I have a god-knows-which brand broadband router through which I access the net. This router has 4 ethernet ports. I have 2 laptops (with wifi obviously) & a desktop connected to the router by the standard LAN cable. I was wondering if I could network all the three through the router
View 3 RepliesCurrently I am hosting a 7 day mountain retreat, for about 90+ people. Clearly they are dependent on the internet teet as am I I am trying very hard to provide internet to our friends, but I just can't seem to figure it out I have a Mobile Broadband Router (MBBR) which limits connected devices to 6, so I figured that if connect a home router with wifi (WIFI) that allows 253 connections problem solved right? So I put a short LAN cable from the LAN port on the MBBR to the WAN port on the WIFI and presto! The WIFI gets a IP address, but does not allow other users of the WIFI to get internet. I've even killed all security on the WIFI and put the WIFIs IP in the DMZ on the MBBR. I noticed the DNS was the same as the gateway on the WIFI, so I changed that to the DNS on the MBBR still nothing.
PS Yes I have a connection on the MBBR I am on it now.Connecting the LAN cable from the MBBRs LAN to the WIFIs LAN extends the range, and grants internet to the WIFI users... but uses the MBBRs DHCP to give IP addresses, which limits to 6.I guess the goal here is bypass the limitation of the MBBR by using the WIFIs DHCP to issue IPs?
i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.
View 1 Replies View RelatedI have a Linksys E2000 router on my home network. The router has the newest version of firmware. Every once in a while, wireless clients on my network become "isolated". Here's an example of what happens. I set up a new wireless printer. I can print to the printer wirelessly from my phone, PC's, etc. all fine after setup. I'm thinking everything is cool!! Well after 2 weeks to 1 month this device will become "isolated" so I cannot print to it; it has an IP address, it can ping its gateway, but i cannot ping it from other devices on the same subnet. I know it's not the printer because if i unplug my E2000 and plug it back in, it works fine.
Another example. I have two windows 7 PC's that are on the same home group and i can share files between them. Sometimes it works and other times it doesnt. I can ping my gateway but they cannot ping each other. I would troubleshoot the issue like crazy from the host end, but the second i unplug my E2000 and plug it back in, BINGO they can talk. Something is wrong with how these routers function with hosts in inter-subnet communications.
I live in a new apartment building which means a lot of concrete. The internet (fiber) enters the house at the beginning where the modem is hooked up to my Linksys WRT320N. From there two cables run through the house:1 to the home office, where two computers are connected through a switch.1 to the living room, where the Xbox, blue-ray player are connected through a switch.I also have a wifi network running from my WRT320N, but as it is at the beginning of the house, there are some black spots in other parts of the house. I tried to fix this with a Netgear repeater, but that keeps disconnecting.
What I want to do know is place a second linksys device in the living room at the end of the already existing cable that will also broadcast a wifi network, but I want this to be exactly the same Wi-Fi network as I already have. What I want to achieve is that I can walk from one end of the house with my iPad, streaming a video, to the other end of the house and that I always stay connected to the internet and that my tabled just picks up the strongest broadcaster, basically the same as with a mobile phone.
our windows PC's will connect to the home (wireless) network briefly (~15 sec) and then lose the internet connection. The wireless connection seems to stay strong. During that period any browser activity will result in a DNS error message and the Win7 network signal shows strong but not connected to the internet. We tried setting static IP addresses on the PCs but no luck. A number of PC's all running Win7 exhibit this issue.After 5-10 min it reconnects and everything is normal.Network is a 20 mbs cable based system.
View 1 Replies View RelatedAt my workplace, we have high speed internet (dsl). We don't have Wifi or a full time tech guy at the moment. I was thinking about proposing it since I generally handle most of the technical items at my job, but wanted to verify a few things first. First of all.. on a work network.. is it any more difficult than your average home network to set up a wifi router? Anything special I should know before attempting to set one up?
View 1 Replies View RelatedI's studying for my Network+ exam, and I somewhat confused when reading up on internet protocol. Is PPP only used for Dial Up connections, or also with Broadband? And what type of encryption if any does it use?
View 1 Replies View RelatedI have a general networking question regarding VLANS, multiple broadband connections and accessing PC's on both setups from each other.What I would like to do is have 2 broadband connections, one a cable connection and one a DSL connection. I would like to run them both through a Netgear FS-726T switch. Since the cable connection will go through a Linksys router giving out I.P.s in the range of 192.168.1.x and the DSL will probably use the same range, I would like to keep specific PC's connecting through the DSL connection and some other PC's specifically through the cable connection. I THINK that this can be done via the use of VLAN's set up on the Netgear switch but I am unfamiliar with setting them up. I've read through the manual and researched it online but I must be missing something. Just can't seem to figure it out so it's time to ask the experts. Due to the bandwidth limitations on the Comcast connection, I would like to avoid any data coming from the PC's on the DSL connection from going out through the cable connection (I do customer support for my business and want customers to be able to access files on my file server and also be able to back up their PC's online to my backup server but on the DSL connection. I will eat up my cable bandwidth in a hurry just from the backups alone. I would like to set up all the PC's with static I.P. addresses if possible. Now, I also need to be able to remotely access any of the PC's from outside my network (which I can do now) but I need to be able to access the cable connected PC's from the DSL connected PC's and vice versa.
View 1 Replies View RelatedI have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies View RelatedCurrently I have a small home network. Two desktops are connected to the router, which is wire-connected to the Time Warner modem. The desktops share folders, and there is a shared printer. Our laptop also accesses the network wirelessly. Yes, the network has a password.
We are students, and our school is installing free wi-fi in our building. I am only too happy to drop Time Warner. How can I maintain my current file sharing and printer sharing functionality without sharing with the entire WiFi network? Is there some way to allow my current router to access the WiFi and still use it for my home network?
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies View Relatedi have triple storey house. in all three floors a broadband connection point (rj45 jack) is there. i have connected one wireless router in 3rd floor. but the signals are not coming on second floor. can i connect netgear wireless access point with one ethernet point in the 2nd floor broadband connection jack (Rj 45), to access wirelessly my internet?
View 1 Replies View Relatedmy gateway laptop, running vista 64 home premium, cannot connect to the internet at home. connects straight to the modem via ethernet. displays as 'unidentified network'. according to the Atlantic BB tech(my ISP), my laptop is not obiaining an IP addy from the modem. The modem seems good, and the tech could see the modem from his end, but no IP addy from the laptop. ran ipconfig /all from home and the gateway was 207.255.36.1(preferred) instead of 192.168.x.x So i'm stumped with no net at home. the ipv4 properties do have the obtain automatically button checked, and dhcp is enabled. had the tech reset the provisioning on the modem & he said the mac addresses were cleared already. i reset the ipv4, ipv6, and winsock. haven't gotten anywhere. tech's last advice was to bring the modem back and swap it for another one.
View 1 Replies View RelatedMy Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies View RelatedI have a Netcomm router which I've had working as my ADSL and my wireless AP.I connected a DLink router via ethernet so as to extend the range of my WIFI.This has worked, but now I cant log in to my DLink router.It started with IP 10.1.1.1After setting it up to not do automatic dhcp and then plugging it in to my Netcomm (which is on 192.168.1) I can no longer find the DLink, whether connected over ethernet or wireless. How it might have had its IP changed as it join the network?
View 14 Replies View Relatedwhat is my wi-fi network ssid and security no
View 3 Replies View Relatedhow to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies View Relatedi have not needed my wi-fi pasword for 3yers. I cannot remember or find it. The isp is Orange (EE). I do know the wi-fi name.
View 2 Replies View RelatedHalf of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies View RelatedIn the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies View RelatedI run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies View RelatedNeighbor agreed to let me use his WiFi connection only if it requires no changes or disruptions on his side. His signal is broadcast with a wireless router. I can currently see his signal broadcast on my laptop, but it's very weak.I have a omnidirectional antennae already mounted outside my house with a clear sight of view. It has a cable attached to it that terminates with a N connector inside my building.I need to connect to his signal (there are several being broadcast in the area) and then forward it to my router. My router will then provide connectivity to my home network.What hardware do I need between the outdoor omnidirectional antennae (that terminates with a N connector) and the wireless router inside my building?
View 9 Replies View Relatedhave a home network setup that works completely fine everywhere in the house except one room. That room happens to be my son's room that has his Xbox 360 in it. He wants to play online but I cant get a signal back in there and if I do it is extremely weak. I have a linksys E2500 router connected to my cable modem that is wired ot one computer and then my 2 laptops connect to the wireless from that router. The Playstation 3 that is about 15 feet away works fine as well. All our ipods and iPhones work well too. It is only his bedroom where we run into trouble with any of these devices. I actually just upgraded to the E2500 about 2 months ago, so I have a Motorola WR850G sitting around. Can I use this closer to his room to lengthen my signal or how can I proceed to get him a better signal
View 2 Replies View RelatedI can't connect connect to my home wireless network. It says I am connected but none of my browsers will load anything. I can connect to other wireless networks that i have access to.I can connect if i plug into the router directly
View 3 Replies View Relatedit shows that it is Online getting an Excellent Connection thru my Home Network... I go Online using Firefox with it at home.. stays up for a few minutes .. can get onto the internet...then loses the ability to stay connected.... it still states it's Connected though ... kind of baffling... like something is timing out then blocking it...I tried shutting down my AVG Anti-Virus.. also shut down Windows Firewall... it still continues to lose the Connection while stating it's connected getting a good signal... both of these are configured correctly as far as I can seeI've re-installed my Wireless driver thru the Acer Recovery Management included on the Netbook.. still no good..
View 2 Replies View RelatedAd hoc network may created between two PCs either with, wifi or a RJ-45 Crossover cable?
View 7 Replies View RelatedKindle 3rd generation. I just got it recently
I've tried restarting my Kindle. I've tried resetting my router. I've reset my Kindle. I can use it to connect to open wi-fi networks. My computer (win7) and phone (htc desire) can connect to the wi-fi network. MAC filtering is disabled. Router is a Buffalo WCR-GN
I recently got my laptop fixed after it being out of commission for about a year (it turns out there was just too much dust collecting in it) and when I got home and tried to connect to my wifi network, I didn't have internet access. I received a message that said I had sucessfully connected to my network but it was only a local connection - no internet. It also shows up as "Unidentified Network." This is peculiar to me because my boyfriend's laptop is able to connect to the internet wirelessly just fine, and I am currently using the wifi on my iPhone. I ran the ipconfig and several ping tests in cmd and used a wifi inspector.
Windows IP Configuration
Host Name . . . . . . . . . . . . : owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
I have my computer with me and I can not get internet access using my friends wifi at her home. when I attempt to join their network I enter the password and it says I am connected and also says unidentified network. I go anywhere else and can use my computer with all other wifi networks.
View 4 Replies View RelatedHow to use my iPhone 5 using 3G or LTE to connect to my home wifi network so I can control things like my airconditioner (using the supplied app) which is also connected to the home wifi network?I have a WHS a Windows 8 machine and an XP Pro machine. I am using a Linksys WAG320N Router/Modem.
View 1 Replies View Relatedim using microsoft network monitor to monitor all traffic in and out (public) and mirrored ports for local traffic, except wireless traffic as its connecting to the router. I want to use a wifi NIC on the server to broadcast, so wireless clients can connect via the server and obtain DNS and DHCP etc from there, therefor, monitoring all traffic.
View 7 Replies View Relatedlost wifi access thru local (home) connection. can connect thru public network. my grandma during last visit accidentally changed the network to her laptop. Have tried to reset netgear wnr2000v1 with pin in back. turned off and waited and turned back on again--no success. have tried to set up new network--see the network listed but no internet access available. have modem/router from comcast. My laptop is Acer Aspire 5733 with Lan Broadcom and wireless lan atheros.
[code]....