I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.
View 5 RepliesI am having trouble on setting up a WLC2100 ver 7. we need to implement a private and public network. private network authenticate to IAS - RADIUS (windows server 2003 server) while the public network is open but when a client connect to AP it will redirect to a 3rd party web athentication - HotSpot Server. the challenge is we want to broadcast a single SSID.
senario:
1. when a user/guest connect to the AP a radius server will authenticate thru IAS - Radius.
2. when a user is authenticate via radius a dhcp server will give an ip address of the private network.
3. if the user is not authenticate a dhcp server will give the public ip address and netowrk traffic must go to a different VLAN.
my question is, is it possible to broadcast a single SSID for the two network? is there a document which is related to our scenario?
In the near future my company is looking into the option of adding a second network connection (exclusively for customers visiting our facility) to our pre existing WLAN network. We are currently using a Cisco 2100 series Wireless LAN Controller and probably 6-8 APs. Our main connection is made up of 4 T1 lines and the second connection will more than likely be a cheap DSL connection. I'm wondering if this technology supports two separate connections on one controller and APs. For example, is there a way within the controller web interface to separate what is currently our "Guest" connection from the main Internet line? I was thinking of just plugging from the DSL router directly to the controller and save the hassle of changing routing and VLANs.
View 12 Replies View RelatedWe have 4 1142N LAPs that I want to divide between an internal wireless and a guest wireless network using the controller. Currently all of the APs are on an established internal network, but I want to migrate one over to a test guest network before buying more LAPs to augment the networks further. Currently the port connecting to the WCS from the 3560 switch is configured as an access port using VLAN 10. Whenever I make it a trunk port carrying VLAN 10 as well as the other ports we will be using for the guest and ap-manager networks, I lose connection with the controller. To me this implies that the port on the controller is configured as an access port as well. In the documentation I found for the controller it states that by default the ports are al configured to be trunks, but it appears as though something was changed by the previous tech. All of the APs are connected to other switches, not to the controller itself.
1) How can I get the port on the controller back to being a trunk port
2) Can I use the internal DHCP server for the guest network if the subnet is different than the management subnet, or will I have to use another external server and relay/proxy it through the controller to give guest clients IP addresses?
how to chance the web authentication certificte on WLAN 2100 controller. My users are complaining that they need to accept the security certificate before proceeding to the actual authentication?
View 4 Replies View RelatedI have a D Link WL-2100 AP, I connected my PC to AP with ethernet cable, then I tried to connect the AP to my wireless modem but I couldn't do.How can I make the AP recognize wireless modem?
View 2 Replies View RelatedI'm trying to test fast roaming using a Cisco 2100 Series controller and 2 1140 APs. The initial authentication succeeds fine and the wireless connection works ok using WPA2+CCKM and LEAP with a Cisco ACS radius server.The problem is that the client does not attempt to preauthenticate with the other AP because the RSN Capabilities IE in the AP beacons and probe responses do not set the RSN Preauthentication capable bit. I can't figure out what it takes to get the APs to indicate to clients that it can do preauthentication. I'm been crawling through all the documentation I can find, to no avail.
View 1 Replies View RelatedI am new to cisco products and I am trying to setup an aironet 1242ag. I have figured out the ip given to it but, cannot access it with a browser.
View 6 Replies View RelatedI have powered ON WLC(2100 Series) and connected LAN port from WLC to my PC. To access WLC GUI what is the factory default IP address?
I connected Console Port of WLC to Serial port of my PC. I have configured WLC as per the WLC quick guide.
Management Interface IP address :: 10.40.0.4
Management interface Net Mask: 255.255.255.0
[Code].....
The result is same even when below commands are used Configuration modeport adminmode all enablenetwork webmode enablenetwork secureweb enable
We have a building with 6 Cisco Airnet 1140 connected to a Cisco 2100 WLC, all tied into a nice Central Certificate server and a Win2008 NPS/Radius server on a Win2008 AD. Our trusted PC wireless access is fine, with domain laptops with certificates authenticating with DHCP all round the building. We use GP to apply settings to an AD integrated Proxy server for internet access.
The problem I now have is with guest access...
We are an education establishment, so students could turn up with anything from a laptop to an iPad to an Android phone, which immediately rules out using proxy PAC files to configure the proxy.
What I really want is a method of using the radius to verify the guest user against their existing AD user account, which I believe is possible. The one snag we have is in order to avoid the user having to configure the Internet proxy we would have to switch it to a transparent mode, which immediately restricts our ability to report on AD username, we would only have an IP address to report on, which is next to useless!
We've looked at a Gateway product (Astaro), which integrates the Filtering onto the Gateway, but the downside is that you have to use their APs, so we would be replicating existing work, whilst also managing two filters.
I can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
View 1 Replies View RelatedBefore the latest update and with the latest update, after about one week, I cannot access the router wirelessly using 192.168.1.1. Using IE 10, Chrome, and FireFox all give me no response. I type in the address and the web page never changes. It keeps me at the home page of my browser. I do not get any errors or messages.
Also I tried to use the DHCP Reservation page, and the names of the devices will not allow spaces or any special characters. Sure would be nice to allow such.
I just noticed that my router reverted back to 1.1.28.146856. I have updated twice via the web browser to version 1.1.28.147876 and once via direct connection and the downloaded file, but the router keeps reverting back to the older firmware.
I have configued Cisco LAP 1242AG with statis IP.I have connected LAP to WLC.I am able to ping WLC management interface IP Address from LAP's console.LAP is failed to Join WLC with error "Could not resolve CISCO-SAPWAP-CONTROLLER"
View 3 Replies View RelatedI am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address.
View 2 Replies View RelatedI have the guest Access enabled on my E4200 but I can't get any of the apple devices or dell laptops to show the LOGIN screen in the web browser.
View 1 Replies View RelatedI have the wireless guest access set up in my E4200 flash to the latest firmware. When I connect to the wireless guest network it comes up under the 192.168.33.xx IP address. I can connect fine but it never pops up the browser so that you can type in the guest password. I'm running Windows 7 but I've also noticed the exact same problem under XP.The only thing I can guess is the problem is that I have this acting like an access point and all DHCP requests go to my router. I've basically turned off DHCP on this and plugged the network connection into the switch on the back.
View 3 Replies View RelatedI'm trying to access the browser based utility (@ http://192.168.1.1) on my router and having no luck. I've tried from two different computers (each Win 7) and each browser. I've tried wired directly to the blue/LAN ports and through Wifi. I've confimred that the IP is correct (or is at least the default gateway for each machine). The Cisco Connect tool can't find the router either.the only thing that can find the router is the CiscoConnect Express app on my iPhone.Internet is working fineish (some problems with Wifi), I just want to play with some settings.
View 1 Replies View RelatedI've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedI have intel Atom system, i installed windows xp sp2,i connected to internet but my browser doesnt works, i checked my modem, cable all are working fine then i pinged my ip in cmd and default gateway and website they are ping perfectly but i cant browse in ie, firefox,Even i replaced operating system but it doesn't work.
View 2 Replies View RelatedThe other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...
View 1 Replies View RelatedI am trying to set up a minecraft server but I am having trouble port forwarding. I port forwarded a linksysWRT160v3 router but still nobody could connect. So I read online that I might have to also port forward something sitting next to my router. (IDK what it is, i think its a modem or something) It is a Efficient Simon Speed Stream 5100. It says to type in 192.168.0.1 in my web browser for advanced setup but when I did it took me to a search engine.
View 3 Replies View RelatedI have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.
View 1 Replies View RelatedI have 2 PC's on a LAN, both Windows 7 Ultimate. Both PC's is connected to the same router via ethernet.Now PC number two has internet access and works great, but PC number 1 also shows "Internet Access" in the system tray and also in the network map, it shows that it is connected to the internet. But when I open ANY browser(FF, IE, Chrome) it cannot connect to the internet. Skype also cannot connect. As I said, the other PC (PC2) can connect fine and has the exact same setup as PC1. However, on PC1, when I manually connect via a dial-up broadband connection using the SAME username and password to my ISP as I used in the router config, it connects. The problem is that it loses the connection every 2 minutes or so...(failed to connect...redialing...). What I can do on PC1 to make it connect to the internet via the router the same way the other PC does?
Also, the two PC connects fine over the LAN between each other, but as I said, PC 1 cannot connect to the WAN the same way PC2 does. Things I tried: I did a TCP/IP stack repair and rebooted. Nothing. I disconnected the 'working PC' from the LAN, nothing. I uninstalled the Antivirus and Firewall, nothing...
Router: Siemens Giga 762SX
Network adapter on PC1: Realtek RTL8139/810x Family Fast Ethernet NIC. I do have the latest drivers installed
I am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
We have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. find the below dummy configuration.
resource-class SLB_STICKY
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 10.00 maximum equal-to-min
[Code].....
I have been using this wireless internet connection for a long time, but the other day I went to go online, it didn't work. Ive tried lots of things but nothing seems to work.I'm able to acess the same wifi from my phone and it works fine, so i know its not the actual network, its something on my side.pics of xirrus screenshot & intel proset config attached[CODE]
View 11 Replies View RelatedJust set up a ClearOS gateway - internet works, DNS everything OK.I can ping the two routers (set up as switches) but i cannot access them via the browser from my PC (CYLON). I CAN access ClearOS panel from my PC?
View 1 Replies View RelatedIs there anyway that I can access Remote access my computers via the internet browser.
View 4 Replies View RelatedI recently had a vendor configure our 2 firewalls (ASA5520). We are replacing a active-failover PIX525 firewall in 2 locations. After the vendor configured the new ASA5520's, I was unable to access the ASDM. The configurations are a basically modified versions of the config on the PIX525. I did find that they did not set the ASDM image path. [code]
I have tried from my browser as well as downloading and installing th ASDM on my computer.
I upgraded a Catalyst 2950 switch and there wasn't enough room so I deleted the flash. The upgraded went well using tftp. It booted up fine. The I0S version includes crypto. But, I can't access switch via web browser or CNA. Port scan shows port 80 0pen. What am I missing?
Here is the flash.
Directory of flash:/
2 -rwx 112 Mar 01 1993 01:00:48 +00:00 info 3 -rwx 3722814 Mar 01 1993 01:02:58 +00:00 c2950-i6k2l2q4-mz.121-22.EA14.bin 4 drwx 4416 Mar 01 1993 01:03:45 +00:00 html 331 -rwx 112 Mar 01 1993 01:04:19 +00:00 info.ver 332 -rwx [code]....
I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies View RelatedI run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View RelatedIs there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
View 3 Replies View Related