Enable Desktop Computer To Recognize Wireless Router Using Ethernet Port?

Mar 20, 2012

How do i enable my desktop computer to recognise my wireless router using the ethernet port

View 2 Replies


ADVERTISEMENT

Enable Desktop Computer To Recognize Wireless Router Using Ethernet

Mar 20, 2012

How do i enable my desktop computer to recognize my wireless router using the Ethernet port

View 1 Replies View Related

Ethernet Port Doesn't Recognize Any Ethernet Cord

Dec 26, 2011

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.

------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo

[code]....

View 7 Replies View Related

Computer Won't Recognize Ethernet Cable?

Jul 30, 2011

I just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:

Windows IP Configuration

Host Name: bouss
Primary Dns Suffix:
Node Type: Broadcast

[Code]....

View 5 Replies View Related

Computer Ethernet Port Recognizes Modem But Not Router

Feb 10, 2011

My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.

I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.

View 6 Replies View Related

Desktop Won't Recognize Belkin Router

Apr 11, 2012

My belkin router F7D4401 is not being recognize by my desktop whereas i can connect to the same without a problem using my laptop. The belkin router management software shows the router as connected when i joined it my laptop but the desktop always says not connected.

View 5 Replies View Related

Desktop Doesn't Recognize Belkin Router

Mar 18, 2013

My Dell destop with Windows 7 all of a sudden doesn't seem to recognize my router, yet my laptop works fine (which I'm using now). After reading other posts, I reset the router with no results, used a new cable from the Belkin to the computer, changed ports, checked connections, restarted; nothing. When I do an ipconfig, a small window pops open and goes off before I can make anything out. I undestand Belkin's IP address is 192.168.2.1 and I'm showing that my IPv4DHCP Server is that, as is my DNS server. The IPv4WINS server shows nothing.

View 9 Replies View Related

Linksys Wireless Router :: WRT160N V3 - Computer Can't Recognize It Whenever Try To Set Up Security Code

Feb 18, 2012

Whenever I try to set up a security code for any of the settings (WEP/WPA etc), as soon as I hit save my computer does not recognize it and I get kicked off the internet and have to restart my router.  I have the Linksys model number WRT160N V3

View 2 Replies View Related

Ethernet Port On Computer Not Working?

Jul 2, 2011

My custom built desktop is not recognizing an ethernet cord. The lights are not coming on when I plug it in. The device manager does not show network adapters. Im not sure where to find it/ not sure its there.

View 6 Replies View Related

Computer Won't Recognize Router - Lost CD?

Sep 2, 2011

my computer wont recognize my router and i lost the cd, what do i do

View 1 Replies View Related

Computer Suddenly Doesn't Recognize Router

Jul 23, 2011

My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.

View 2 Replies View Related

Connecting Desktop To Wireless Router Using Ethernet Wire?

Jun 24, 2011

I just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?

View 5 Replies View Related

Computer Does Not Recognize Any Wireless Networks

Aug 17, 2011

My son is at college and his roommates can connect to wireless, but his computer does not recognize a network. It says the settings saved on the computer do not match the requirements of the network

View 1 Replies View Related

Linksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working

Jul 3, 2012

There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.

View 2 Replies View Related

Hooking Up A Desktop Computer To A Wireless Router?

Mar 16, 2012

What do I need and and what ports etc. do I put them in?

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Port Of Local Computer Or Port Of Server

Nov 21, 2012

I want to use Qos in EA2700. I want to know whether the port in the Qos means the port of local computer or the port of server.  Or is it a source port or a destination port?

View 3 Replies View Related

Linksys Wireless Adapters :: Computer Won't Recognize WMP600N?

Mar 28, 2011

I just bought a Wireless-N PCI adapter (WMP600N) and followed the instructions given by the CD. I installed the card into an empty slot and ran the CD to install the drivers, but error message 221 keep appearing to tell me that the computer can't see the adapter.
 
My computer runs on Win 7, 32-bit so I have downloaded the latest drivers for Win 7 from your website. Now I want to manually update my adapter to the Win 7-driver, but I don't know how. The adapter won't even show up in the device manager.

View 2 Replies View Related

Dell :: Studio 1555 - Computer Does Not Recognize Any Wireless Networks?

Jan 4, 2013

I have a Studio 1555 64bit  running on Windows 7, within the past  few  weeks, my wireless connection sporadically turns off, the wireless router is ok, I can connect wifi to my phone. My computer does not recognize any wireless networks, although there are several in the neighborhood. Sometimes it randomly comes on.

View 2 Replies View Related

HP SR2170NX / Will Wireless Adapter For A Desktop Work With Router Setup By DSL On Same Computer

Apr 25, 2011

I have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.

View 2 Replies View Related

Possible To Copy Adapter And Paste Into Desktop To Enable Wireless Connections

Nov 18, 2011

My Win 7 shows 2 network adapters in device manager...in my Acer ao 722 net book. My desktop has XP and only shows one adapter..I believe one of the adapters in the Acer net book is wireless ( being a new machine ) and the desktop is an older pc with a wired adapter. Could i copy the wireless adapter and paste it into my Desktop, to enable wireless connections? Obviously, we are not talking about actual cards, they are all integrated into the Motherboard.

View 2 Replies View Related

Print To A Printer On A Computer Via Wireless From Computer Via Ethernet?

May 22, 2012

I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.

View 4 Replies View Related

Dell :: Netgear N600 - Desktop Doesn't Recognize Internet

Jan 13, 2013

I have a Dell desktop with Windows 7, a Dell laptop with Windows XP & a Toshiba Satellite laptop with Windows 7. I bought a new router for faster internet speed - Netgear N600. I now have internet on the two laptops, the Kindle Fire HD & my Iphone. I cannot access the internet on the desktop. It shows that I am connected to an unidentified network but I can't get online. The techs I talked to said it's a problem with my computer but I didn't have that problem before.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Drops Ethernet Connected Computer

Feb 1, 2013

Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications),  in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200.  Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity.  Things I have done to date: removed Linksys E-series software and reloaded,  updated drivers, changed all wiring to router, and checked IP addresses and they are different. 

View 2 Replies View Related

Broadband :: Pc Won't Recognize Ethernet Connection?

Jul 28, 2011

I have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.

View 5 Replies View Related

Computer Won't Recognize Connection?

Mar 22, 2011

The main computer received a virus and I had to reinstall the operating system. When I did, however, all settings disappeared. The lights on the modem and router are fine, and the secondary computer has full access to the Internet. I also can use my Wii with the Internet. I tried setting up the router again but the main computer won't load the web-based configuration utility page. The secondary computer, however, can. I tried plugging the modem directly into the computer but the computer didn't seem to recognize it either. I bought a new router, thinking if I got software it would automatically set everything. However, the router I received came with zero software. I plugged it in and the computer still couldn't connect to the config page. I am at a loss as what else to do here.

My old router is a Motorola WR850G and my new one is a Netgear WR614 v9. Either would be fine to use, as long as I can get both computers to connect. The host computer has XP and the secondary Vista.

View 2 Replies View Related

No Internet Access On Desktop With CGD24N Router Ethernet?

May 6, 2012

I'm currently with Bigpond Cable with a CGD24N router and cannot connect the desktop with the ethernet.My laptop works with the ethernet and wireless The router shows the connection as red/orange on the desktop when it should be yellow for 10mbps or green for 100mbps, is this a fault of the router, computer or possible virus?

View 2 Replies View Related

My Computer Doesn't Recognize Any Addresses

Aug 30, 2011

when I click on an icon like yahoo or facebook or any other icons my compuyrt says doesnt recognize,typed in add wrong, cant figute it out. Its on dsl an my laptops work fine from my wireless.

View 2 Replies View Related

Other Computer Will Not Recognize Network Security Key?

Oct 31, 2011

I have set up my desktop (has wireless) running Vista, which uses a broadband usb modem, AD HOC all was ok. Then set up the wireless laptop running xp, It reconizes the Desktop but wants a network security key(password). I tried useing the "password" that I used to set up the desktop with but the Laptop will not accept itSays the network xxxxxxx requires a network key(aso called a WEP key or Wpa key)....... Type in the key, and then click Connect.

View 4 Replies View Related

Computer Doesn't Recognize Internet

Aug 18, 2012

My computer does not see the internet. If I do a restore to an earlier restore point, it can see the internet,, but when I do a restart it goes back to not allowing me to access it. The weather gadget cannot see the internet either. The OS is Win7 64.

View 1 Replies View Related

Connecting Ethernet From Spare Port To Wireless Router

Oct 5, 2012

Laptop has 2 ethernet ports and receives the internet via one of those Ethernet ports. Can I plug a ethernet lead from my spare port on my laptop to a wireless router and create a wireless network (via the internet from my laptop)? Is this possible and how do I do it ?

View 11 Replies View Related

Wireless Router Not Recognizing Ethernet Cable In The WAN Port?

Jul 10, 2012

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?

View 1 Replies View Related

Computer Won't Recognize 2 TB WD Network Storage Device

Apr 4, 2013

After using my 2 TB WD network storage device on other systems both wirelessly and via an ethernet connection, I decided to install the device on a new system via a wired connection. Unfortunately, my computer (WIN XP) won't recognise the device when using a direct connection though my talk talk supplied D-LINK wireless router. I have contacted WD and talktalk and gone through all the diagnostic processes but it still won't recognise the device. I have been able to connect this device through an older D-LINK router (still wireless) on the same talk talk ISP with no problems so I can't understand why it won't connect here. The WD device reports no problems but I can't access it, even when all firewall and AV programs are disabled.

View 3 Replies View Related

Computer Won't Recognize 5.0ghz WLAN Connection

Mar 2, 2012

I'm running Windows 7, and we have a dual-band router on 2.4ghz and 5.0ghz. My wireless LAN card is capable of picking up both frequencies, but will not even recognize the 5.0ghz connection, only the 2.4 one. I've checked all of the settings, "country codes", everything I can think of, but I can't seem to find a reason.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved