I have a router, networking 2 computers. One of them I wish to set to "ad-hoc" I do not want it accessing the internet.
So, a "wired ad-hoc".
The best discriptsion I have is on a Vista or 7 machine you have the Network map I want to disconect the computer from the internet, and leave it connected to the network.
I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.
Is it possible to assign a name to your private network so I dont have to type the ip address and port # each time?
View 5 Replies View RelatedI have two Win XP machines. One is connected to the LAN and the other is a standalone. I have installed an additional network card on the machine connected to the LAN. That machine is linked to the standalone through a switch using the 162.198.1.xxx sequence of IPs, with 255.255.255.0 as the subnet mask and no DNSWINS, or anything else. I can ping either machine from the other through the private network, but cannot see the files. I need to pull certain files from the standalone, but have not been able to even see them.
View 4 Replies View RelatedI want to add server(Intel PC with 2.8 P4 processor, 1GB RAM and 80GB harddisk) to my private network (not accessible from outside).I have 50 users in my network ( approximately 30 users login at same time)what simple good things that I could have on the server( website, forum,...) and what OS should I install on it?
View 5 Replies View RelatedI'm starting college in the fall and will be living in the dorms on campus. I want to have a "private network" setup within the university's network in my dorm room so my and my roommate's phones and iPads can still find my Apple TV, file sharing and network drives are still possible, and I can easily set up my network printer. Obviously, I don't want to lose Internet connectivity. Can I use NAT to accomplish this without losing Internet connection through the university?
how the sysops will hate me if they find me, I know this. It's not for malicious use, only for ease of use of my devices.
This may be totally off base, that's why I'm asking if this will work before I try it. I have an old WRT54G I would like to use if its capable, if not I'll buy a new one but I'm trying to avoid that. Here's what I'm thinking:
My router plugged into the University's Ethernet port in my room (for this setup do I use a LAN port or the WAN port on the router?) DHCP disabled, all devices static IP On the "Advanced Routing" tab: "Router" mode, not "gateway" mode What should my destination LAN ip be? Gateway? LAN & Wireless or WAN?
Switch connected to the router
Devices connected to the switch or connected wirelessly Should my gateway and DNS on each device be the host address assigned to my router?
I get an Ethernet cable from his router in my unit. I also have my own router. I was wondering if there is a way for me to create a private network for myself using my router and still have access to internet?
View 1 Replies View RelatedI want to share my two webcams on my private network.
View 1 Replies View RelatedI have a VPN with a number of servers where we are doing some software development. We have a TFS, Web, App and SQL Server etc.. inside a private LAN which is accessible via VPN. Nothing inside the private network can access outbound. However, I would like to open the Web Server on the private LAN to be able to be accessed via http(s).As we develop the software I want to access the site from the internet.It's a fairly simple setup.DSL > Modem > Home Lan. On the Home Lan I have a Server (2 ethernets) connected to the modem router and the other card to a hub. This server acts as the VPN server, DHCP etc.. for the Private LAN.The web server I want to be able to access from outside is the one inside the private network. Any recommendations?fyi, I'm not a networking guy, I hacked my way through setting up the private network through a number of great YouTube videos, that saved me a lot of time.
View 2 Replies View RelatedMachine is Dell Inspiron 530 windows vista. i cannot get on any network. command prompt just tells me a bogus ip 169.xxx.x.x when i go to the network setting it just keeps saying "identifying" can see anything on the net work. cant ping anything and when ever i try to enable network discovery and switch to private network just give me an error message saying "request is not supported".the machine was infected with "open could security" fake anti spyware program and was removed. used MW bytes and Super Anti. didn't find anything, also used HJT to make sure no process' were running that shouldn't be. made sure the services that were suppose to be running. only one particular one would not start it was called "server" just kept saying it was stopped because it was not being used?
View 8 Replies View RelatedI wish to establish a private and guest network for a local business. They have Verizon service with its wireless router plus their own personal wireless router.The Actiontec mi424wr (rev i) wireless router is connected via Coax and will remain the first in line so as not to disrupt the set top boxes (STB) channel guide and other features managed by the Actiontec. The radio is active with an SSID of "ABC-Private" and its network is 192.168.1.xx. The thought is that only business personnel will connect to this router for internet.I have connected their Linksys WRT54GS to the LAN port of the Actiontec, using a static IP which I have allocated in the Actiontec's DHCP pool for this purpose. This radio is active with an SSID of "ABC-Guests" and its network is 192.168.2.xx. The thought is that only patrons will connect to this router for internet.
My overall goal is that business personnel will have unrestricted access to the internet AND to each other¦ while patrons will only have HTTP and HTTPS access to the internet¦ and no communications will be permitted between the two network subnets. I realize there are hardware firewalls designed for accomplishing such a goal, but the business hopes to avoid the additional expense, if the aforementioned model can provide this capability.In order to accomplish this goal, my remaining tasks as are follows:
1. On the Linksys, permit only http and https traffic (and whatever else the patrons would need/want).
2. On the Actiontec, deny Linksys IP address access to everything except for the Actiontec gateway.
how can we login into the private network from Remotely in Switches and firewall or Routers,
View 5 Replies View RelatedI have an existing network with several computers running Vista and XP. My new computer has Windows7. The WIN 7 computer can access the router and the internet. But it is invisible to the rest of the network. It is currently set up as "private network". I think it should be "public network". How / where can I change it ?
View 1 Replies View RelatedI am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
View 1 Replies View Related1.create a drawing showing a private routed network.
2. On this drawing you will show your placement of the following,why they were placed there (you can use one or more of the servers/router listed in your drawing):
I was looking to setup a y configuration of routers with a modem going to master router, then from the mater router LAN ports to two other routers wan ports to give a guest and private network. I understand that this will all work fine for normal web surfing but can be very long winded when setting up port forwarding which i would need on the private network so I was wondering if I could get around this by setting up a DMZ on the master router for the private network router allowing all the port forwarding to be taken care of by just the one router. Would this work and would the two networks still be secure from one another.
View 8 Replies View RelatedMy partner imposes that i create a VPN connexion with CISCO ASA5505 and send requests by public IPÂ on my private network.Is it possible to create NAT rules with this possibility?
View 2 Replies View RelatedIn my office we have a private LAN of 10.0.0.0 having no access to internet/broadband. To connect to internet, we do it by using broadbandconnection/Modem from MTNL. Both things require a separate NIC card. My query is "Can I use my BroadBand Modem to connect to internal LAN". I have heard this is possible by some suitable changes in Current Control Set in Windows
View 3 Replies View RelatedI have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options. I'm hoping to use this since it's low profile. Many to one NAT should accomplish this, correct? The larger network should only be able to see the one device and not the clients behind it on the private network?
I'm planning to set up a network with two routers and one cable connection. One router will be for public wifi at my business and the other will be for my Point of sale system and private use. I think I have it figured out but want to double check the set up. Someone tell me if this isn't correct or if there's a better way of doing it.Cable modem --> connect via ethernet to Router #1 WAN port. Router #1 Lan port 1: connect via ethernet to router #2 WAN. Now, router 1 and 2 will have two different subnets; 192.168.1.x and 192.168.2.x respectively. Router #2 is the one that I should use for my private network and for the POS system since it can't be accessed by users from router #1 correct? I have DD-WRT installed on both routers but I plan on putting Tomato firmware for router #1 to limit bandwidth for public wifi and keep DD-WRT installed for router #2.
View 1 Replies View RelatedI'm setting up a Cisco ASA 5510.I did the setup for my public and private interface.From the management software I can ping any outside domain using my public interface, but when I try to do that from my private interface I cannot.Also for some reason my ip phone connected to the private interface work (I'm able to make and receive call), but any computer that I connect to the private interface I cannot access the internet.
View 1 Replies View RelatedI'm trying to set up this 1130AG with a private wireless network and a guest wireless network. Initially it had just one wireless (private) and it worked fine, but then when I created the two VLANs for each SSID and then the guest SSID and now the guest SSID is visible/broadcasting, but the private SSID has disappeared or is off.
P.S. - It's a Cisco Aironet 1130AG (AIR-AP1131AG-A-K9) running 12.3(8)JEA system software and I'm using the web GUI (I'm not familar with the command line for Cisco products yet).
I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere.
Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. [code]
I have set up a private domain network at home. I have a domain controller, a DNS server, and a DHCP server all running on one Windows 2003 Server machine. I have about 10 other machines around the house, getting their IP addresses from this DHCP server.
I have a Netgear WNDR3700 router.
I am about to get 5 public IP addresses from my ISP, and I would like to make some of these machines publicly accessible (while still accessible from the other machines in the network).
I found this link that says on my web server (one of the public machines), that I should use a second NIC and set that up to connect to my router (and get a private IP address from my DHCP server).
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies View RelatedWhat I'm trying to do is create a private network for local file sharing but also have internet access. There is a WRT54G router connected to a satellite modem in a separate building, just barely close enough to connect from my laptop, which is what sparked my original idea to use my WRT54GL as an access point.
View 1 Replies View RelatedI'm trying to achieve a site-to-site ipsec tunnel to a Cisco ASA 5520. Most examples feature the ASA with a public interface that terminates the tuennel and a private network on another interface that the tunnel interacts with. Where my scenario differs is that the interface that accepts the tunnel is part of a public /29 network where I want the remaining hosts on that subnet to be able to route thrugh to the other end of the tunnel. My tunnel gets established, but any attempts to route via the IP assigned to that one interface result in the ASA rejecting traffic. If so, what configuration options should I consider?
View 5 Replies View RelatedMy plan is to use VLAN1 for the internal private network and VLAN2 for free public wifi. My question is can I use a PC on VLAN1 to configure/manage my access points? There are no dedicated PCs on VLAN2.
View 7 Replies View RelatedI named my network "abc," and the system appends "-guest" to it, i.e.., "ABC-guest", to use as the guest network name. I want to hide the name of the primary/private network completely. Why can't I do that? I know I can use a different password.Â
View 7 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedWe have configured a Cisco ASA 5505 with AnyConnect access. This works great. However, these users cannot seem to ping devices on the private network. We have configured all devices on the network with a 10.10.10.0/24 address space. The inside interface of the ASA i 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.They users can utilize SSH and Oracle or MySQL calls but cannot seem to ping.  Obviously, I am over looking something.
View 2 Replies View RelatedIs it possible to change one's private network name as well as SSID?
View 1 Replies View RelatedWhy is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02