I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies
I am currently having a problem connecting a hardlined (ethernet connected) PC to a wireless printer. I want to know first of all if this is even possible. If so, how can I make this work? I know just enough about networking to be dangerous, but not enough to see what I am doing wrong. My network structure is as follows:
a 2Wire wireless modem/router provided by my ISP. a win xp laptop connected wirelessly a vista laptop connected wirelessly a win xp pc connected via the 2Wire ethernet port a Lexmark 4530 printer with wireless adapter connected wirelessly wireless config is WPA-personal (TKIP)
The laptops are able to print to the printer, but that is only because I used the CD for the printer to setup the wireless printing. When I look at the network neighborhood on both laptops, the printer does not appear. This leads me to believe that the printer is not connected to the network, the laptops have just created a printer connection (the port designation leads me to believe this as it just shows Lexmark 3500_4500 and not an actual address). The hardlined PC can connect to the internet, but is not visible to either of the PC's. When I try to type in the IP address listed on the printers config page, it doesn't see it. I can ping it, but can't connect. I think my problem is in the connection of the wireless printer. I can see it in the connection screen of the 2Wire status page, but I have a funny feeling it isn't configured properly. There appears to be no way to configure the printer outside of using their "wireless connection utility wizard" on the CD.
There is one other twist to this, I have a Dlink DGL4300 wireless gaming router that I use for my XBOX and to give me additional hardline ports for other things. I don't have it connected right now (my box is out of commission waiting on parts), but I did have it connected behind the 2Wire before without any problems. I would like for it to remain this way once I have the printing problem resolved. I am using DHCP right now with auto assigned IPs, but I can reconfigure the network to whatever will allow me to get this to work properly.
new computer installation. networked computers. one prints other doesn't. i downloaded driver on to problem computer. am not sure how to install it though. it doesn't appear anywhere once i downloaded it! windows 7 64 bit
View 3 Replies View Relatedi replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies View Relatedmy home network is of 2 wired computers and one wireless computer (this one) whats strange is that even though i have internet access, I am unable to see any of the shared folders on the wired computers even though the wired computers can see each others shared folders and the shared folders on the wireless one.what im trying to do is connect to a printer, the wireless one preferably,but i can settle for the one thats directly connected to one of the wired computers if i could. i think this strange network blindness on my side might be part of the problem. this wireless one is a xp, the one with the direct printer is a vista, not sure on the last one, im thinking xp, but if xp doesnt have a 64 bit version, then i would guess 7.
View 4 Replies View RelatedI use wifi to connect to the Internet so I don't have a modem. Is there any kind of router system or any thing I can use to connect my printer to my computer with out using a cord
View 2 Replies View RelatedI am tryng to install a printer wireless and my computer isn't communicating with the printer, although its connected to the router.
View 1 Replies View RelatedCan i use awireles printer on a computer with no wireless card?
View 1 Replies View RelatedI was having trouble getting printer to work properly-having to reboot each time to print.Uninstalled and re-installed printer software. Now computer not picking up printer wireless info.Tried using wireless configuration tool.Can't get past start to enter correct information in.Could computer picked up an other wireless router in area - not the correct one - and this infor. has locked me out. How do I get correct information in.
View 2 Replies View RelatedI am running a computer with Windows 7 Service pack 1 64 bit OS and I'm trying to install a wireless Canon MX420 printer.My computer is connected to my router through an ethernet cord and I have managed to set up my printer's wifi just fine. It appears connected on the printer's screen and I have disabled all firewalls on my computer yet it still won't detect it.
View 9 Replies View RelatedMy father gave us an old Gateway computer for the kids to use for homework. We have a Kodak ESP Office 2170 series wireless printer. How can we connect the 2, so they can print their homework out? I've downloaded the software but it won't detect or connect. Is the only way to use the printer , a USB cord?
View 1 Replies View RelatedURL Wireless_U313
this person doesn't have a wireless router. She has the above, just a USB stick. there is no cable or DSL modem, no router, nothing, just that LTE stick.
So, can a Wi Fi printer be able to connect to her computer via that little LTE stick?
I have a piece of hardware (audio device) with Ethernet network access only. I'd like to give it to my users and have them connect via Wifi. But configuring a Wifi bridge for each use is too onerous. I'm looking for a wireless bridge device with a display and keypad that allows the user to scan, select and associate with a wifi router, then bridge the wireless network to ethernet so I can attach my device. Does such an animal exist? Price is not a major factor.
View 5 Replies View Relatedjust bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies View RelatedSo lately my computer's wireless network has started to get really bad, we have 100mbit, and it only gets about 0.3. This seems to be an issue with the range, or something, since if i move the computer right next to the router, it runs at about 50-60mbit. Now a few days ago i decided to get an ethernet cable to try and solve the issue, but my computer doesn't detect a LAN connection, only the wireless one ( atleast it doesnt show up among the other connections). Some weeks ago the wireless connection worked nicely, but now suddenly it doesnt anymore. Currently i'm typing this from an old mac computer, since my internet doesn't work at all on my pc.
View 11 Replies View RelatedHow do i enable my desktop computer to recognize my wireless router using the Ethernet port
View 1 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedHow do i enable my desktop computer to recognise my wireless router using the ethernet port
View 2 Replies View RelatedRunning Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications), in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200. Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity. Things I have done to date: removed Linksys E-series software and reloaded, updated drivers, changed all wiring to router, and checked IP addresses and they are different.
View 2 Replies View RelatedUnable to find the printer I am sharing on wifi on my home network !!
View 4 Replies View RelatedToday when I tried to add a network printer,list of browsed printers in network is shown as pc1/hplaser1, pc1/hplaser2, pc2/hplaser1, pc7/hplaser1 and so on. They are all network printers, not local printers.Then why it is not showing the printers alone, why they show the pcs in the network and the same printer is shown in different pcs as they are installed in all of them.
View 2 Replies View RelatedI need to connect my hp printer to my computer but I do not now my network security key. My network is WPA I think.
View 1 Replies View RelatedI'm trying to add a printer back to my laptop. I've had to do this several times because our internet drops a lot.This time for some reason I can't add the wireless printer back to my laptop. When I add the printer it finds it but then it can't establish the tcp/ip connection.My workstation at the house can print to the wireless printer with no problem.
View 2 Replies View RelatedI need my network password to set up my printer with my computer
View 1 Replies View RelatedIs there any way to add a printer to my computer that is on a completely different network? It's a small residential setup on both ends.
View 2 Replies View Relatedi have 2 printer one is connected through usb, i want to connect one more printer through lan using switch....how to connect?
View 3 Replies View Relatedi cant share my hp (laserjet3050series pcl 6) printer with my computer
View 1 Replies View Relatedhow to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedI have a HP office jet 40vi printer that for the past several years has been connected to an XP networked computer and it has been shared for printing with other computers in my classroom. This summer the computer was switched with another XP networked computer.I installed the printer using the disk to the new computer, but I am unable to get the computer shared. When I try to share it and list it in the directory I get the following pop-up: Printer settings could not be saved.Operation could not be completed.
View 7 Replies View RelatedI have a network printer that I would like to use in a room away from the router. Can I use an RJ45 splitter so these two devices can share the same cable? It doesn't have wireless capability.
View 11 Replies View RelatedI am trying to share a printer on Windows Server 2003 machine so that my other computers can access the print share from my server. originally i was hosting the print server from one of the workstations (running Windows XP SP2). I now want the printer share to be hosted from the server. I set up the printer correctly (to my knowledge). i was able to set it up and print a test page. But when i go into properties and attempt to share the printer, i click on Share this Printer and enter in a name, i designate it to list the printer in the directory. Then i click apply and ok... and nothing happens. the printer is not shared. When i go back into properties, it shows that i am not sharing the printer.
View 2 Replies View RelatedI HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies View RelatedI have a desktop computer using win 7 that works well with an hp c6100 series printer using a USB cable. I cannot connect wirelessly to this same printer from my netbook. both computers are using the same workgroup. When I tell the netbook to print it does not display anything, just doesn't connect to printer.
View 1 Replies View Related
