When adding a new 256M card to ant slot on BXL SUP, it shows up in log as inserted, but am unable to format it and of course access it. I tried formatting to FAT16 on my MacBook, card gets formatted but remains unaccessible.
View 2 RepliesTrying to salvage a Dell Inspiron 7500 laptop but am stopped no matter what I have tried when attempting to download non-Dell applications. I just reformatted (non-Dell) and loaded it with Win98se and then all the drivers that seemed to apply from Dell... they all loaded fine. But when I try to download drivers in a zip cabinet for my (example) Netgear wireless adapter, I get this error message, “Cannot read from the source file or disk.” This has happened with other packages also. No matter if I use a flash drive or in board CD/DVD or the out board USB CD/DVD.One blog said they tried this tool called “long path tool,” to overcome the problem, however, I cannot get it to load either and get the same message. # 1. This computer has half a gig of memory in it, so is that the problem? 2. Will a wireless adapter even work in this machine? I would gather updates by using a hard line but I have high speed Ethernet and this only has a dial-up phone line connection built in. A couple other points that are probably important to share the battery is dead and I have not looked in the bay yet to see what happened. Secondly the screen when I move it to a certain angle it shuts off (it is not touching the button), seems to be a loose connection.
View 3 Replies View RelatedHow can I remove viruses from my flash disk USB
View 1 Replies View RelatedI am doining a flsh upgrade for 12000 router ... I am following this guidelines
[URL]
when i do show version | i image System image file is "disk0:c12k-os-mbi-3.6.0.CSCsy28524-1.0.0/mbiprp-rp.vm"
but at doc it says : System image file is "disk0:c12k-os-mbi-3.6.0/mbiprp-rp.vm" i think my image has something wrong. what do you say ? actually from step 1 to 16 was going smoothly , but step 17 doesnt go ... and i jump to Flash Disk Upgrade Abort Procedure section and i rollback to old flash disk and now it is working ....
Regarding to step 17, why standby PRP is not ready , it shows no valid partner ?
How to force the Cisco 1811 Router to read a Transcend CF 128MB? [code]
View 2 Replies View RelatedAt each time I open the internet page,at the left in the bottom of the page near of the STARt buton, it's written:"Error on page".And like that I can't read my emails on YAHOO and I can't post any picture in FACEBOOK.
View 10 Replies View RelatedI have twho Windows 7 laptops that I want to connect to a Time Capsule, I have no problem at all with one of them, but the other laptop is giving me the error in my question
View 1 Replies View RelatedI have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies View RelatedMy client has had to replace their ASA 5510. Upon importing the image to the brand new ASA they are unable to write to the flash.
They have run fcsk disk0: to no avail. show file system show 0 and 0 for Flash size and Free space on disk0.
Is there anything that can be done, short of formating flash and trying to reinstall the image? I have asked them to reload the ASA but they are reluctant to do so as they don't want the site to lose connectivity.
I m unable to take backup of Switch c2960 using
#Copy flash: tftp
while i m taking it show some error
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
sh flash:
Directory of flash:/
2 -rwx 1919 Mar 1 1993 10:27:17 +05:30 private-config.text
3 -rwx 11056 Mar 1 1993 10:27:17 +05:30 config.text
4 -rwx 804 Mar 1 1993 05:30:42 +05:30 vlan.dat
6 -rwx 2072 Mar 1 1993 10:27:17 +05:30 multiple-fs
7 drwx 192 Mar 1 1993 05:37:02 +05:30 c2960-lanbasek9-mz.122-44.
SE6
I am trying to recover a WRT54GS v1 router from a bad flash. The power light is blinking and would not accept pings. Since I figured it was already hopeless, I attempted shorting pin 15 and 16 which cause it to start receiveing pings. My problem is it won't accept the tftp flash, I've tried both cmd prompt and auto upgrade utility. Upgrade utility says "Unable to get response from the server" however it is still accepting pings. Cmd prompt TFTP says it can't read from local file. I am using windows XP. Code...
View 3 Replies View RelatedTrying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies View Relatedi have a 1841 Router that hang up @ boot.
Output:
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcdc3e0
[Code].....
I am trying to change SNMPv2 community string on 6509 remotely, without using expect script. I tried EEM applet (we cannot use TCL scripts), but it does not work. EEM command "action 10 info snmp oid 1.3.6.1.2.1.1.4 get-type exact" is supposed to store the result into an environment variable. It does not. Or at least not in the one that is documented. Is it a bug? We have IOS 12.2(17r)SX5. To get EEM version i ran "sh event manager version" and got "eem: (v240_throttle) 2.21.32". Does it mean i have EEM version 2.21?
View 6 Replies View RelatedI am using ACS 5.3 with the internal Database for user authentication, I would like to attribute to some users read only rights on the systems. by not configuring an enable password for these users?
View 2 Replies View RelatedI can create a read-only account on the ACS 5 server? I have the ACSAdmin account.
View 1 Replies View RelatedI'm switching from using a wireless usb adapter to a wired connection via ethernet cable.
When I plug the ethernet cable in however nothing happens, I've tried using it with a different computer and it works like a charm but this one doesn't seem to be working right.
HP Pro Small Form Factor 3010 Windows 7 32bit (Other computer was using windows vista)
Windows IP Configuration
Host Name . . . . . . . . . . . . : HPPro3010
Primary Dns Suffix . . . . . . . :
[Code]....
i have issue with whenever i m trying to download any file it's get upto almost 95-98%,but after suddenly stop.this issue with firefox, chrome browser
View 1 Replies View Relatedam looking for free software to read pdf, etc.
View 4 Replies View RelatedWe are using ACS ver 4.2 and trying to setup users with limited access to our switchs and routers. Here is what we did:
1) Created a user in ACS
2) Create Shell command Autorization Set - ReadOnly
Unmatched Commands - Deny
Commands Added
show
exit
* this should limit the user to the show and exit command only (correct)?
3) Created a group - HelpDesk with the following TACACS+ Settings
Shell (exec) is checked
Priviledge level is check with 15 as the assigned level
Assign a Shell Command Authorization Set for any network device - selected
ReadOnly - shell command autorization set seleted
When the user logs on to the router/switch it appears that he has full access. He can enter the enable command, config terminal command, etc. All we want him to be able to do is to issue the show command.
I am trying to configure a 1941, but the router boots into readonly rommon . after configuring the router and copy running config to startup config, on reboot, none of the changes are saved, and boots back into readonly rommon
View 2 Replies View Relatedcannot read and receive emails
View 1 Replies View RelatedI am currently facing a major problem. I am a user of the Smart FTP software and have several files in it.However, the "Sites" folder is showing a blank screen. It shows nothing, when there are supposed to be at least 30 files.
I think I have discovered the cause of this; the "Read" permissions are off. Here is where my problem comes in, when I enable it and select "Apply Changes Recursively", it goes back to the unchecked "Read" permission. It doesn't seem to take into account the fact that I want to enable it.
I am currently using Time Warner Cable as my internet provider and I have been experiencing very slow internet connection speeds for the past few weeks. This has happened across multiple laptops and desktops both wireless and wired connections. I have done a ping and tracert test but am unable to read the results.
View 7 Replies View RelatedI have a motherboard intel DG41RQ and it has a built in lan card but i wanted to put another lan card via the PCI express slot and i put it and the flash lights on the network card are flashing but still the hardware manager and everything on the computer haven't even noticed that i put a new hardware.
View 36 Replies View Relatedtried to read the NEXUS 5000 cpu load: cseSysCPUUtilization 1.3.6.1.4.1.9.9.305.1.1.1 but there is a timeout: Timeout: No Response from 10.100.224.16 Other MIB values readout, like the system value, is ok.We use snmpv3.
View 4 Replies View RelatedI am getting the following problem each time i restart the router
%Mainboard-2-initfail: read failure - device @ 0xA8
It does trows a lot of this errors and then restarts again making a clycle of the problem i have no clue what is going on.
Is there a way to create an account for the ASA using ASDM that is only read only and cannot make firewall changes?
View 1 Replies View RelatedAny tcp client software other than telnet and can read data in other formats than ASCII ? the problem i am facing with telnet is that it only reads ASCII format.
View 6 Replies View RelatedI have a network hard drive (NAS) in my LAN. I would like that a few computers in the LAN were able to only read but not write and the other computers could both write and read. Is there any way I could do this?
View 2 Replies View RelatedI was using the household Ethernet cord this morning and it was working normally. Then I stopped using the Internet to do a program tidy up. - there were a few program's that had been extras to other program's I don't need. Then I went to use the Internet again and it wouldn't connect through the Ethernet cord. I was able to establish that my computer is still able to access the Internet through wireless (which we don't often use on account of it been spotty). Could I have done/deleted/turned off something that allows my computer to read Ethernet cords?
View 2 Replies View RelatedI connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies View Related