Cisco Firewall :: ASA 5510 Unable To Run Debugs
Nov 12, 2012when I try to run debugs on a pair of our firewalls. Error Message: ERROR: No memory for debug trace buffer. Debugs not available..Cisco ASA 5510 8.2(5)
View 1 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5510 - Users Unable To Access Internet Through Firewall
Feb 26, 2013I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
Cisco Firewall :: Unable To See Interface On ASA 5510 Firewall?
Jul 29, 2012I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br Interface IP-Address OK? Method Status Protocol Ethernet0/0 x.x.x.x YES CONFIG up up Ethernet0/1 x.x.x.x YES CONFIG up up Ethernet0/2 unassigned YES unset administratively down down Internal-Control0/0 127.0.1.1 YES unset up up Internal-Data0/0 unassigned YES unset up up Management0/0 192.168.1.1 YES CONFIG up up
Cisco Firewall :: Unable To Run ASA 5510
Dec 13, 2011I follow the steps according to the basic settings provided by Cisco Support forum, but still failed to access the internet,
ASA5510# sh run: Saved:ASA Version 8.2(1)!hostname ASA5510domain-name xxx.comenable password passwd names!interface Ethernet0/0 nameif outside security-level 0 ip address x.x.x.x 255.255.255.248 ospf cost 10!interface Ethernet0/1 nameif inside security-level 100 ip address 10.161.9.14 255.255.255.0 ospf cost 10!interface Ethernet0/2 no nameif no security-level no ip address!interface Ethernet0/3 no nameif no security-level no ip address!interface(code)
Cisco Firewall :: 5510 - Unable To Login
Aug 23, 2011I have not worked with ASDM in a while. I have a 5510, with asdm-645.bin in the flash. The device runs version 8.4(2). I can download ASDM from the http interface of the firewall from the management interface. But I can not log in. I have used blank username and password, no username and enable password, blank username with enable password and a few other permutations. I then tried to connect to the asdm interface from inside also. But I can not connect. Needless to say, I have enabled http, and updated the http access-list. The only logging I have enabled is buffered. Is there any configuration that I am missing? Shall I cut and past the config?
View 4 Replies View RelatedCisco Firewall :: Unable To Configure NAT ASA 5510
Jun 15, 2011I have an ASA 5510 and I can not configure fine.
My problem is that I have 10 public address connected to ASA and each public address is redirectioned to an internal IP address.
An of these public address is the ip address of mi ASA.
how to configure and access-list and an NAT, the others I will configure.
interface Ethernet0/0
description Interface_WAN_World-Ttrends
speed 100
duplex full
nameif outside(code)
Cisco Firewall :: ASA 5510 - Unable To Write To Flash
May 9, 2012My client has had to replace their ASA 5510. Upon importing the image to the brand new ASA they are unable to write to the flash.
They have run fcsk disk0: to no avail. show file system show 0 and 0 for Flash size and Free space on disk0.
Is there anything that can be done, short of formating flash and trying to reinstall the image? I have asked them to reload the ASA but they are reluctant to do so as they don't want the site to lose connectivity.
Cisco Firewall :: Unable To Login Through ASDM At ASA 5510
Jul 6, 2011When i tried to login through ASDM at Cisco ASA 5510, it ask for the username and password and after that nothing comes up. I am able to login through ssh. [code]
As per my knowledge show bootvar and show version, should shows the same IOS version. But here it's showing different. Is asdm-523 is compatible with IOS asa708.
Cisco Firewall :: ASA 5510 8.3 - Unable To Open Ports?
Feb 19, 2012I got a situation here for Nat-ed IPs i configured. I expected to open some ports on the interface to allow certain traffics to pass through, yet there are some of them are failed. Down is my current config.
object-group service DM_INLINE_SERVICE_1
service-object icmp
service-object tcp destination eq https
[Code]....
The only ports opened are 443, www, 3389 while ports domain, 5061,3478,3389. how to open domain, 5061, 3478, and 3389 ports on my ASA .
Cisco Firewall :: Unable To Download ASDM Launcher From ASA 5510
Jun 16, 2011i have an issue with ASA 5510.
I connect to the device - https:/interface
I see the options such as download launcher etc.
But.. whenever I click on this I get stuck
Internet Explorer gives "page not found"
Or at the foot of the page it says "unable to download statup_lr"
Firefox says cannot connect
It is running 6.2.5.53
I can connect if I go to a PC where I have already downloaded the ASDM launcher (from many years ago)
Tried Win 2003, 2008 and Vista, and Windows 7
Tried downgrading to Java 6 r 7. Can I download the launcher from the Cisco website rather than the device? If so where?
Cisco Firewall :: Unable To Ping Default Gateway On ASA 5510
Mar 31, 2011We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?
View 1 Replies View RelatedCisco Firewall :: Unable To Reserve Port 443 For Static PAT In Asa 5510
Jul 15, 2011This problem applies (in my case) to our ASA5510. The issue here is that the http service on the ASA is runnnig off of the standard port 80. Login to the firewall and run the following.no http server enable http server enable 8080,Now you should be able to add a NAT/PAT on port 443 to another server of your liking. Just remember when you attempt to use ASDM to manage the ASA in the future to specify the new port 8080.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 - Unable To Communicate Between Interface Networks
Apr 20, 2011I have an ASA 5510 working in Routed mode for a company with the following networks. everything works fine as desired. Below are the interfaces, security and ip addresses .
Ethernet0/0 DC_SERVER security-level 100
ip address 172.16.11.12 255.255.255.0
Ethernet0/1 Branches security-level 50
[Code]....
Cisco Firewall :: Unable To Send IPv6 Traffic Through ASA 5510?
Oct 9, 2011below is my sanitized ASA 5510 config. got an IPv6 T1 from at&t and im unable to pass any traffic from my LAN clients out.
:
ASA Version 8.2(2)
!
enable password PoBmYYxuAzCciKRA encrypted
[Code].....
Cisco Firewall :: ASA 5510 / Unable To Get Internal Networks Talking To Each Other
Apr 22, 2012I am tasked with transferring all clients from one subnet to the other. I figure the nicest way to do this is to temporarily have the subnets talk to each other in an endeavour to avoid as much downtime as possible. The two internal subnets are:
192.168.0.0/24
192.168.43.0/24 (the intended migration network)
I am beating my head against the desk here as I dont seem to be getting anywhere after the changes I have made. The current configuration is as such:
ASA Version 8.2(5)
!
hostname ciscoasa
domain-name *****
enable password ***** encrypted
passwd ***** encrypted
names
[code]......
Upgrading the firmware is not really an option?
Cisco Firewall :: ASA 5510 Unable To Ping From Outside Interface Or Cloud
Nov 27, 2012One of my client has BSNL leased line with LAN IP POOL we configured those on ASA 5510 nad Internet working fine but from cloud we are not getting any response for ping requiest please find running configuration below:
ciscoasa(config)# sh run
: Saved
:
ASA Version 8.2(1)
[Code]....
Cisco Firewall :: Unable To Create VLAN Interfaces In ASA 5510
Nov 13, 2011Unable to create VLAN interfaces in ASA 5510
View 1 Replies View RelatedCisco Firewall :: Unable To Access Inside Resources From Outside On ASA 5510
May 19, 2011I have recently deployed a Cisco ASA 5510 Security plus firewall on my companies network, but there is a problem that I am finding hard to get by and I think it is ASA related.
From (inside we are not able to hit any of our sites that are on the (outside). I have nat policies in place to translate the public to private, but I think I that I need some thing more. This seems to be occuring mainly with our external web sites as well as another animoly with regards to FTP (but it may be fixed if the http issue is resolved.)
I was hoping some with a lot more knowledge on ASA firewalls than my self can spot the error in my run-cfgs.
[code]....
Cisco Firewall :: ASA 5510 - Unable To Receive Email From Outside Network
Mar 26, 2013I am in the process of switching firewalls. Currently I have a Sonic Firewall inplace. I have been tasked to switch the firewall out with a cisco asa firewall 5510. The sonic firewall currently allows email traffic, web traffic, and dns traffic. When I use the current config below on the asa I am unable to receive email from the outside network. I can send and browse websites but I cannot receive email.
ASA Version 9.1(1)
! hostname ciscoasa
enable password kdkfdjdjflkadjdsfj
[Code]......
Cisco Firewall :: 5510 Two Subnet Unable To Talk To Each Other On Same Inside Interface
Mar 8, 2011I have setup two different subnet 192.168.1.0 and 192.168.2.0 on the same 'inside' interface. They are unable talking to each other. I can ping from firewall to both subnet. Both side unable talking to each other unless I add route on the both side systems.I have added the followings in ASA5510. [code]
View 8 Replies View RelatedCisco Firewall :: Asa 5510 / Unable To Launch And Access HTTPS To Run ASDM
Jan 17, 2013i am unable to launch ASDM, and access https:// to run Asdm..everything worked find yesterday but now for some reason it wont work?When i am trying to log in with the asdm it just hangs on the connecting to device... please wait...When i am tryng access the https://... i get the ssl do you want to trust.. and i press proceed anyway and i get an error
Asa 5510
Device manager version 6.1
System image file is "disk0:/asa804-k8.bin
Also i am accessing the asa with ssh without any issues
Cisco Firewall :: Unable To Authenticate With Common Setting With ASA 5510 Running 8.0
Nov 11, 2008I have allways configured and run LDAP Server Groups authenticating to Active Directory Domain Controllers using LDAP, never an issue, until I hit a Domain Controller running on a Windows Server 2008. I have been unable to authenticate with the common setting with an ASA5510 running 8.0.1.
View 4 Replies View RelatedCisco Firewall :: ASA 5510 Users Are Unable To Pass Traffic When Connected Through Vpn
Sep 12, 2011I am migrating over from and old PIX to an ASA 5510. After configuring the new device everything else is functional (Internet) but users are unable to pass traffic when connected through the vpn, they are able to authenticate and I see their session connected on the ASDM but no data is passed..[code]
View 4 Replies View RelatedCisco Firewall :: ASA 5510 Displays Error - Unable To Make Any Configuration Changes
Feb 4, 2012I have turned on the aaa command authorization without applying adequate privileges to the user. I can now log in through that user but the ASA 5510 displays an error :ASA 5510# show running-config
ERROR: % Invalid input detected at '^' marker.
ERROR: Command authorization failed.
I am unable to make any configuration changes on the firewall. Is there any default user through which I can log in and disable the aaa authorization ? if not, how can I resolve this situation ?
Cisco Firewall :: Unable To Access Remote Network After Connecting ASA 5510 And 5505
Sep 24, 2011I am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies View RelatedCisco VPN :: Unable To SIP Through ASA 5510 Client>
Feb 24, 2012I have configured VPN client on my ASA 5510,
I am trying now to telnet my call manager on port 5060 and on port 2000.
When i am connected localy i am able to telnet both ports, but when i am trying to connect through cisco VPN client i am able to telnet the port 2000 and not able to telnet 5060. Both ports are on the same call manager.
When using windows VPN i am able to telnet both ports.
if i removed inspect SIP from: policy-map global_policy class inspection_default
Cisco WAN :: Unable To Access Internet Through Asa 5510
Jan 28, 2012My network includes *8 port unmanageble switch and a ASA 5510 firewall. There are two internet lease line from two different ISP which are end on switch. Through switch it goes to firewall. This network was working fine. Now we hired a new Internet connection from another ISP. When i tried to connect this 3rd line to my switch , all network goes down.
View 1 Replies View RelatedCisco Security :: ASA 5510 - Unable To Connect SSH?
Mar 12, 2013I configured Cisco ASA5510 firewall, but i am facing the problem with ssh login, i gave ssh for inside and outside access, but i am getting "server ... error" i enabled LOCAL for the authentication for ssh and HTTP. and i am able to acees the device through HTTP using ASDM, but not able to access from outside.
ASA Version 8.2(1)
!
hostname ASA5510
[Code].....
Unable To Recover Travelmate 5510?
Mar 4, 2011I'm unable to use system recovery back to the default settings as the computer shuts down sometimes 2mins left and sometimes 6mins left?
View 1 Replies View RelatedCisco Firewall :: ASA 5510 / Multiple VLANs Behind Single Firewall Segment?
Feb 5, 2012I need to create a firewalled segment that not only separates hosts from general population, but also from each other. The solitary confinement of firewalled segments.I know that I could create a bunch of sub-interfaces, one for each host or group that needs to be isolated, but I'd really rather not have to do that if possible. 1) It could become a management nightmare between ACLs and sub-interfaces and 2) it's a waste of IP addresses.s there any way that I can create a bunch of separate VLANs behind the firewall and have them all terminate at the firewall, using a single firewall IP address for the gateway?
VLAN 1 - hosts 1.1.1.5 and 1.1.1.6VLAN 2 - hosts 1.1.1.7
Firewall DMZ Interface - 1.1.1.1VLAN 3 - hosts 1.1.1.8 and 1.1.1.9
This way, the hosts are isolated and can't talk to each other unless they're on the same VLAN.I'm working with an ASA 5510 running 8.2.4(4).
Cisco Firewall :: ASA 5510 / Enabling Firewall To Send Logging Information?
Jun 22, 2011I have a ASA 5510 firewall with CSC module and Security Plus license for CSC module.Will you tell me how to configure my firewall to send emails to particular mail ID when someone login into the firewall or any virus attacks from outside.
View 6 Replies View RelatedCisco Firewall :: IOS Firewall Versus ASA (5505 / 5510) For Smaller Clients (less Than 50)?
Apr 24, 2012We were having a discussion of ios firewall vs. asa for smaller clients(less than 50). On using ios firewall(zbf or cbac)and an asa 5505/5510. One of the arguments brought up on using ios firewall on the router is that a router will do an ip sla failover. I have configured a number of isr's for this and i know it works good.
View 1 Replies View RelatedCisco VPN :: 5510 Unable To Resolve Server Address
Mar 27, 2011I am using the Cisco VPN Client 5.0.06.0160 - and am having an issue connecting to my ASA 5510 via VPN. This issue is happening on 1 of our laptops. All other laptops connect just fine. So the problem is not in the ASA. I have double checked the client setup and config and it too is correct. The interesting thing is, we are connecting to an IP Address and not a host name.
View 1 Replies View Related