PC Has Internet Access But Browser Will Not Connect?
Jun 2, 2012
I have 2 PC's on a LAN, both Windows 7 Ultimate. Both PC's is connected to the same router via ethernet.Now PC number two has internet access and works great, but PC number 1 also shows "Internet Access" in the system tray and also in the network map, it shows that it is connected to the internet. But when I open ANY browser(FF, IE, Chrome) it cannot connect to the internet. Skype also cannot connect. As I said, the other PC (PC2) can connect fine and has the exact same setup as PC1. However, on PC1, when I manually connect via a dial-up broadband connection using the SAME username and password to my ISP as I used in the router config, it connects. The problem is that it loses the connection every 2 minutes or so...(failed to connect...redialing...). What I can do on PC1 to make it connect to the internet via the router the same way the other PC does?
Also, the two PC connects fine over the LAN between each other, but as I said, PC 1 cannot connect to the WAN the same way PC2 does. Things I tried: I did a TCP/IP stack repair and rebooted. Nothing. I disconnected the 'working PC' from the LAN, nothing. I uninstalled the Antivirus and Firewall, nothing...
Router: Siemens Giga 762SX
Network adapter on PC1: Realtek RTL8139/810x Family Fast Ethernet NIC. I do have the latest drivers installed
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
I have intel Atom system, i installed windows xp sp2,i connected to internet but my browser doesnt works, i checked my modem, cable all are working fine then i pinged my ip in cmd and default gateway and website they are ping perfectly but i cant browse in ie, firefox,Even i replaced operating system but it doesn't work.
The other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...
I have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.
I accidentally deleted my wireless adapter, so i re installed it in device manager, and now i can't connect to anything except my router, when i check internet options, it tells me that i'm connected to the internet. I can go on the internet on this other laptop and desktop computers, xbox and whatever else, just not the other laptop (it's an hp pavillion dv6000 btw)
I am experiencing the same problems except different setup. I use avg and spybot as my security.The problem is that I cannot use any browser be it firefox or chrome or IE. I can't even update my avg or spybot. I can type in my router and get that. I have a laptop, which I am using now, that is working fine with the internet. Even my 360 is able to connect so I can watch netflix.I have "flushed" the connection, I have used winsock, and macshift. I'm running AVG and Spybot with spybot coming back clean but I have a gut feeling it won't work.I have run sfc /scannow and there is some files missing. I inserted my original disk into the cd-rom and refuses to detect the cd after so many tries. I reset the router and computer several times. I tried running sfc /scannow in safe mode but didn't run[CODE]
I cannot get XP pro to connect to internet with any browser. It sees all of the other computers on the network and can ping any of the connection, including the router, but will not bring up any web pages.
I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
Is there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
I am trying to set up a minecraft server but I am having trouble port forwarding. I port forwarded a linksysWRT160v3 router but still nobody could connect. So I read online that I might have to also port forward something sitting next to my router. (IDK what it is, i think its a modem or something) It is a Efficient Simon Speed Stream 5100. It says to type in 192.168.0.1 in my web browser for advanced setup but when I did it took me to a search engine.
I have been using this wireless internet connection for a long time, but the other day I went to go online, it didn't work. Ive tried lots of things but nothing seems to work.I'm able to acess the same wifi from my phone and it works fine, so i know its not the actual network, its something on my side.pics of xirrus screenshot & intel proset config attached[CODE]
Just set up a ClearOS gateway - internet works, DNS everything OK.I can ping the two routers (set up as switches) but i cannot access them via the browser from my PC (CYLON). I CAN access ClearOS panel from my PC?
I have the wireless connection working and when I try to browse information on the any browser like Firefox, Internet Explorer, Chrome, Opera and all but it cannot connect.It display a message saying "Connection closed by the remote server" in Opera and in other browser it doesn't display anything even after several times of refresh.I also tried restarting the system and it connect the home page of the browser and when I open the link in new tab it doesn't go to that link.
New windows 8 pc which can't connect to an internal ip (inside address 192.168.1.237) through browser, either firefox or IE. I use this address to open a webdav session on browser to transfer files form pc to iphone, or vice versa, using ipphoone app Files Pro. I have no problem connecting on this using my old windows xp pc using ie, which is in another room. Both pcs used my fairly new ASUS ac router. Is there a windows8 firewall or toehr exception list that I need to modify on the windows 8 (HP) laptop?
I can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
Before the latest update and with the latest update, after about one week, I cannot access the router wirelessly using 192.168.1.1. Using IE 10, Chrome, and FireFox all give me no response. I type in the address and the web page never changes. It keeps me at the home page of my browser. I do not get any errors or messages.
Also I tried to use the DHCP Reservation page, and the names of the devices will not allow spaces or any special characters. Sure would be nice to allow such.
I just noticed that my router reverted back to 1.1.28.146856. I have updated twice via the web browser to version 1.1.28.147876 and once via direct connection and the downloaded file, but the router keeps reverting back to the older firmware.
I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.
We have 4710 ACE in our network and currently we are using software version A3 2.0.
Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. find the below dummy configuration.
resource-class SLB_STICKY limit-resource all minimum 0.00 maximum unlimited limit-resource sticky minimum 10.00 maximum equal-to-min
I am in kuwait and I have a CCTV camera in Philippines. It is setup with IP 112.200.216.88:3130. I can ping it but I am unable to connect through browser. I am working behind a router. Anything I need to do on my network in Kuwait to be able to connect to it?
I am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address.
I've been trying to get into the web interface for my AG300.
I keep getting the "Problem Loading Page" dialogue - the address has not been changed from the default 192.268.1.1
So far I have tried it in Windows & Ubuntu, and in Firefox, Chromium and Explorer. I have sone a hard rest and rebooted it and the computer numerous times.
if I ping that address there is no result, but I obviously have internet access.
I recently had a vendor configure our 2 firewalls (ASA5520). We are replacing a active-failover PIX525 firewall in 2 locations. After the vendor configured the new ASA5520's, I was unable to access the ASDM. The configurations are a basically modified versions of the config on the PIX525. I did find that they did not set the ASDM image path. [code]
I have tried from my browser as well as downloading and installing th ASDM on my computer.
I upgraded a Catalyst 2950 switch and there wasn't enough room so I deleted the flash. The upgraded went well using tftp. It booted up fine. The I0S version includes crypto. But, I can't access switch via web browser or CNA. Port scan shows port 80 0pen. What am I missing?
Here is the flash. Directory of flash:/ 2 -rwx 112 Mar 01 1993 01:00:48 +00:00 info 3 -rwx 3722814 Mar 01 1993 01:02:58 +00:00 c2950-i6k2l2q4-mz.121-22.EA14.bin 4 drwx 4416 Mar 01 1993 01:03:45 +00:00 html 331 -rwx 112 Mar 01 1993 01:04:19 +00:00 info.ver 332 -rwx [code]....
In the company I work for, employees' internet traffic is monitored, and if you download too much, you get a warning, and later there might be more serious consequences. But they don't tell how many kilobytes are too much, and they also don't tell, how much of your "kilobyte budget" you have spent already. So I want to be able to monitor my own internet activity. However, all the programs I found so far watch the whole traffic going through the network card, which, beside the internet usage, includes LAN and mail server communication, which don't count. So, I'm looking for a free portable program that can monitor specifically my browser's internet usage, i.e. the number of kilobytes sent and received by the browser application. It is imperative that the program should be portable, or at least installable without administrator privileges, because I don't have that.
My daughters laptop is having tones of trouble connecting to the net. All browsers are giving me same "Can't connect" messages but automatic updates and stuff seem to be ok.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft� Windows Vista� Home Basic , Service Pack 1, 32 bit Processor: AMD Athlon(tm) Processor 2650e, x64 Family 15 Model 127 Stepping 2
