D-Link DIR-825 :: Can't Connect To XBOX With It
Aug 6, 2011
Wasted several hours after changing to a D-link DIR 825 router attempting to connect to my XBOX 360 (S) without success.Tried to use the 5 GHz broadcasting with following settings (the 5 GHz SSID didn't show up in the XBOX wireless list but I'm one of those ignorant trial & error:
- locked on 802.11n and WPA2,
- disabled Multicast Streams in "Advanced/Advanced Network",
- disabled WI-FI protected setup in "Advanced/WI-FI Protected Setup" (maybe unnecessary)
- disabled SPI and TCP & UDP Endpoint Independent i "Advanced/Firewall Settings/Firewall Settings"
In the end it was resolved by the info in solution 5 on the xbox page: The XBOX:es with built in wireless can only use the 2.4 GHz connection, and to be able using 5 GHz broadcast I apparently have to get the "black adapter".
View 3 Replies
ADVERTISEMENT
Apr 28, 2011
I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network. The issue isn't with connecting the xbox to xbox live, its with even getting it to connect to the wan.
[code]...
No matter what I do the xbox says it can't connect to the router, and in the router's wireless connections it shows my xbox's MAC address with an IP of 0.0.0.0.I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network.
View 3 Replies
View Related
Mar 26, 2011
Xbox is connected via ethernet to DLink. Router does not assign IP address to Xbox but does to all other wireless devices and wired computer. Xbox can connect to xbox live via direct connection to modem so cables and adapter are all good. Can't assign either static or dynamic IP address to Xbox. Have reset router to original config. Am at a loss of what else I can do?Have 2.01 firmware and have reset modem as well.PS....It has occasionally been connected in the past but currently no connection possible through router.
View 5 Replies
View Related
Feb 11, 2012
I've got an Open NAT but there's still some people i can't connect to (Xbox Live), i know theres a UPNP but it doesn't seem like it's doing anything.
View 1 Replies
View Related
Aug 8, 2011
How i can connect to my 5ghz wifi through my xbox ?
View 5 Replies
View Related
Nov 15, 2012
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
View 4 Replies
View Related
Aug 21, 2011
I'm attempting to connect an Xbox 360 console to a Linksys WRT54GL router (wirelessly), using a TP-Link TL-WA500G wireless access point. I've had this working in the past, but I didn't make a note of the configuration unfortunately. The Internet connection is connected to the router. The device hasn't been used for several months. During this time, I installed Tomato firmware onto the WRT54GL router, however I have since completely restored the router to factory defaults, by reinstalling the default firmware and performing a hard reset. Having reset the device, I was surprised to see that the Tomato favicon is still displayed when accessing the router's admin webapp.
View 1 Replies
View Related
Jan 29, 2011
I just upgraded my wireless router to a D-Link DIR-655. I have 2 PCs and a network storage device (D-Link DNS 321) connected via ethernet to the router. I also have an xBox 360 connected wirelessly to the router. The xBox is able to connect to the internet via the router, but it cannot connect to (see) the PC's or the network storage device. It was able to do so with my old wireless router (a Belkin), but it stopped with the DIR-655.
View 4 Replies
View Related
Jul 21, 2011
So our last router (Linksys) quit on us the other day so we got this one. We plug it in and it works most of the time, but the connection drops out periodically. Also, for some reason, I am now unable to connect to Xbox Live using my laptop as a router (plugging the ethernet cable from my xbox to my laptop). Also, when I plag it in, the internet stops working on my laptop and I have to restart it to get it to work again.
View 1 Replies
View Related
Mar 10, 2011
My xbox has got a full signal but wont connect to xbox live.
View 1 Replies
View Related
Jan 8, 2011
I just upgraded yesterday to the DIR-655 (ver B1, F/W Ver 2.00NA), and suddenly my sons Xbox 360 complains that the NAT is set to moderate. I'm not really sure what this means, but I've never seen it before and it wasn't an issue with my old router. It pertains to the DIR-655? I did some quick google searches and I've seen lots of different 'solutions' to this issue, but none of them seem to agree with each other and I'd rather not spend and entire afternoon trying one after another given that this router kills my internet connection for a full 20 seconds every single time I make any change.
View 4 Replies
View Related
Jun 22, 2012
I own the DIR-655 version B1 (EU version) living in the UK.I play xbox, specifically in Halo Reach. My setup isn't straight forward as I have 2 xboxes in the house, one wired and one wireless and I need to keep the NAT ratings open on both. This limits me to certain settings, and doesn't allow QOS on the v2.00 firmware due to my need to have dynamic ip addresses.I have just flashed the router's firmware with new version (DIR655B1_FW205B06) as it appeared available for download in the router's firmware menu. The old version was FW2.00 as said.any other settings to enable or disable, for wired, or wireless, that will optimise for xbox gaming. Finally, I also have fw version DIR655B1_FW206B02, which was emailed to me by D-Link, if this is any better.
View 1 Replies
View Related
Jan 7, 2012
I've moved into a new apartment with a couple of people who already have wifi set up. They are adament about me not running a ethernet cable across the apartment to my room for my xbox 360. I have a DIR-601 from my last apartment, and I am wondering if there is a way to set up the router as an access point that allows me to connect to the existing wifi network and then wire my xbox 360 in.
View 4 Replies
View Related
Aug 3, 2011
No matter what I try, I cannot get the DIR-655 to connect to my Xbox 360 Wireless N Adapter with N, only connects with G. If I use N only mode, it won't connect at all, even if I manually input the settings. Setting the security to WPA2 Only and setting the Cipher Type to AES doesn't work.
Hardware Version : A3
Firmware Version : 1.35NA
802.11 Mode : Mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal
WPA Mode : Auto (WPA or WPA2)
Cipher Type : TKOP and AES
View 14 Replies
View Related
Oct 4, 2011
My netgear router kept dropping my internet connection so after some research I bought the DIR-655 router. It installed fine. My computer connects to the internet great and so does my xbox. But now my xbox doesn't see my PC so I can not set up a media center connection. I know it isn't a firewall setting or a setting on my computer because it worked fine with my old netgear router and the router I had before that. I even double checked by turning off the firewall. I have version 2.0 firmware and the settings are out of the box. I assume there is something I need to set up to get this to work but I have not been able to find any answers on the internet. I don't know a lot about networking as I've always used out of the box settings and had success with everything working the way I like.
View 6 Replies
View Related
Aug 20, 2011
I've been using the Dir-655 for 2 or 3 years with my old Xbox 360 and an external G wireless adapter. Everything was working perfectly until I got the dreaded Red Rings Of Death the other day. I replaced the Xbox with a new Slim version with built in N capable network adapter.
After more than 10 hours of trying a variety of "fixes" I found from MS and in this forum, I am still at square 1.
Hardware Version : A3
Firmware Version : 1.32NA (this is listed as Live compatible by Microsoft)
802.11 Mode : Tried N only, G only and mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal Also tried WEP
WPA Mode : Auto (WPA or WPA2) Also tried WEP
Cipher Type : TKOP and AES
I tried assigning an IP manually from the Xbox. But, no matter what I do, the router will not accept it. It is especially frustrating that the Xbox is visible to the unit. It simply will not assign an IP to it under any circumstance.
If you read the sales hype promoting the Dir-655, you will see a lot of nonsense about it being great for gaming. Given that, you'd think a simple solution would have been found and posted for this issue by now. Surely, end users shouldn't be trying 100 different possible "fixes", none of which work, at this late stage of the firmware upgrades. If I sound a tad fed up, it's because I am. After the expense of the new Xbox, it appears I now have to junk my router too.
Here is the status screen taken when it was in mixed mode. Changing it to 'G Only' didn't make any difference:
View 12 Replies
View Related
Mar 9, 2011
Is this router good for gaming with the Xbox 360 & PS3.My linksys wrt120 n is giving me fits I need a better gaming router.
View 2 Replies
View Related
Jul 19, 2012
I have recently bought a wireless N 150 usb Dlink adapter, i have installed the software and have conected it to my router using WPS (I do not know the passphrase). The adapter is working excellent but when I added the adapter, my old SSID (Dlink) got switched to Dlinkelb7. Dlinkelb7 has full bars when the old Dlink only comes up so often with one bar. Since the switch of Dlink to Dlinkelb7 my xbox 360 adapter has a very hard time connecting to Dlink and it will not connect to Dlinkelb7 because it needs a passphrase. My router is also Dlink Model DIR-615.
View 6 Replies
View Related
Dec 19, 2012
I just upgraded my dir-835 to the latest 1.03 firmware and it still not working.Plugged an ntfs firmated drive with films on it into the router and windows media player can see and stream from the router but xbox 360 is not detecting the media server !I tried with a dir 857 and xbox works fine but with the dir 853 no go
View 14 Replies
View Related
May 11, 2011
I've been trying to play Final Fantasy XI on my XBox 360 through this router. I have the latest firmware available. According to FF's tech support I need to port forward TCP and UDP 50000 through 65535. I've done this numerous times on my own and twice through D-Link support and am still getting disconnected.The game plays fine when it's connected directly to the modem, but as I'm not the only person in the house this isn't really an option.
View 3 Replies
View Related
Feb 12, 2012
I'm having trouble seeing my PC from my XBox (I want to use WMC to stream video to XBox). Here's my setup:
ISP provided modem (No branding), connected to my PC Network out (Wired) from modem to Dlink DIR-665 router (which is broadcasting WIFI) Network out (Wired) from Dlink router to XBox
I'm online with the XBox with no issue, but I can't access the PC through Media Centre with this setup. When I connect the XBox to the modem directly, I also have no issues. I'm using Norton Internet Security 2012 if that could be the issue.
View 15 Replies
View Related
Aug 12, 2011
i have a little network knowledge but the tp-link wa-500g is proving quite a challenge to set up.i am trying to set it up in client mode to use with the xbox 360.thhe problem is i seem to set everything up correctly but it doesnt actually seem to work or to connect to the main router..which is a sky sagemfast router...(could this maybe be the problem? and if so how could i sort this? i have set a static ip on the tp.link and set up in client mode and "supposedly" connected to the main router in which is hard to figure out if it has or hasnt...also my sky router has wpa security and i am wondering if something has to be configured in my tp-link wa-500g to connect? but i can find no information on this needing to be done.
View 3 Replies
View Related
May 25, 2012
Had to uninstall pure networks software as wouldnt work with new HP printer software 8600 at all. took me 2 days to figure that out. anyways I am a newbie when comes to networking. I finally got everything to work but I cant get the xbox to connect. I tried within the software at the IP address but nothing happens, DWA 552, Software version A2, Firmwre ve 1.1 os/ win xp media 2005.sp 3 computer: made by me: Intel BX97520J (bad axe) cpu: Intel quad, 6600 2.4 ghz,
View 1 Replies
View Related
Dec 16, 2012
I have tried all firmware and go into router settings and it shows it's sending a wireless signal to Xbox. I have it connected via Cat5 cable.
View 5 Replies
View Related
Jun 22, 2011
Xbox works fine for some things, I can access Netflix, can download from live marketplace, etc, but cannot join a party and cannot play a game. Other people cannot join my party, cannot play my game. Error when I try to join a party is "Can't connect to xbox live party, there might be a network problem."
Xbox join party and games work fine when connected directly to comcast (motorola) modem.Dir-601, firware 1.02NA and 101NA. Hardware version A1.Port forwarding TCP 53,80,3074 and UDP 53,88,3074 - also included TCP 80 and 21 to no avail.
View 1 Replies
View Related
Jun 21, 2011
ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
View 14 Replies
View Related
Oct 26, 2011
I have a DIR-825 router series b, with firmware 2.05NA.My desktop is running vista 64Bit.I want to use my xbox 360 as a media center.I lose my connection between my xbox and my computer whenever the xbox is turned off. I can connect, and it works well, but only after I uninstall the extender from Media Center, then restart my computer. Then it sees the xbox on the network. I then have to set up a new connection. This is done over wireless N using the 5ghz band.The connection holds until my xbox is turned off. Then when I turn it back on it does not see the connection to the Media Center.
I updated the new firmware (my previous firmware was 2.02NA). I updated to 2.06, but then went back to see if that would make a difference and it didn't. The xbox can connect to xbox live and the internet (netflix etc...) but it does not see the home network to allow me to stream media between the computer and the xbox.I have disabled the firewall on my PC, I have disabled SPI, and do not have any other firewalls running on the network.
View 11 Replies
View Related
May 2, 2012
I just bought a new television so thought I would finally be able to get to play xbox live in a television away from the router! But of course like always there is is problems....
I'll start off by saying I understand about bridging your pc's wireless connection to the router and the wired connection from the xbox to the pc. I did the same thing last year with my old laptop and it worked fine.
However the problem lies in that my computer isn't recognising the xbox as a network device atal! They are connected using an ethernet cable (and the orange light comes on at port when xbox is turned on) but the only thing showing up in networked connections folder on the pc is the actual internet!
I had read that sometimes an ordinary ethernet cable isn't enough and it must be a cross over cable used to connect the pc and the xbox, so went into the shop today and purchased an adaptor that changes the cable to a cross over... but still nothing is showing up.
My computer is fairly top of the range, windows 7 and uses a netgear usb network card.
View 12 Replies
View Related
Feb 23, 2012
My xbox cannot connect to the internet. I'm hardwiring it. It can achieve an IP Adress and a Subnet Mask but... it's Gateway, Primary DNS, and Secondary DNS remains at 0.0.0.0
How can I fix this so that I can connect to Xbox Live?
View 1 Replies
View Related
Jul 23, 2012
What should I do cause my xbox360 the black one will Nt connect to the internet
View 1 Replies
View Related
Jun 8, 2012
I recently got a new modem. The network I'm on is Cox, and everything is running fine except for one thing: My Xbox 360. I've had no internet problems connecting my iPhone, my laptop, or my mom's Kindle Fire, but it simply won't connect with my Xbox 360.
View 1 Replies
View Related
Feb 24, 2012
I was a beta tester for MS Flight, I can sign-in on Games for windows live manually from my computer, but when I load up flight it says Connect to Live.When I press connect it says my game has been altered try re-installing Flight. I dont want to do this because if I get an error re-installing I wont be able to use flight. This problem happened when the beta testing finishe,has microsoft pulled the plug until the release date 29th?
View 1 Replies
View Related
Jun 12, 2011
I have dial up internet and I use that internet to get on xbox live yes I know it sucks but its all that is available in my area.I have connected my laptop to my xbox via an Ethernet cord CAT-6 I believe,I used to be able to get on xbox live this way then one day I tried to get on and and it would not connect to my PC it said It could not fine my IP I went on [URL] and did the troubleshooting thing and nothing worked?
View 6 Replies
View Related
