Linksys Wireless Router :: E3200 Drops Ethernet Connected Computer

Feb 1, 2013

Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications),  in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200.  Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity.  Things I have done to date: removed Linksys E-series software and reloaded,  updated drivers, changed all wiring to router, and checked IP addresses and they are different. 

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: Speed Drops When Connected Through E3200

Mar 7, 2012

Got a Linksys E3200, and a gigabit card, even two, Realtec and Intel, have a connection ggbit. If the power cord plug directly into netcard, all at great, the tracker up to 80 MB per second, shakes on speedtest.net, shows 780 240 + Mbps. When i connect my inet through the router, the speed drops to 12 MB(100 Mbit) and speedtest the same, but in the the web interface in the statistics shows that everything is connected to a gigabit.

Plus, when I ping my ISP's website (ip -t ) and assume [URL] click on the test, the router with 1ms pings are beginning to rise to 30 ms, and when it is directly in netcard, it stable 1ms.... When through the router, torrent shake it just do up to 100ms jumps. I have all the settings , and set up his hands, and a manager, all for nothing. It started five days ago, before that everything was ok. Can a router burn? Rather it gigabit controller?

View 4 Replies View Related

Linksys Wireless Router :: E3200 Drops Connection Every Day?

Jul 4, 2012

I got an E3200-RM (refurbished).
 
I did not do a MAC Address Clone, when I connected it I just called my ISP and they enabled it. Internet connection with all devices right there, no problem.
 
Problem started next day, every day I have to do a hard reset because when I wake up I have no  connection with all devices (1 Ipad, 2 Iphones, 2 PCs, 1 Xbox 360, 1 PS3): My SSID is seen on the network but no device can connect to it.
 
I changed the Channels to manual as said on other threads, but didn't work.
 
In addition to that, when I try connecting my PC with the ethernet cable to the router -instead of wireless-, I have no internet connection on the PC and any other device that I try to reconnect to the router wirelessly can't connect anymore (have to do a hard reset again and unplug the ethernet cable).
 
the WRT54G worked perfectly for me...

View 6 Replies View Related

Linksys Wireless Router :: E3200 - Internet Speed Drops?

Jul 17, 2012

We recently purchased a Linksys E3200 router, because our old router didn't take advantage of our internet speed. The router works fine, though the internet speeds again isn't as much as expected.
 
With a wired connection, we only get 80 Mbit/s of our full 120 Mbit/s, according to Speedtest.net. The Cisco Connect built-in speed test is even worse; only 40 Mbit/s. When we directly plug the computer into the modem, we get the full 120 Mbit/s, which indicates that the modem does have the connection speed. The router just doesn't give it to the computers attached.
 
I don't know about my wireless speed, as my wireless card in the laptop clearly is the bottleneck (it can only connect at 65 Mbit/s). Atheros AR9285 ftw.
 
We tried different cables, the one included with the router gives the same speed.

View 9 Replies View Related

Linksys Wireless Router :: E3200 Drops Connections After Firmware Upgrade?

Jun 5, 2012

I have a E3200 and upgraded the firmware last weekend to 1.0.0.4 and now I get dropped connections every few minutes.  I was working form home and VPN into a west coast client and was getting dosconnected every few minutes so I thought it was possibly their VPN but when I checked my outloook it was also disconnected and is not associated with their VPN.  I called Comcast and they said the modem has been online for 19 days so now everything points to the router. 

View 5 Replies View Related

Linksys Wireless Router :: E3200 - How To Know If Connected Through N Network

Sep 29, 2011

I have an N wireless adapter for my xbox 360. I want to make sure I am connected through N network, getting 5gbps.

View 6 Replies View Related

Linksys Wireless Router :: E3200 Setup With HD And TV Connected

Oct 8, 2012

I'm going to lay out my equipment and how Id like to set it up. Im hoping to get some feedback on specific settings for my equipment as I am rather clueless. How I'd like to have everything running:internet through the gateway (obviously)E3200 setup as wireless router with HD and TV connected.NAS on E3200 for backups and dropping files on to watch on TV both laptops login manually to VPN service.I was previously able to create a symbolic link in windows for dropping files onto NAS easily enough. I wasn't able to see the HD on the TV using it's MediaShare function. That was one of the main reasons why I got the E3200 with USB port.Also, when I connected the TV to the E3200 after setting up my previous RG with E3200 I couldn't get internet signal. With the DLNA function of the TV I'm thinking it might be a situation where I have to access the symbolic folder on my computer in order to access the NAS. This would probably be a painfully slow nightmare but the only solution I can think of.

View 4 Replies View Related

Linksys Wireless Router :: E3200 No Ethernet Connection Or Cable Modem

Mar 6, 2013

We have a E3200 wireless router but our only connection is wireless. There is no Ethernet connection or cable modem. Presently I am unable to bring up the web page ie...10.100.x.x for entering the id/pw to login. Router is setup with default settings. Is there a setting that needs to be changed from the setup menu or this type of setup will not work with this router.

View 9 Replies View Related

Linksys Wireless Router :: E 2000 Drops All Connections When Connected With 4th Wire

Sep 2, 2011

The router works fine until I plug the 4th wire in the back, which goes to a 2nd desktop computer, then it is only a matter of time until the router drops all internet connections including the direct wire to desktop #1, wireless, and the other two wires.This is my 2nd e2000 router since Amazon replaced the first one after about 4 months as it was having the same problem.

View 5 Replies View Related

E3200 - Gigabit Ethernet Wireless Router With DD-WRT?

Feb 1, 2012

But I currently have a Linksys E3200 I bought in a moment of weakness after an evening of being pissed off at bricking my old WRT610N. (soft bricked, but I'm beyond screwing with it)

There's nothing *wrong* with it, but I am interested in something that either comes preinstalled with DD-WRT, or is well supported (ie easy to install on) by DD-WRT. I plan on selling the E3200 once I find something to replace it.

My requirements:
-Gigabit
-5 GHz (I have a file server/HTPC; I don't want to be limited to gigabit ethernet)
-$150 or less (I know $150 is high, but I figure I'll get close to that for the E3200)

View 4 Replies View Related

Linksys Wireless Router :: WRT54G2 Ethernet Cable Not Connected

Feb 17, 2013

I'm using a refurbished WRT54G2 v1.5 router.  I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.

View 6 Replies View Related

Linksys Wireless Router :: E2000 - PS3 Error / Ethernet Cable Is Not Connected

Nov 19, 2011

Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router.  If I reset the cable modem, it will work for 10-15 minutes until it errors out again.  If I plug the PS3 directly into the cable modem, it works fine. I'm really confused. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems.

View 8 Replies View Related

Linksys Wireless Router :: X3000 How To Access The Connected HD From Computer

Jul 18, 2012

The HD connected to my X3000 Router is recognized and visible (shared folder) from my media player connected to my TV. However I can't see it from my computer to add/remove files. Isn't it possible to administer the files on the drive without disconnecting it from the router and connecting it to the computer?

View 2 Replies View Related

Linksys Wireless Router :: Installing WRT54g2 Error - Ethernet Cables Not Connected

Dec 28, 2008

I am trying to install my router but I keep getting the error message that my ethernet cables are not connected. I have tried several times and everytime I know that the cables are in correctly. Is there anyway to solve this problem?

I am running in XP and my router is  WRT54G2.

View 5 Replies View Related

Linksys Wireless Router :: E1200 Computer Says That Its Connected But Have No Internet Access

Jun 22, 2012

I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?

View 5 Replies View Related

Linksys Wireless Router :: WRT610N Connected To Ethernet Port Of Previous Internet Modem

Dec 2, 2011

I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
 
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?

View 4 Replies View Related

Linksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds

Jan 18, 2012

I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get  reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?

View 1 Replies View Related

Linksys Wireless Router :: Slow Speed (50mb) When Computer Connected To E4200

Jun 30, 2012

I have the E4200 with latest firmware . When I connect my computer to the E4200 and that to my modem im getting about 50mb speed. If I disconnect the E4200 and connect my computer straight to the modem I get about 95mb speed?I have the Virgin Broadband 100mb service and all is working fine at their end.

View 2 Replies View Related

Linksys Wireless Adapters :: E2000 / Signal Strength Drops To 50% When Connected

Jan 2, 2012

I have the following problem:
 
Adapter: WMP600N
Router: E2000 (N-only)
OS: Windows 7 X64
 
When I'm not connected to my wireless network, the signal strength is 4 bars (out of 5)Once connected, it drops to 2 bars. Speed is 39 Mbps. Why?I have updated the drivers (strangly, it says the drivers are from Ralink Technology. Corp, version 3.00.00.0041 built by: WinDDK)

View 4 Replies View Related

Linksys E2500 Router - Computer Connected But No Internet?

Dec 28, 2011

Well i recently purchased a Linksys e2500 router,so i connect it to my modem and then to my PC, all by Ethernet cable(no wireless) as i want my pc connected by cable, i go through the set up CD and it finishes and says you are now connected to your router but..... not to the internet and it tells me to restart the modem with i have done, i have also tried power cycling modem, router and PC, but i still get the same old problem and when i go in network connections my local area connection says i am connected but it wont let me use the internet. also above when i have been trying to set up the router this "Internet Gateway" pops up in my network connections and it is disabled and whenever i try to enabled it it just says failed.

I'm on Cable broadband my modem is a Motorola SB5101 SURFboard cable modem and the router is an Linksys Cisco e2500 and i am using windows xp sp 3

View 4 Replies View Related

Linksys E3000 Router / Ethernet Connection Is Dropping While Wifi Stays Connected

May 27, 2011

I have Comcast cable internet routed through a linksys E3000 router. My desktop is connected to my router via ethernet and my various other devices including my laptop are wifi connected. It seems almost at random that my desktop will lose its connection.Windows will show me as still being connected and my network connection will show a normal status until I atttempt to repair it then it will change to limited or no connectivity. Through all of this, my other devices all still have a wifi signal (I don't use more than 1 or 2 at the same time). I can reconnect to the internet by unplugging my ethernet cable then reuplugging it back in and my connection will start working again. I've also had several blue screens, and when I checked the dmp files it revealed my network card driver as the culprit, yet I have reinstalled and even clean installed the microsoft signed driver. I have also attempted to reboot both my modem and router to no avail.

Microsoft XP
Marvell Yukon ethernet adapter on a biostar mobo
C:Documents and SettingsMain>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sn1
Primary Dns Suffix . . . . . . . :

[code]...

View 5 Replies View Related

Linksys Wireless Router :: Set Up E3200 As WAP?

Aug 3, 2012

Trying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address

View 3 Replies View Related

4-5 Connected To Router And Connection Drops Randomly

Jan 23, 2011

Here's the problem, there are 4-5 computers connected to their router's network through both wire and wireless. Some of the other computers are used to stream tv dramas and what not, and it really kills the connection and I am barely even able to open a simple webpage.

View 2 Replies View Related

Print To A Printer On A Computer Via Wireless From Computer Via Ethernet?

May 22, 2012

I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.

View 4 Replies View Related

Enable Desktop Computer To Recognize Wireless Router Using Ethernet

Mar 20, 2012

How do i enable my desktop computer to recognize my wireless router using the Ethernet port

View 1 Replies View Related

Linksys Wireless Router :: E3200 Only Getting 130.0 Mbps?

Jun 21, 2011

after messing with it for a 2 days since I got it I cant seem to get more than 130.0 my last router had 300 same setup same distance  

View 9 Replies View Related

Linksys Wireless Router :: E3200 - Connect USB Hub?

Oct 18, 2011

I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Add New WAP In Home?

Sep 3, 2012

I have been using an E3200 and it has been working great. I know have a need for wireless coverage in a distant part of my house and the current router won't get there. I also need wired in that spot of the house as well. I thought to buy a e1200 to use it as a WAP for that part of the house and also to have a few Ethernet ports come off it. Can I connect to my original E3200 wirelessly from the e1200 and then use the e1200 as a WAP and for Ethernet?

View 7 Replies View Related

Linksys Wireless Router :: Different E3200 Upgrade To 1.0.04?

Nov 13, 2012

I just upgraded my router from 1.0.03  to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Needs Reboot Once A Day

Feb 18, 2012

I have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?

View 5 Replies View Related

Linksys Wireless Router :: E3200 Gets Wrong IP?

Jun 15, 2012

I'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.

View 3 Replies View Related

Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better

Jul 6, 2011

I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200.  I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer).  I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200. 

View 8 Replies View Related

Linksys Wireless Router :: No WAN DHCP Log On E3200?

Jan 11, 2012

I used to have a Belkin router which was losing connectivity throughout the day for a few short moments.  After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault.  Since it was old router I decided to replace it with a E3200.  This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before.  I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it.  I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating).  I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
 
Where can I find a log to see DHCP activity (on the WAN interface)?  There is a DHCP log which shows all the LAN activity but this is not what I need for this issue.   I find it hard to believe a mature vendor like Linksys doesn't log this activity?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved