Computer Allowed To Read Ethernet Cords?
Jul 31, 2012
I was using the household Ethernet cord this morning and it was working normally. Then I stopped using the Internet to do a program tidy up. - there were a few program's that had been extras to other program's I don't need. Then I went to use the Internet again and it wouldn't connect through the Ethernet cord. I was able to establish that my computer is still able to access the Internet through wireless (which we don't often use on account of it been spotty). Could I have done/deleted/turned off something that allows my computer to read Ethernet cords?
View 2 Replies
ADVERTISEMENT
Mar 29, 2011
me know if i can do this connect 2 ethernet cords with a coupler
View 1 Replies
View Related
Mar 19, 2013
I'm switching from using a wireless usb adapter to a wired connection via ethernet cable.
When I plug the ethernet cable in however nothing happens, I've tried using it with a different computer and it works like a charm but this one doesn't seem to be working right.
HP Pro Small Form Factor 3010 Windows 7 32bit (Other computer was using windows vista)
Windows IP Configuration
Host Name . . . . . . . . . . . . : HPPro3010
Primary Dns Suffix . . . . . . . :
[Code]....
View 1 Replies
View Related
May 22, 2012
I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies
View Related
Jul 12, 2011
I just bout a Linksys WRT120N today as my venerable WRT54G finely died over the weekend. I'm liking the new one, but the cord is too short. I can't move the router from its old spot, so I need a longer power cord.Does Linksys/Cisco sell longer power cords (for a decent price) or would I be better off buying cheap extension cable for it?
View 2 Replies
View Related
Jan 23, 2012
we recived the following switches.
WS-C4507R-ECat4500 E-Series 7-Slot Chassis, fan, no ps, Red Sup CapableWS-C2960S-24TS-SCatalyst 2960S 24 GigE, 2 x SFP LAN LiteWS-C3750X-24T-SCatalyst 3750X 24 Port Data IP BaseGLC-LH-SMGE SFP, LC connector LX/LH transceiver
The current situation that all existing Fiber Patch Cords cables & fiber cables coming from field are multimode. So, I think we have a compatibility issues. We need clarifications from your, what are the options that we can do to resolve this issue.Can we connect the above switches to multimode Fiber Patch Cords cables?
View 4 Replies
View Related
Jul 30, 2011
I just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:
Windows IP Configuration
Host Name: bouss
Primary Dns Suffix:
Node Type: Broadcast
[Code]....
View 5 Replies
View Related
Jul 29, 2012
We have 2 internet providers and I would like to find some way to switch our 5 computers between the 2 internets without having to unplug the ethernet cables everytime someone wants to switch. Is there some type of switch we can buy for each computer to do this or is there no such thing?
View 8 Replies
View Related
Jan 24, 2012
I have a piece of hardware (audio device) with Ethernet network access only. I'd like to give it to my users and have them connect via Wifi. But configuring a Wifi bridge for each use is too onerous. I'm looking for a wireless bridge device with a display and keypad that allows the user to scan, select and associate with a wifi router, then bridge the wireless network to ethernet so I can attach my device. Does such an animal exist? Price is not a major factor.
View 5 Replies
View Related
Jul 2, 2011
My custom built desktop is not recognizing an ethernet cord. The lights are not coming on when I plug it in. The device manager does not show network adapters. Im not sure where to find it/ not sure its there.
View 6 Replies
View Related
Dec 6, 2011
We have been working with this for a while. Our computer is a HP desktop Windows Vista 64 bit. It is wired to the router. We have a cable modem and a Linksys Wired/Wireless Router (Wrt54G). We also have other computers and video game systems that we connect off and on either wired or wireless. Every so often our internet will just cut out (much too frequently). All the lights are still on on the modem. On the computer(s) the little globe disappears and we are left with just the two computers sign in the tray. The modem still shows internet coming in though. We usually unplug the modem and router, wait and then plug it back in. We have tried unplugging everything before too and we still have this problem. I have checked Device Manager and unchecked the "turn off to save power" boxes. I also just today disabled Wake-On-Lan. (I saw that on another forum. Was that correct?) I went into our router and everything seems normal but I don't know how to use all of it. Earlier this summer I had to redo the entire computer bc the hard drive failed. I had to replace it and format the computer.
I noticed the other day that the computer was trying to connect through ethernet and wirelessly. I turned off the wireless and checked for it to be manualThis is getting old. It happens fairly often. Our ISP said that our modem was fine. They said it was probably the router but they always say that. We are supposed to have maybe 3 meg cable internet. I have done speed checks before and it is about half that. We live several miles from the station. Our internet also goes out in storms or wind but that goes out on the modem. This keeps happening and the modem acts like it is still connected.I need any suggestions on settings or anything I can try. This is really tiresome and I don't know where to look.
View 8 Replies
View Related
Dec 16, 2012
I am trying to connect my PC to my router and I am having problems. Whenever I connect via ethernet, I get "no internet access" but if I use the same port and connect to my Xbox, it goes through fine.
View 1 Replies
View Related
Aug 26, 2012
When I plug my ethernet cord into my Dell XPS laptop, Windows doesn't detect that I have a connection. I've tried another cord and it works (it's too short to use instead) and my roommate has tried my cord and it works fine on his computer.I've tried diagnosing the problem, disabling and enabling the Local Area Connection, but nothing seems to work.
View 9 Replies
View Related
Sep 5, 2012
I've got a wireless adapter for my desktop and thats what i've been using for years to connect, but now i'm am trying to get a more reliable connection by having the ethernet cable plugged in. Problem is, as soon as I plug it in the whole computer gets extreamly sluggish or sometimes freezes up completely. If I am very patient, I can very slowly do something things. If I open the browser, it probably takes a minute for it to load. Opening the control panel, the window pops-up but none of the icons will appear until it times out. And trying to use the network icons on the taskbar to get into network settings is impossible. Weird thing is as soon as I unplug it and turn the wifi back on, the PC starts responding super quick again within seconds.
View 9 Replies
View Related
Feb 21, 2013
I bought a "Nexxt Solutions 8 ports Ethernet Switch" and it only allows me to use the internet on the first computer that I plug into one of the Lan ports. I get a Limited Connection MessageI did some research and found something about a DHCP Server and automatic IP assignment, but I can't find a comprehensive tutorial on how to setup this.I'm sure the solution is simple.
View 2 Replies
View Related
Apr 25, 2011
I tried 3 cables, and even one of them was new. So im sure the problem isn't the cables. For some reason, whenever I connect a ehternet cable to my computer, I cannot seem to get internet connection through it. Some days ago I installed this Wireless Lan device from a CD, that came with a sort of antenne I had to put on my computer. It works great, BUT its slow. Thats why i would like to go on internet with cable again. I remember one day to another that my computer didn't detect the cables anymore, what could be the problem?
View 7 Replies
View Related
Jun 15, 2011
trying to connect this printer and it just cannot be done without USB.
Dell Inspiron 1440
Windows 7 64 bit
Cisco e2000 router with WPA-WPA-2 security
AVG paid antivirus
I have completely uninstalled the printer with level 3 uninstall. Downloaded the latest driver from HP website. Went through the wireless network connection wizard (a dozen times) and the printer says it is connected to the network with no problem. Ran the Network Configuration, lists an IP address, excellent connection, no problems. But on installing the driver, the computer absolutely cannot see the printer. Tried entering the IP address, creating a new port directly to the IP address. Nothing. Tried pinging from the computer--nothing. Cannot bring up the printer's IP address on the browser. Disabled the firewall and tried that--nothing. Tried going back and connecting with ethernet cable directly to the router instead. Still cannot see the printer. I had this working once, and then had a virus and had to reinstall Windows 7. There was a trick to getting this to work, and I cannot remember it. Of course, the printer is out of warrantee so HP will not assist, even by email. The only way I have been able to get it to install is with USB, which is pretty darned inconvenient.
View 2 Replies
View Related
Dec 13, 2011
I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.
I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.
View 7 Replies
View Related
Mar 26, 2012
computer keeps restarting whenever i connect my network cable.
View 1 Replies
View Related
Jun 13, 2011
My Ethernet cable connecting my computer to my router is not working. It was just working a few days ago and I have connected it to a different computer and it worked on that
View 1 Replies
View Related
Feb 10, 2011
My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.
I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.
View 6 Replies
View Related
Jan 6, 2013
So lately my computer's wireless network has started to get really bad, we have 100mbit, and it only gets about 0.3. This seems to be an issue with the range, or something, since if i move the computer right next to the router, it runs at about 50-60mbit. Now a few days ago i decided to get an ethernet cable to try and solve the issue, but my computer doesn't detect a LAN connection, only the wireless one ( atleast it doesnt show up among the other connections). Some weeks ago the wireless connection worked nicely, but now suddenly it doesnt anymore. Currently i'm typing this from an old mac computer, since my internet doesn't work at all on my pc.
View 11 Replies
View Related
Apr 12, 2012
Compaq Evo W4000 with XP professional.Comp works fine when no ethernet cable plugged in - after 10 secs of plugging it in - it freezes Have run malware bytes and combofix already - no change.Disabled everything in startup menu and non Microsoft services Works OK in SAFE MODE with networking though
View 17 Replies
View Related
Jul 30, 2011
i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro
View 1 Replies
View Related
Aug 3, 2012
Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]
View 18 Replies
View Related
Mar 20, 2012
How do i enable my desktop computer to recognize my wireless router using the Ethernet port
View 1 Replies
View Related
Mar 20, 2012
How do i enable my desktop computer to recognise my wireless router using the ethernet port
View 2 Replies
View Related
Feb 1, 2013
Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications), in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200. Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity. Things I have done to date: removed Linksys E-series software and reloaded, updated drivers, changed all wiring to router, and checked IP addresses and they are different.
View 2 Replies
View Related
Mar 7, 2012
My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".
View 5 Replies
View Related
Mar 27, 2012
i have issue with whenever i m trying to download any file it's get upto almost 95-98%,but after suddenly stop.this issue with firefox, chrome browser
View 1 Replies
View Related
Jul 15, 2012
am looking for free software to read pdf, etc.
View 4 Replies
View Related
Feb 13, 2013
I just moved into a university residence. Setting up a wireless connection is not allowed - instead we have one ethernet port on the wall. As a result, we can only have one computer connected to the internet at a time via this wired connection. The problem is, I live with my partner and we both need internet access for our separate computers. We both need to be online at the same time. What is the easiest and most simple way to accomplish this? I don't know much about hubs, routers, and switches. I imagine there should be some sort of basic splitting device I could plug into wall which would allow 2 computers to use the ethernet port.
View 1 Replies
View Related
Feb 23, 2012
VPN between datacentre & office ASA 5510 & HP routers site-to-site vpn, 192.168.1.0 и 172.16.0.0 networks If I ping internal routers' cisco address 192.168.1.1 from 172.16.0.0 network host (172.16.2.200) I get ping timeout At the same time I see the same messages in ASDM monitoring when successful ping reaches and comes back to 192.168.1.0 host (192.168.1.101 for example) Pings from 172.16.0.0 to 192.168.1.0 hosts are ok, only 192.168.1.1 is silent Looks like icmp echo reply is not allowed or smth like that, where to take a look?why monitoring looks ok instead of denied according to ACL...?
View 2 Replies
View Related
