i want to do?
My firewall is running the software version 8.2(5).
View 7 Replies
View Related
May 10, 2013
Cisco ASA 5510 and I want to configure it as an access gateway following this .[URL] the basic configuration steps on what to do on ASDM.
View 2 Replies
View Related
Dec 4, 2011
i have Cisco 5505 and i configured a remote VPN clients. here is my scenario
Cisco switch 2950 === holds two private network 192.168.8.x and 192.168.4.x
vlan 2 outside interface - Eth 0/0 155.155.155.x
Vlan 1 inside interface -- Eth 0/1 192.168.8.180
VPN pool ip address = 192.168.8.100 --110
I drag i cable from my Cisco switch and put in to Eth0/1. and i want to access this two private networks 192.168.4.x and 192.168.8.x . Now i can access to 192.168.8.x . But i can't access 192.168.4.x ..
View 3 Replies
View Related
Mar 14, 2011
I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration [code]The vpn goes up and I get an ip address, but it's impossible to reach the internal network. [code]
View 9 Replies
View Related