Cisco Firewall :: ASA 5510 - Unable To Write To Flash
May 9, 2012
My client has had to replace their ASA 5510. Upon importing the image to the brand new ASA they are unable to write to the flash.
They have run fcsk disk0: to no avail. show file system show 0 and 0 for Flash size and Free space on disk0.
Is there anything that can be done, short of formating flash and trying to reinstall the image? I have asked them to reload the ASA but they are reluctant to do so as they don't want the site to lose connectivity.
View 6 Replies
ADVERTISEMENT
Jun 5, 2013
In order to do a flash upgrade on a 5510, is there any way to get the files from the existing flash onto the new flash before you replace existing flash? Is there an online procedure?
View 2 Replies
View Related
Feb 1, 2012
I deleted the flash from an ASA5510. I was able to tftp a version back into the device, but cannot seem to correctly have the box boot from this flash. I get the following error:
!WARNING: BOOT variable added, but not a valid image disk0: /asa831-k8.bin
*** Output from config line 41,"boot system disk0:/asa83..."
I have tried every save syntax i can think of to save this flash, but have yet to have it boot with an image ( I keep booting into ROMMON and have to tftp the image back in)
View 5 Replies
View Related
Jun 22, 2011
I need to upgrade the compact flash of my ASA 5510 from 256MB to 512MB. A friend's recommendation was to buy a card reader, copy all of the data from the existing card and paste it to the new compact flash. I have a hard time believing that it's that straight forward.
Any safer, more foolproof way of migrating between flash cards?
View 8 Replies
View Related
Oct 29, 2012
I was handed a firewall ASA 5520 but without external flash, I want to confirm that the ASA at least boot from rommon mode boot must have the external flash connected? I connected to power and I connect it by the console port it did not show any boot.Additionally I can confirm it is possible that you can connect a flash of a previous ASA model, say a 5510?
View 4 Replies
View Related
Sep 13, 2011
Is there a way to load a spare compact flash with a running-config, ASA IOS, & ASDM software via card reader? I need to load another flash card with all of the settings necessary for normal operation. This "spare" card will replace the flash that is currently in use. The reason for the replacement is capacity and because of changes made to the running-config. The "in-use" card is 256MB, the "spare" one is 512MB. Also, the new card will have a few changes made to the running-config, so it will, in essence, be a reload.
I have a card reader for the compact flash cards. If there is a way to load up this new card using the card reader, without monkeying with the firewall, I would prefer that. Like I said in the previous paragraph, this new flash card will replace the other one, once it's ready.
Hardware: ASA 5510
CF: 256MB (wanting to upgrade to the new 512MB card)
ASA IOS: 8.4
View 15 Replies
View Related
Sep 21, 2011
Did not write down the KEY for my wireless router...a CISCO/LINKSYS E1200. My old router had an HTTP address I could type in and access the router and read the security setings.....what http do I type in to read key on this wireless router?
View 11 Replies
View Related
Feb 26, 2013
I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
View 9 Replies
View Related
Jul 22, 2012
I bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
View 1 Replies
View Related
Jul 29, 2012
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br Interface IP-Address OK? Method Status Protocol Ethernet0/0 x.x.x.x YES CONFIG up up Ethernet0/1 x.x.x.x YES CONFIG up up Ethernet0/2 unassigned YES unset administratively down down Internal-Control0/0 127.0.1.1 YES unset up up Internal-Data0/0 unassigned YES unset up up Management0/0 192.168.1.1 YES CONFIG up up
View 8 Replies
View Related
Aug 5, 2011
I want to see log for write on ASA5520. who & when write lastly and who write before. How to see this log. In show vershon i see last modified date, but not log.
View 5 Replies
View Related
Dec 13, 2011
I follow the steps according to the basic settings provided by Cisco Support forum, but still failed to access the internet,
ASA5510# sh run: Saved:ASA Version 8.2(1)!hostname ASA5510domain-name xxx.comenable password passwd names!interface Ethernet0/0 nameif outside security-level 0 ip address x.x.x.x 255.255.255.248 ospf cost 10!interface Ethernet0/1 nameif inside security-level 100 ip address 10.161.9.14 255.255.255.0 ospf cost 10!interface Ethernet0/2 no nameif no security-level no ip address!interface Ethernet0/3 no nameif no security-level no ip address!interface(code)
View 9 Replies
View Related
Jun 28, 2011
When I make changes to the config of my ASA 5505 and write mem (or use the ASDM to save running config to flash) the changes are not being saved.
Is this going to be a problem with the Flash Memory on the device?I have successfully saved config on this device in the past, which is why I am thinking it might be a problem with the flash memory.
View 1 Replies
View Related
Aug 23, 2011
I have not worked with ASDM in a while. I have a 5510, with asdm-645.bin in the flash. The device runs version 8.4(2). I can download ASDM from the http interface of the firewall from the management interface. But I can not log in. I have used blank username and password, no username and enable password, blank username with enable password and a few other permutations. I then tried to connect to the asdm interface from inside also. But I can not connect. Needless to say, I have enabled http, and updated the http access-list. The only logging I have enabled is buffered. Is there any configuration that I am missing? Shall I cut and past the config?
View 4 Replies
View Related
Nov 12, 2012
when I try to run debugs on a pair of our firewalls. Error Message: ERROR: No memory for debug trace buffer. Debugs not available..Cisco ASA 5510 8.2(5)
View 1 Replies
View Related
Jun 15, 2011
I have an ASA 5510 and I can not configure fine.
My problem is that I have 10 public address connected to ASA and each public address is redirectioned to an internal IP address.
An of these public address is the ip address of mi ASA.
how to configure and access-list and an NAT, the others I will configure.
interface Ethernet0/0
description Interface_WAN_World-Ttrends
speed 100
duplex full
nameif outside(code)
View 59 Replies
View Related
Jul 6, 2011
When i tried to login through ASDM at Cisco ASA 5510, it ask for the username and password and after that nothing comes up. I am able to login through ssh. [code]
As per my knowledge show bootvar and show version, should shows the same IOS version. But here it's showing different. Is asdm-523 is compatible with IOS asa708.
View 6 Replies
View Related
Feb 19, 2012
I got a situation here for Nat-ed IPs i configured. I expected to open some ports on the interface to allow certain traffics to pass through, yet there are some of them are failed. Down is my current config.
object-group service DM_INLINE_SERVICE_1
service-object icmp
service-object tcp destination eq https
[Code]....
The only ports opened are 443, www, 3389 while ports domain, 5061,3478,3389. how to open domain, 5061, 3478, and 3389 ports on my ASA .
View 6 Replies
View Related
Jun 16, 2011
i have an issue with ASA 5510.
I connect to the device - https:/interface
I see the options such as download launcher etc.
But.. whenever I click on this I get stuck
Internet Explorer gives "page not found"
Or at the foot of the page it says "unable to download statup_lr"
Firefox says cannot connect
It is running 6.2.5.53
I can connect if I go to a PC where I have already downloaded the ASDM launcher (from many years ago)
Tried Win 2003, 2008 and Vista, and Windows 7
Tried downgrading to Java 6 r 7. Can I download the launcher from the Cisco website rather than the device? If so where?
View 2 Replies
View Related
Mar 31, 2011
We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?
View 1 Replies
View Related
Jul 15, 2011
This problem applies (in my case) to our ASA5510. The issue here is that the http service on the ASA is runnnig off of the standard port 80. Login to the firewall and run the following.no http server enable http server enable 8080,Now you should be able to add a NAT/PAT on port 443 to another server of your liking. Just remember when you attempt to use ASDM to manage the ASA in the future to specify the new port 8080.
View 1 Replies
View Related
Apr 20, 2011
I have an ASA 5510 working in Routed mode for a company with the following networks. everything works fine as desired. Below are the interfaces, security and ip addresses .
Ethernet0/0 DC_SERVER security-level 100
ip address 172.16.11.12 255.255.255.0
Ethernet0/1 Branches security-level 50
[Code]....
View 1 Replies
View Related
Oct 9, 2011
below is my sanitized ASA 5510 config. got an IPv6 T1 from at&t and im unable to pass any traffic from my LAN clients out.
:
ASA Version 8.2(2)
!
enable password PoBmYYxuAzCciKRA encrypted
[Code].....
View 6 Replies
View Related
Apr 22, 2012
I am tasked with transferring all clients from one subnet to the other. I figure the nicest way to do this is to temporarily have the subnets talk to each other in an endeavour to avoid as much downtime as possible. The two internal subnets are:
192.168.0.0/24
192.168.43.0/24 (the intended migration network)
I am beating my head against the desk here as I dont seem to be getting anywhere after the changes I have made. The current configuration is as such:
ASA Version 8.2(5)
!
hostname ciscoasa
domain-name *****
enable password ***** encrypted
passwd ***** encrypted
names
[code]......
Upgrading the firmware is not really an option?
View 3 Replies
View Related
Nov 27, 2012
One of my client has BSNL leased line with LAN IP POOL we configured those on ASA 5510 nad Internet working fine but from cloud we are not getting any response for ping requiest please find running configuration below:
ciscoasa(config)# sh run
: Saved
:
ASA Version 8.2(1)
[Code]....
View 4 Replies
View Related
Nov 13, 2011
Unable to create VLAN interfaces in ASA 5510
View 1 Replies
View Related
May 19, 2011
I have recently deployed a Cisco ASA 5510 Security plus firewall on my companies network, but there is a problem that I am finding hard to get by and I think it is ASA related.
From (inside we are not able to hit any of our sites that are on the (outside). I have nat policies in place to translate the public to private, but I think I that I need some thing more. This seems to be occuring mainly with our external web sites as well as another animoly with regards to FTP (but it may be fixed if the http issue is resolved.)
I was hoping some with a lot more knowledge on ASA firewalls than my self can spot the error in my run-cfgs.
[code]....
View 15 Replies
View Related
Mar 26, 2013
I am in the process of switching firewalls. Currently I have a Sonic Firewall inplace. I have been tasked to switch the firewall out with a cisco asa firewall 5510. The sonic firewall currently allows email traffic, web traffic, and dns traffic. When I use the current config below on the asa I am unable to receive email from the outside network. I can send and browse websites but I cannot receive email.
ASA Version 9.1(1)
! hostname ciscoasa
enable password kdkfdjdjflkadjdsfj
[Code]......
View 3 Replies
View Related
May 23, 2013
i never see this before, but on newly purchased just configured firewall.when i do wrtie standby.All interfaces on standby unit flaps.is it some IOS bug? my firewalls are [code] what could be the reason? FYI i am using LAN base failover and not doing any statful fail-over.
View 3 Replies
View Related
Jul 3, 2011
I have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it.
I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.
View 5 Replies
View Related
Mar 8, 2011
I have setup two different subnet 192.168.1.0 and 192.168.2.0 on the same 'inside' interface. They are unable talking to each other. I can ping from firewall to both subnet. Both side unable talking to each other unless I add route on the both side systems.I have added the followings in ASA5510. [code]
View 8 Replies
View Related
Jan 17, 2013
i am unable to launch ASDM, and access https:// to run Asdm..everything worked find yesterday but now for some reason it wont work?When i am trying to log in with the asdm it just hangs on the connecting to device... please wait...When i am tryng access the https://... i get the ssl do you want to trust.. and i press proceed anyway and i get an error
Asa 5510
Device manager version 6.1
System image file is "disk0:/asa804-k8.bin
Also i am accessing the asa with ssh without any issues
View 10 Replies
View Related
Nov 11, 2008
I have allways configured and run LDAP Server Groups authenticating to Active Directory Domain Controllers using LDAP, never an issue, until I hit a Domain Controller running on a Windows Server 2008. I have been unable to authenticate with the common setting with an ASA5510 running 8.0.1.
View 4 Replies
View Related
