Dir-615 Dlink Router - How To Setup Wifi Home Network
Oct 13, 2011
I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies
ADVERTISEMENT
Jan 28, 2012
How to install single port D-link wifi router through Modem "Single Port Wifi Router"
View 1 Replies
View Related
Jan 8, 2012
how to setup a home wifi network with windows 7?I want to access internet of the main laptop (has internet using a dongle)for my other laptop which has no direct internet connection at the moment, but wifi enable.
View 2 Replies
View Related
Apr 25, 2012
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
View 6 Replies
View Related
Sep 18, 2012
I'm newbie in Networking. I want to establish a small WLAN network where all the laptops (6 laptops) can use WiFi Internet and also can print via a network printer.I have these hardwares:1: DSL Modem2: A Belkin F5D8233-4 300 Mbps router3: A Network printer (with RJ45 ethernet port, Not wireless printer)4: LAN Cable (if needed)5: Finally 6 Client Laptops
View 4 Replies
View Related
Jul 2, 2011
I'm trying to setup my wifi at home and want to cover all the areas under same SSID and allow roaming cross since one router can not cover 20000 sq ft over 3-4 levels.I anticipate at least 8 if not more to cover everywhere.How do I setup a WLAN network for myself. I have a cat6 cable running in quite a few rooms.Basically my end game is have uninterrupted wifi access everywhere in the house Possibly run a SIP based PBX over wifi wherever possible, close to 24 extensions.I also laid down cat6 in most rooms to allow to setup my own central media server with that as well but that's a different topic and forum I guess.Can I use the cat6 coming into the rooms, connect it to the wifi router and provide Internet access over wifi and use the router as a hub to connect a cat6 from the router for the media player and another one to a sip based Pbx extension or have the Pbx extension be on wifi?Damn sorry for such a confusing and loaded sentence.
View 18 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Dec 31, 2012
I bought a D-Link DIR-655 hoping to get a faster connection over my Netgear WNR2000.I runs mostly fine apart from the occasional freezes and one other problem: youtube video's won't load. I can search and browse youtube, but when I click on the video, the page loads but the video just doesn't load. I can see the play/pause button and the circle telling use the video is loading. Then that's it. Nothing happens. When I plug back my WNR2000, Youtube videos load fine. Same thing on my roommate's laptop. I bought this router over a month ago so I can't return it, spending $80 on a piece of shit like is frustrating when living off a student budget. I'm just about to throw it out the window
View 1 Replies
View Related
Jan 6, 2012
I am having a tough time connecting these two routers wirelessly, i had connected a WRT54G Linksys software to the WRT54G DD-WRT router with no effort. But these two will just not connect.
View 1 Replies
View Related
Aug 10, 2012
Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?
View 1 Replies
View Related
Oct 7, 2011
I have 2 wireless routers. Belkin Wireless G plus mimo Model# F5D9230-4 Ver.3001 and a D-link Dir-615 ver.B2. I am using the Belkin router has my main router. The wife’s laptop and the Wii console connect to the router wirelessly. I also connect a few PC directly to the router via Cat5 cables which runs through most rooms in the house. Since the router is down in the basement in my control panel along side the cable modem and what not. This causes the wireless single to be pretty weak in certain parts of the house. What I was planning on doing is taking the D-link router connecting it to the wall jack upstairs to the internet port on the router. Then setting both routers to static and changing the Belkin router to DHCP?
View 3 Replies
View Related
Apr 15, 2012
1 Virgin media home home up stairs in the home office. Ether cable running from the home hub, outside the house to the downstairs lounge with an ethernet socket on the end. Cable from the socket into a dlink router (set to operate as a hub).My reason for this setup was due to the rubbish wireless signal from the virgin hub, and the fact that I have various other bits of kit downstairs that I could use an ethernet cable with.The question is, IF my laptops are connected to the router downstairs by an ethernet cable and I want to transfer some files between them, will the data be routed through the virgin media hub upstairs before coming back to the router that both laptops are connected to downstairs? I have just done a test with 30gb worth of files and the transfer speed was 8.7MB/second, is that good for wireless?
View 1 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Aug 25, 2012
Firstly I cannot get my Linksys RE1000 to work with my network having tried the set up CD on 2 computers (mac and windows). The main router is a BT Home Hub 2.0
The main router is in the basement where out internet connection enters the house, also in the basement is our LAN board where we have ethernet cables extending to parts of the house. There is weak wireless signal from groundfloor up to the top floor so wanted to find something where I could plug into the ethernet port and it would broadcast an wireless network to the upper floors/areas with a weaker signal. Thought the RE1000 would do this job but i can't get it to do it wirelessly let alone connect it to the main router using a ethernet cable.
View 2 Replies
View Related
Dec 25, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 2 Replies
View Related
Aug 4, 2012
I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies
View Related
Jan 29, 2012
How do I set up wifi at home if I don't have internet at home? would the mifi from virgin mobile work?
View 1 Replies
View Related
Aug 3, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies
View Related
Jan 26, 2013
I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599. I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed. I even tried to split the range in two parts, and still no success. I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.
View 3 Replies
View Related
Oct 13, 2011
At my workplace, we have high speed internet (dsl). We don't have Wifi or a full time tech guy at the moment. I was thinking about proposing it since I generally handle most of the technical items at my job, but wanted to verify a few things first. First of all.. on a work network.. is it any more difficult than your average home network to set up a wifi router? Anything special I should know before attempting to set one up?
View 1 Replies
View Related
Aug 14, 2011
Currently I am hosting a 7 day mountain retreat, for about 90+ people. Clearly they are dependent on the internet teet as am I I am trying very hard to provide internet to our friends, but I just can't seem to figure it out I have a Mobile Broadband Router (MBBR) which limits connected devices to 6, so I figured that if connect a home router with wifi (WIFI) that allows 253 connections problem solved right? So I put a short LAN cable from the LAN port on the MBBR to the WAN port on the WIFI and presto! The WIFI gets a IP address, but does not allow other users of the WIFI to get internet. I've even killed all security on the WIFI and put the WIFIs IP in the DMZ on the MBBR. I noticed the DNS was the same as the gateway on the WIFI, so I changed that to the DNS on the MBBR still nothing.
PS Yes I have a connection on the MBBR I am on it now.Connecting the LAN cable from the MBBRs LAN to the WIFIs LAN extends the range, and grants internet to the WIFI users... but uses the MBBRs DHCP to give IP addresses, which limits to 6.I guess the goal here is bypass the limitation of the MBBR by using the WIFIs DHCP to issue IPs?
View 2 Replies
View Related
Apr 16, 2011
I have a god-knows-which brand broadband router through which I access the net. This router has 4 ethernet ports. I have 2 laptops (with wifi obviously) & a desktop connected to the router by the standard LAN cable. I was wondering if I could network all the three through the router
View 3 Replies
View Related
Aug 4, 2011
Currently I have a small home network. Two desktops are connected to the router, which is wire-connected to the Time Warner modem. The desktops share folders, and there is a shared printer. Our laptop also accesses the network wirelessly. Yes, the network has a password.
We are students, and our school is installing free wi-fi in our building. I am only too happy to drop Time Warner. How can I maintain my current file sharing and printer sharing functionality without sharing with the entire WiFi network? Is there some way to allow my current router to access the WiFi and still use it for my home network?
View 1 Replies
View Related
Oct 20, 2011
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies
View Related
Nov 24, 2011
My Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies
View Related
Jul 20, 2011
I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies
View Related
Mar 20, 2012
I have a Netcomm router which I've had working as my ADSL and my wireless AP.I connected a DLink router via ethernet so as to extend the range of my WIFI.This has worked, but now I cant log in to my DLink router.It started with IP 10.1.1.1After setting it up to not do automatic dhcp and then plugging it in to my Netcomm (which is on 192.168.1) I can no longer find the DLink, whether connected over ethernet or wireless. How it might have had its IP changed as it join the network?
View 14 Replies
View Related
Apr 22, 2011
I have an issue with my work laptop connecting to my home network. It will connect to the internet but only briefly and then the connection is dropped. I reset or repair the connection and I can get it to re-connect but then it drops again after only a minute or two. I tried to connect it to the router directly with a cable (turned wireless off) and had the same issue. This laptop has no issues connecting wirelessly at work or to other wi-fi networks I have tried. I have another laptop in the house that has no issues connecting to the home network & internet. The issue seems only to be with this laptop at home. The laptop is a Dell using 64 bit Vista. The router is a D-link DI-524, 802.11g router and I have a DSL connection.
View 1 Replies
View Related
Sep 22, 2011
connect usb printer to d-link n2760 router i plugged in the printer diagnsotic failed
View 2 Replies
View Related
May 24, 2012
I have a Linksys E2000 router on my home network. The router has the newest version of firmware. Every once in a while, wireless clients on my network become "isolated". Here's an example of what happens. I set up a new wireless printer. I can print to the printer wirelessly from my phone, PC's, etc. all fine after setup. I'm thinking everything is cool!! Well after 2 weeks to 1 month this device will become "isolated" so I cannot print to it; it has an IP address, it can ping its gateway, but i cannot ping it from other devices on the same subnet. I know it's not the printer because if i unplug my E2000 and plug it back in, it works fine.
Another example. I have two windows 7 PC's that are on the same home group and i can share files between them. Sometimes it works and other times it doesnt. I can ping my gateway but they cannot ping each other. I would troubleshoot the issue like crazy from the host end, but the second i unplug my E2000 and plug it back in, BINGO they can talk. Something is wrong with how these routers function with hosts in inter-subnet communications.
View 2 Replies
View Related
Mar 20, 2012
I live in a new apartment building which means a lot of concrete. The internet (fiber) enters the house at the beginning where the modem is hooked up to my Linksys WRT320N. From there two cables run through the house:1 to the home office, where two computers are connected through a switch.1 to the living room, where the Xbox, blue-ray player are connected through a switch.I also have a wifi network running from my WRT320N, but as it is at the beginning of the house, there are some black spots in other parts of the house. I tried to fix this with a Netgear repeater, but that keeps disconnecting.
What I want to do know is place a second linksys device in the living room at the end of the already existing cable that will also broadcast a wifi network, but I want this to be exactly the same Wi-Fi network as I already have. What I want to achieve is that I can walk from one end of the house with my iPad, streaming a video, to the other end of the house and that I always stay connected to the internet and that my tabled just picks up the strongest broadcaster, basically the same as with a mobile phone.
View 1 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Feb 13, 2011
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies
View Related
