I am trying to connect my PC to my router and I am having problems. Whenever I connect via ethernet, I get "no internet access" but if I use the same port and connect to my Xbox, it goes through fine.
View 1 RepliesI have my Xbox and Pc hooked up to a monitor. I want to be able to use both at the same time using only 1 ethernet cable. How do I go about doing this. Will a regular splitter allow me to use both at the same time?
View 2 Replies View RelatedXbox is connected via ethernet to DLink. Router does not assign IP address to Xbox but does to all other wireless devices and wired computer. Xbox can connect to xbox live via direct connection to modem so cables and adapter are all good. Can't assign either static or dynamic IP address to Xbox. Have reset router to original config. Am at a loss of what else I can do?Have 2.01 firmware and have reset modem as well.PS....It has occasionally been connected in the past but currently no connection possible through router.
View 5 Replies View RelatedI am in a College dorm and the only access to internet we have is by connecting an Ethernet cable to the connection in the wall and straight to the computer. That is how I have internet as we speak and it works fine. Problem is, that when I plug it in into the xbox it doesnt even connect to the network?
View 1 Replies View RelatedWe have been working with this for a while. Our computer is a HP desktop Windows Vista 64 bit. It is wired to the router. We have a cable modem and a Linksys Wired/Wireless Router (Wrt54G). We also have other computers and video game systems that we connect off and on either wired or wireless. Every so often our internet will just cut out (much too frequently). All the lights are still on on the modem. On the computer(s) the little globe disappears and we are left with just the two computers sign in the tray. The modem still shows internet coming in though. We usually unplug the modem and router, wait and then plug it back in. We have tried unplugging everything before too and we still have this problem. I have checked Device Manager and unchecked the "turn off to save power" boxes. I also just today disabled Wake-On-Lan. (I saw that on another forum. Was that correct?) I went into our router and everything seems normal but I don't know how to use all of it. Earlier this summer I had to redo the entire computer bc the hard drive failed. I had to replace it and format the computer.
I noticed the other day that the computer was trying to connect through ethernet and wirelessly. I turned off the wireless and checked for it to be manualThis is getting old. It happens fairly often. Our ISP said that our modem was fine. They said it was probably the router but they always say that. We are supposed to have maybe 3 meg cable internet. I have done speed checks before and it is about half that. We live several miles from the station. Our internet also goes out in storms or wind but that goes out on the modem. This keeps happening and the modem acts like it is still connected.I need any suggestions on settings or anything I can try. This is really tiresome and I don't know where to look.
i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro
View 1 Replies View RelatedMy xbox has got a full signal but wont connect to xbox live.
View 1 Replies View RelatedI am going to use my ethernet cable to connect my pc to my xbox to use the PC as a bridge for the connection. My one question is, when I go to the adapter settings and go to the sharing tab on the properties of my wireless, what does the check box named 'Allow other users to connect through this computer's internet connection' do?
View 4 Replies View RelatedHow do i activate my xbox 360 console to my HP computer (windows7) so i can listen to music if u can resawn
View 2 Replies View RelatedI have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies View RelatedI'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option.
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSamsung>ipconfig/all
[Code].....
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
I just bought a new television so thought I would finally be able to get to play xbox live in a television away from the router! But of course like always there is is problems....
I'll start off by saying I understand about bridging your pc's wireless connection to the router and the wired connection from the xbox to the pc. I did the same thing last year with my old laptop and it worked fine.
However the problem lies in that my computer isn't recognising the xbox as a network device atal! They are connected using an ethernet cable (and the orange light comes on at port when xbox is turned on) but the only thing showing up in networked connections folder on the pc is the actual internet!
I had read that sometimes an ordinary ethernet cable isn't enough and it must be a cross over cable used to connect the pc and the xbox, so went into the shop today and purchased an adaptor that changes the cable to a cross over... but still nothing is showing up.
My computer is fairly top of the range, windows 7 and uses a netgear usb network card.
My xbox cannot connect to the internet. I'm hardwiring it. It can achieve an IP Adress and a Subnet Mask but... it's Gateway, Primary DNS, and Secondary DNS remains at 0.0.0.0
How can I fix this so that I can connect to Xbox Live?
What should I do cause my xbox360 the black one will Nt connect to the internet
View 1 Replies View RelatedI recently got a new modem. The network I'm on is Cox, and everything is running fine except for one thing: My Xbox 360. I've had no internet problems connecting my iPhone, my laptop, or my mom's Kindle Fire, but it simply won't connect with my Xbox 360.
View 1 Replies View RelatedI was a beta tester for MS Flight, I can sign-in on Games for windows live manually from my computer, but when I load up flight it says Connect to Live.When I press connect it says my game has been altered try re-installing Flight. I dont want to do this because if I get an error re-installing I wont be able to use flight. This problem happened when the beta testing finishe,has microsoft pulled the plug until the release date 29th?
View 1 Replies View RelatedI have dial up internet and I use that internet to get on xbox live yes I know it sucks but its all that is available in my area.I have connected my laptop to my xbox via an Ethernet cord CAT-6 I believe,I used to be able to get on xbox live this way then one day I tried to get on and and it would not connect to my PC it said It could not fine my IP I went on [URL] and did the troubleshooting thing and nothing worked?
View 6 Replies View Relatedi have Xbox 360. from my PC i can i access internet, but My xbox is not working.i checked the ip address and DNS every thing is fine, but i couldn't access internet.
View 2 Replies View Relatedneed some internet connections for the x box
View 1 Replies View Relatedi dont have a router but i have a modem but the x box wont connect directlyany answeres and dont put them in a geek code or whtever just gi me straight
View 2 Replies View Relatedmy xbox 360 can't connect to my network what do i do?
View 1 Replies View Relatedhow do i connect xbox 360 to the NETGEAR
View 1 Replies View Relatednew xbox 360 wont connect to my wifi, it scans for network, recognizes it and lets me enter password then fails test everytime, i even manually input the ip address and subnet mask, and gateway and still wont connect
View 3 Replies View RelatedIn our country we only used broadbands to connect to the internet, for short we don't have any wireless networking here. I just bought a new Xbox360 and I tried to connect the broadband on it. After connecting I tried to join Xbox Live and it said error. The console redirected me to a part which says test your connection, so I selected it. After selecting it I noticed that there are 4 parts. First the Xbox, second network, third internet, and lastly Xbox Live. I selected Test Connection and after doing so, it started to load. The first thing the console did is to test if the network is connected and after a few seconds the loading is done and it transfers to the other part which is the console will try to connect to the internet, in this part a huge x symbol appeared on the internet sign and it says that it is unable to connect to the internet and so I tried it again and same thing happened.
View 2 Replies View RelatedWasted several hours after changing to a D-link DIR 825 router attempting to connect to my XBOX 360 (S) without success.Tried to use the 5 GHz broadcasting with following settings (the 5 GHz SSID didn't show up in the XBOX wireless list but I'm one of those ignorant trial & error:
- locked on 802.11n and WPA2,
- disabled Multicast Streams in "Advanced/Advanced Network",
- disabled WI-FI protected setup in "Advanced/WI-FI Protected Setup" (maybe unnecessary)
- disabled SPI and TCP & UDP Endpoint Independent i "Advanced/Firewall Settings/Firewall Settings"
In the end it was resolved by the info in solution 5 on the xbox page: The XBOX:es with built in wireless can only use the 2.4 GHz connection, and to be able using 5 GHz broadcast I apparently have to get the "black adapter".
I just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:
Windows IP Configuration
Host Name: bouss
Primary Dns Suffix:
Node Type: Broadcast
[Code]....
We have 2 internet providers and I would like to find some way to switch our 5 computers between the 2 internets without having to unplug the ethernet cables everytime someone wants to switch. Is there some type of switch we can buy for each computer to do this or is there no such thing?
View 8 Replies View RelatedI have a piece of hardware (audio device) with Ethernet network access only. I'd like to give it to my users and have them connect via Wifi. But configuring a Wifi bridge for each use is too onerous. I'm looking for a wireless bridge device with a display and keypad that allows the user to scan, select and associate with a wifi router, then bridge the wireless network to ethernet so I can attach my device. Does such an animal exist? Price is not a major factor.
View 5 Replies View RelatedMy custom built desktop is not recognizing an ethernet cord. The lights are not coming on when I plug it in. The device manager does not show network adapters. Im not sure where to find it/ not sure its there.
View 6 Replies View RelatedI have a HTPC that I use to feed two XBOX extenders (all are hardwired, through a switch). I was using the onboard Realtek NIC, but having some stuttering issues for live and recorded TV feeds. I installed a new Intel NIC, but cannot get the Xboxs to connect back using that connection. Everything else is working (Internet, NAS drives, etc) with that card, only the Xbox extenders. I did delete the original connection and tried adding back as new, but have since had to revert back to the original NIC.
View 4 Replies View RelatedMy Xbox can't connect to my network yet my dad's and step bros ps3 connects fine, and all the laptops in the house too
View 1 Replies View Relatediv been using a wireless adapter ever since iv had the xbox. but now it wont connect to the internet anymore. the adapter goes green and links with the router, but it wont work.
View 1 Replies View Related