I'm currently with Bigpond Cable with a CGD24N router and cannot connect the desktop with the ethernet.My laptop works with the ethernet and wireless The router shows the connection as red/orange on the desktop when it should be yellow for 10mbps or green for 100mbps, is this a fault of the router, computer or possible virus?
View 2 RepliesDesktop cannot connect to internet through Ethernet, what do i do?
View 1 Replies View RelatedMy homemade computer onto the internet through Ethernet. I have a cable attached to my computer and it is lighting up as if it were working but I am not connected to a network. I know it is not a problem with my Ethernet cable because I have tried it on other computers successfully. When I entered ipconfig/all in the command prompt it showed up with media state as disconnected and no IP address.
View 4 Replies View RelatedI just did a fresh install of Windows XP 64 on an old computer (Asus) in my house. It's connected to an ethernet cable, but when I try to go online it says there is no connection and explorer "Cannot find server".I'm getting so frustrated.
View 1 Replies View RelatedMy family just gave me their old Mac desktop, I wiped it clean and then tried to connect to the internet at my house and it tells me I have invalid password for the wireless. I also tried to connect it directly via ethernet cable that works and it will not connect. I want to connect my Mac directly with ethernet. All the other computers with internet work in my house so I know its not the internet. I will post below my computer specs and internet specs which I got from my other windows PC. I've tried manually putting in the ISP and DNS and nothing works.
[code]...
I have managed to get the wireless portion of my router working for the two wireless laptops in my house (one is Win XP, the other Linux) and am now trying to connect via rj45 ports + ethernet cat5e cable, my router and desktop computer that is running Windows XP. My connection type, set when I setup my wireless router, is pppoe.I have my router connected to a SpeedStream Modem, my ISP is Bell.I am worried that I will have to purchase a hub/switch in order to allow the desktop (PC3) to access the internet, although it seems to me (from reading other internet postings) that what I am attempting to do should work with just the modem+router setup that I have.I haven't worked with Windows LAN networks before (wired, not wireless) I have only dealt with my laptop's wireless internet connections and it seems much simpler to deal with than wired lan connections.
View 1 Replies View RelatedI am trying to bridge internet connection received from my laptop to my desktop with an ethernet cable. Both machines are running win 7.When I try to connect to my local area connection on the desktop most of the time it fails and I'm left with 'Unidentified network' and no internet connection. Sometimes, rarely it does connect properly but I get a notification about there being an IP conflict in the network, but things work as they should.When I diagnose the problem it tells me that "Local Area Connection doesn't have a valid IP configuration"
View 5 Replies View RelatedMy desktop with Windows Vista is connected to the modem with a standard ethernet cord, and when I try to plug the same cord into my laptop I don't get any internet access. My laptop is running Windows 7. I have tried powering the modem off for 15 seconds multiple times, but to no avail. I am just trying to make this connection work until I purchase a router.
View 7 Replies View RelatedI just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies View RelatedHow do i enable my desktop computer to recognize my wireless router using the Ethernet port
View 1 Replies View RelatedHow do i enable my desktop computer to recognise my wireless router using the ethernet port
View 2 Replies View RelatedSo I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies View RelatedEarlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
The signal strength usually shows low or very low. I`ve been changing the channels through 1,6,11, but it doesn`t change the signal strength. My modem is a Netgear CGD24N v2. The computer operates ok but i`d like the signal strength to show better than low.
View 12 Replies View RelatedSince sometime on 10/7/12, I can no longer access the internet from my desktop.I'm connected via wired Ethernet but have also tried connecting via a USB WiFi Modem.Network and Sharing Center shows "Unidentified Network No network Access".All other machines on my home network have internet access (one other desktop as well as multiple WiFi clients).I've tried pinging the router (192.168.1.1) .. request times out.I've tried reset TCPIP and Winsock Stacks, Disabling / Reenabling the NIC with no effect.In troubleshooting, I've found a registry entry which seems to be different from that in my working desktop and which I cannot change.It's HKLMSYSTEMCurrentControlSetservicesTcpipParameters. [code]
View 11 Replies View RelatedI seem to suddenly be completely unable to access the internet on my desktop computer.
View 14 Replies View Relatedconnectig two computers into one modem
View 2 Replies View RelatedMy wired desktop cannot access the internet. Its still connected to my home network however. Every other computer on the network can connect to both the network and the internet just fine. the wired desktop is running windows xp. I have tried renewing the ip address, resetting IE settings, disabling the firewall, and I am currently running an anti-virus scan.
View 2 Replies View RelatedI cannot access internet through my ethernet. There is nothing wrong with the cable and the router is completely fine.
View 2 Replies View RelatedSo I have a Windows HP Pavilion w1907 desktop. My computer says that I am connected to a wireless network. However, I cannot use any programs, like AIM or Mozilla Firefox, iTunes, or any other programs that require internet connection to work. I visited the Network and Sharing Center, which says I'm connected to an unidentified network but not the Internet.
View 6 Replies View RelatedSo I have a Windows HP Pavilion w1907 desktop. My computer says that I am connected to a wireless network. However, I cannot use any programs, like AIM or Mozilla Firefox, iTunes, or any other programs that require internet connection to work. I visited the Network and Sharing Center, which says I'm connected to an unidentified network but not the Internet.
View 5 Replies View RelatedThe other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...
View 1 Replies View RelatedI already configured my LAN connection to only have an IP address, and a subnet mask, leaving default gateway blank
View 3 Replies View RelatedI have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedI am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies View RelatedI have a desktop running windows XP Professional x32 SP3 and my network adapter is a Realtek PCIe GBE Family Controller. The desktop is connected to the network with an ethernet cable.Up until yesterday the internet connectivity just stopped working. I am seeing a very low number of received packets as opposed to the high number when it was working. It is showing that it is connected to the network but I still can't access the internet. Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses. I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn't working. However the weird thing is that if assign a static IP address to it...it works. But I can't do this because I am not suppose to hook it up to the ports assigned to the switch for static IP's. It has to be connected to the DHCP switch. Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch. Also even if I try to reset, renew or release the IP...when I connect again it still gives me the same IP. It wont change.
View 1 Replies View RelatedAppended below are the following log files:
0. ipconfig /all 1. TechGuy SysInfo Log 2. HijackThis Log 3. attach log from dds.scr (note: this program did not create a file named dds.txt.) 4. ark log from GMER 5. FSS log from Farbar *************************************************************************** ********** 0. ipconfig /all Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsRick>ipconfig /all Windows IP
[code]....
My Windows 7 desktop cannot use the ethernet connection for some reason while it works just fine on my Macbook Pro. When I run ipconfig in CMD I'm seeing a 169 IP address which from my googling of the issue I understand is invalid. When I run network diagnostics to try to fix it the result is that "Local Area Connection" doesn't have a valid IP configuration, and that this is now FIXED. My network and sharing center screen even claims I have internet access for a few seconds (instead of a red x between the network and internet icons) before dropping out again.I've been trying all kinds of stuff to try to fix this like ipconfig /release and /renew but this doesn't work because it says an address hasn't been associated with the network endpoint and so no operation can be performed "while it has its media disconnected."
View 9 Replies View RelatedIs there anything I need to do to my main computer to allow ethernet split cable to function, i.e. recognition of 2nd machine by main machine?
View 1 Replies View RelatedMy son is getting a Cyberpower PC Black Gamer Ultra Gua250 Desktop for Christmas. It comes with only a 10/100/1000Base-T Ethernet. Is there a product I can purchase to connect his pc to our DSL without having to run an ethernet cable all through the house?
View 4 Replies View RelatedEarlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
Recently I've been trying to switch to a wired connection. The cord and the port works because I tested and the connection works fine with my laptop. But my desktop won't connect. The light where the cord plugs in lights up but my desktop does not detect it.
View 1 Replies View RelatedI have a desktop computer for gaming and a laptop, but when I was assembling my desktop I didn't put in a wireless card thing so i've been able to get internet since by connecting my desktop and laptop (which has wireless) with an Ethernet cable and everything has been fine.Apart from a few days ago when it all stopped working, my laptop works fine as does my desktop but the desktop and laptop can't seem to connect anymore.
View 3 Replies View Related