Dlink Dir-655 Router - Unable To Run ATT Setup Disk
Jul 20, 2011
I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies
ADVERTISEMENT
Jan 5, 2013
I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?
View 4 Replies
View Related
Feb 10, 2009
I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?
View 9 Replies
View Related
Apr 25, 2012
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
View 6 Replies
View Related
Oct 13, 2011
I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies
View Related
Sep 22, 2011
connect usb printer to d-link n2760 router i plugged in the printer diagnsotic failed
View 2 Replies
View Related
Jan 28, 2012
How to install single port D-link wifi router through Modem "Single Port Wifi Router"
View 1 Replies
View Related
May 3, 2011
i can't access the internet without the internet setup disk.I don't have it anymore does anyone have a spare
View 19 Replies
View Related
Mar 25, 2011
windows xp trying to setup wireless network in home.i dont know what my wpa key.
View 1 Replies
View Related
May 31, 2012
I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies
View Related
Mar 23, 2012
set up of the router? There's so many options, manual internet set up, automatic internet set up, networking setup.The Quick CD installation got stuck trying to find the router. Do i need to connect the ethernet wire to my modem then connect my computer to it wirelessly? Do I need to connect the ehernet wire to my modem and connect my computer to it via another ethernet port in the router? Do I even need to connect my ethernet wire to my modem in the first place?
View 12 Replies
View Related
Aug 13, 2012
With converting my hp 7410 printer to wireless. It has wireless capability but i do not have the factory setup disk. What can i do?
View 1 Replies
View Related
Apr 1, 2011
I have twho Windows 7 laptops that I want to connect to a Time Capsule, I have no problem at all with one of them, but the other laptop is giving me the error in my question
View 1 Replies
View Related
Aug 27, 2011
When adding a new 256M card to ant slot on BXL SUP, it shows up in log as inserted, but am unable to format it and of course access it. I tried formatting to FAT16 on my MacBook, card gets formatted but remains unaccessible.
View 2 Replies
View Related
Oct 16, 2011
What is the best security setup for this model!
View 1 Replies
View Related
Apr 8, 2011
I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.
View 5 Replies
View Related
Feb 6, 2013
My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
View 1 Replies
View Related
Apr 2, 2012
I just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.
View 1 Replies
View Related
Jan 26, 2012
Using the quick set up of DIR-600 from the CD, I encounter this message:"Your new router does not appear to be connected properly.Follow these steps:
1)Make sure that your are connecting your new router...
2)Make sure the ethernet cable from your PC is securely...
3)Click Retry to try installing your router again."
I tried all several times and still I end up on that screen message.
View 5 Replies
View Related
Nov 4, 2012
So i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing
View 3 Replies
View Related
May 11, 2013
I just bought a new router for my home network. It is the Cisco linksys EA4500. It looks great and is rich with features but I just wish I didn't buy it!
My old wireless router started to have its wireless signal very weak, hence this new linksys router. When it is time to setup the router, I just did what was supposed to be done(which is very straight forward, just a matter of choosing pppoe and inputting a username and password) and went ahead to test the internet connection which didn't work! Upon inspection, I discovered that the lights on the internet port on the router(WAN port) didn't turn on at all as if the cable wasn't connected. I quickly checked all connections and to kill any doubt I reconnected the cable to the old router to make sure it is working and it worked. So there is nothing wrong with the cable!
I tried everything one can think of to no avail. The only conclusion one would draw from this whole scenario is that the new router is bad. So, I took it back to the shop I bought it from and before giving me another one, he said he will test it out and I said okay. Surprisingly enough, it just worked !!! Don't ask me why but it just did work beautifully, although at my house if you plug the cat6 cable(that you know for sure has internet) into its internet port, it won't even turn its lights on.
View 19 Replies
View Related
Mar 17, 2012
I have a Hawking 300N and I have misplaced my disk and I neing walked through this to have it set back up. I hooked it all up correctly and it says no internet connection
View 1 Replies
View Related
May 12, 2012
Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.
View 1 Replies
View Related
Feb 22, 2012
I'm unable to access the web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'. However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.
View 3 Replies
View Related
Jun 13, 2012
I'm using Linksys WAG200G Wireless modem and connection mode is "Bridge Mode Only", in this mode I'm not getting the 192.168.1.1 setup console and Wifi facility.
View 3 Replies
View Related
Jan 14, 2008
I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed." I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it.
View 9 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
May 29, 2012
How do I install or get a installation disk for D-link model dir-601 Router
View 1 Replies
View Related
Jul 19, 2012
I've lost my set-up disk for my Linksys model WRT160N V3.
View 1 Replies
View Related
Sep 23, 2012
I plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies
View Related
Sep 3, 2012
I am doining a flsh upgrade for 12000 router ... I am following this guidelines
[URL]
when i do show version | i image System image file is "disk0:c12k-os-mbi-3.6.0.CSCsy28524-1.0.0/mbiprp-rp.vm"
but at doc it says : System image file is "disk0:c12k-os-mbi-3.6.0/mbiprp-rp.vm" i think my image has something wrong. what do you say ? actually from step 1 to 16 was going smoothly , but step 17 doesnt go ... and i jump to Flash Disk Upgrade Abort Procedure section and i rollback to old flash disk and now it is working ....
Regarding to step 17, why standby PRP is not ready , it shows no valid partner ?
View 7 Replies
View Related
Oct 19, 2012
Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?
View 2 Replies
View Related
Aug 7, 2011
I looked around on the forum here for info, but couldn't find anything. I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page. I have updated to the latest firmware.
View 4 Replies
View Related
