The other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...
View 1 RepliesI've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedI have intel Atom system, i installed windows xp sp2,i connected to internet but my browser doesnt works, i checked my modem, cable all are working fine then i pinged my ip in cmd and default gateway and website they are ping perfectly but i cant browse in ie, firefox,Even i replaced operating system but it doesn't work.
View 2 Replies View RelatedI have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.
View 1 Replies View RelatedI have 2 PC's on a LAN, both Windows 7 Ultimate. Both PC's is connected to the same router via ethernet.Now PC number two has internet access and works great, but PC number 1 also shows "Internet Access" in the system tray and also in the network map, it shows that it is connected to the internet. But when I open ANY browser(FF, IE, Chrome) it cannot connect to the internet. Skype also cannot connect. As I said, the other PC (PC2) can connect fine and has the exact same setup as PC1. However, on PC1, when I manually connect via a dial-up broadband connection using the SAME username and password to my ISP as I used in the router config, it connects. The problem is that it loses the connection every 2 minutes or so...(failed to connect...redialing...). What I can do on PC1 to make it connect to the internet via the router the same way the other PC does?
Also, the two PC connects fine over the LAN between each other, but as I said, PC 1 cannot connect to the WAN the same way PC2 does. Things I tried: I did a TCP/IP stack repair and rebooted. Nothing. I disconnected the 'working PC' from the LAN, nothing. I uninstalled the Antivirus and Firewall, nothing...
Router: Siemens Giga 762SX
Network adapter on PC1: Realtek RTL8139/810x Family Fast Ethernet NIC. I do have the latest drivers installed
Is there anyway that I can access Remote access my computers via the internet browser.
View 4 Replies View RelatedI am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies View RelatedI run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View RelatedIs there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
View 3 Replies View RelatedI cannot access internet through my ethernet. There is nothing wrong with the cable and the router is completely fine.
View 2 Replies View RelatedI already configured my LAN connection to only have an IP address, and a subnet mask, leaving default gateway blank
View 3 Replies View RelatedI have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedI am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies View RelatedI have a desktop running windows XP Professional x32 SP3 and my network adapter is a Realtek PCIe GBE Family Controller. The desktop is connected to the network with an ethernet cable.Up until yesterday the internet connectivity just stopped working. I am seeing a very low number of received packets as opposed to the high number when it was working. It is showing that it is connected to the network but I still can't access the internet. Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses. I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn't working. However the weird thing is that if assign a static IP address to it...it works. But I can't do this because I am not suppose to hook it up to the ports assigned to the switch for static IP's. It has to be connected to the DHCP switch. Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch. Also even if I try to reset, renew or release the IP...when I connect again it still gives me the same IP. It wont change.
View 1 Replies View RelatedAppended below are the following log files:
0. ipconfig /all 1. TechGuy SysInfo Log 2. HijackThis Log 3. attach log from dds.scr (note: this program did not create a file named dds.txt.) 4. ark log from GMER 5. FSS log from Farbar *************************************************************************** ********** 0. ipconfig /all Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsRick>ipconfig /all Windows IP
[code]....
I'm currently with Bigpond Cable with a CGD24N router and cannot connect the desktop with the ethernet.My laptop works with the ethernet and wireless The router shows the connection as red/orange on the desktop when it should be yellow for 10mbps or green for 100mbps, is this a fault of the router, computer or possible virus?
View 2 Replies View RelatedI am trying to set up a minecraft server but I am having trouble port forwarding. I port forwarded a linksysWRT160v3 router but still nobody could connect. So I read online that I might have to also port forward something sitting next to my router. (IDK what it is, i think its a modem or something) It is a Efficient Simon Speed Stream 5100. It says to type in 192.168.0.1 in my web browser for advanced setup but when I did it took me to a search engine.
View 3 Replies View RelatedI do not have access to internet (I'm on some unsecured internet from around here now, very slow). When I start the internetdiagnostics from windows, he says it's the modem or the connection from laptop, router, modem to internet. However, the lights indicating internet and dsl on the modem are brightly burning and the router shows nothing abnormal too.
I have a WPA2-PSK security, the modem is Zyxel. Also, the ethernetcable portal on my laptop is broken, so I can't do anything non-wireless. My phone has the same problem with this internet, it can get a connection, but no internet.
I have been using this wireless internet connection for a long time, but the other day I went to go online, it didn't work. Ive tried lots of things but nothing seems to work.I'm able to acess the same wifi from my phone and it works fine, so i know its not the actual network, its something on my side.pics of xirrus screenshot & intel proset config attached[CODE]
View 11 Replies View RelatedJust set up a ClearOS gateway - internet works, DNS everything OK.I can ping the two routers (set up as switches) but i cannot access them via the browser from my PC (CYLON). I CAN access ClearOS panel from my PC?
View 1 Replies View RelatedI am new to cisco products and I am trying to setup an aironet 1242ag. I have figured out the ip given to it but, cannot access it with a browser.
View 6 Replies View RelatedI can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
View 1 Replies View RelatedBefore the latest update and with the latest update, after about one week, I cannot access the router wirelessly using 192.168.1.1. Using IE 10, Chrome, and FireFox all give me no response. I type in the address and the web page never changes. It keeps me at the home page of my browser. I do not get any errors or messages.
Also I tried to use the DHCP Reservation page, and the names of the devices will not allow spaces or any special characters. Sure would be nice to allow such.
I just noticed that my router reverted back to 1.1.28.146856. I have updated twice via the web browser to version 1.1.28.147876 and once via direct connection and the downloaded file, but the router keeps reverting back to the older firmware.
I am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.
View 5 Replies View RelatedWe have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. find the below dummy configuration.
resource-class SLB_STICKY
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 10.00 maximum equal-to-min
[Code].....
I have Windows xp professional 64 bit os and after installed sp 2 my internet browser don't connect to internet I can connect to skype..
View 4 Replies View RelatedI accidentally deleted my wireless adapter, so i re installed it in device manager, and now i can't connect to anything except my router, when i check internet options, it tells me that i'm connected to the internet. I can go on the internet on this other laptop and desktop computers, xbox and whatever else, just not the other laptop (it's an hp pavillion dv6000 btw)
View 1 Replies View RelatedI am experiencing the same problems except different setup. I use avg and spybot as my security.The problem is that I cannot use any browser be it firefox or chrome or IE. I can't even update my avg or spybot. I can type in my router and get that. I have a laptop, which I am using now, that is working fine with the internet. Even my 360 is able to connect so I can watch netflix.I have "flushed" the connection, I have used winsock, and macshift. I'm running AVG and Spybot with spybot coming back clean but I have a gut feeling it won't work.I have run sfc /scannow and there is some files missing. I inserted my original disk into the cd-rom and refuses to detect the cd after so many tries. I reset the router and computer several times. I tried running sfc /scannow in safe mode but didn't run[CODE]
View 11 Replies View RelatedI cannot get XP pro to connect to internet with any browser. It sees all of the other computers on the network and can ping any of the connection, including the router, but will not bring up any web pages.
View 1 Replies View RelatedI am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address.
View 2 Replies View RelatedI have the guest Access enabled on my E4200 but I can't get any of the apple devices or dell laptops to show the LOGIN screen in the web browser.
View 1 Replies View RelatedI've been trying to get into the web interface for my AG300.
I keep getting the "Problem Loading Page" dialogue - the address has not been changed from the default 192.268.1.1
So far I have tried it in Windows & Ubuntu, and in Firefox, Chromium and Explorer. I have sone a hard rest and rebooted it and the computer numerous times.
if I ping that address there is no result, but I obviously have internet access.