I accidentally deleted my wireless adapter, so i re installed it in device manager, and now i can't connect to anything except my router, when i check internet options, it tells me that i'm connected to the internet. I can go on the internet on this other laptop and desktop computers, xbox and whatever else, just not the other laptop (it's an hp pavillion dv6000 btw)
View 1 RepliesI am experiencing the same problems except different setup. I use avg and spybot as my security.The problem is that I cannot use any browser be it firefox or chrome or IE. I can't even update my avg or spybot. I can type in my router and get that. I have a laptop, which I am using now, that is working fine with the internet. Even my 360 is able to connect so I can watch netflix.I have "flushed" the connection, I have used winsock, and macshift. I'm running AVG and Spybot with spybot coming back clean but I have a gut feeling it won't work.I have run sfc /scannow and there is some files missing. I inserted my original disk into the cd-rom and refuses to detect the cd after so many tries. I reset the router and computer several times. I tried running sfc /scannow in safe mode but didn't run[CODE]
View 11 Replies View RelatedI cannot get XP pro to connect to internet with any browser. It sees all of the other computers on the network and can ping any of the connection, including the router, but will not bring up any web pages.
View 1 Replies View RelatedI have 2 PC's on a LAN, both Windows 7 Ultimate. Both PC's is connected to the same router via ethernet.Now PC number two has internet access and works great, but PC number 1 also shows "Internet Access" in the system tray and also in the network map, it shows that it is connected to the internet. But when I open ANY browser(FF, IE, Chrome) it cannot connect to the internet. Skype also cannot connect. As I said, the other PC (PC2) can connect fine and has the exact same setup as PC1. However, on PC1, when I manually connect via a dial-up broadband connection using the SAME username and password to my ISP as I used in the router config, it connects. The problem is that it loses the connection every 2 minutes or so...(failed to connect...redialing...). What I can do on PC1 to make it connect to the internet via the router the same way the other PC does?
Also, the two PC connects fine over the LAN between each other, but as I said, PC 1 cannot connect to the WAN the same way PC2 does. Things I tried: I did a TCP/IP stack repair and rebooted. Nothing. I disconnected the 'working PC' from the LAN, nothing. I uninstalled the Antivirus and Firewall, nothing...
Router: Siemens Giga 762SX
Network adapter on PC1: Realtek RTL8139/810x Family Fast Ethernet NIC. I do have the latest drivers installed
I have Windows xp professional 64 bit os and after installed sp 2 my internet browser don't connect to internet I can connect to skype..
View 4 Replies View RelatedI have the wireless connection working and when I try to browse information on the any browser like Firefox, Internet Explorer, Chrome, Opera and all but it cannot connect.It display a message saying "Connection closed by the remote server" in Opera and in other browser it doesn't display anything even after several times of refresh.I also tried restarting the system and it connect the home page of the browser and when I open the link in new tab it doesn't go to that link.
View 1 Replies View RelatedNew windows 8 pc which can't connect to an internal ip (inside address 192.168.1.237) through browser, either firefox or IE. I use this address to open a webdav session on browser to transfer files form pc to iphone, or vice versa, using ipphoone app Files Pro. I have no problem connecting on this using my old windows xp pc using ie, which is in another room. Both pcs used my fairly new ASUS ac router. Is there a windows8 firewall or toehr exception list that I need to modify on the windows 8 (HP) laptop?
View 1 Replies View RelatedI have intel Atom system, i installed windows xp sp2,i connected to internet but my browser doesnt works, i checked my modem, cable all are working fine then i pinged my ip in cmd and default gateway and website they are ping perfectly but i cant browse in ie, firefox,Even i replaced operating system but it doesn't work.
View 2 Replies View RelatedI am in kuwait and I have a CCTV camera in Philippines. It is setup with IP 112.200.216.88:3130. I can ping it but I am unable to connect through browser. I am working behind a router. Anything I need to do on my network in Kuwait to be able to connect to it?
View 2 Replies View RelatedThe other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...
View 1 Replies View RelatedIn the company I work for, employees' internet traffic is monitored, and if you download too much, you get a warning, and later there might be more serious consequences. But they don't tell how many kilobytes are too much, and they also don't tell, how much of your "kilobyte budget" you have spent already. So I want to be able to monitor my own internet activity. However, all the programs I found so far watch the whole traffic going through the network card, which, beside the internet usage, includes LAN and mail server communication, which don't count. So, I'm looking for a free portable program that can monitor specifically my browser's internet usage, i.e. the number of kilobytes sent and received by the browser application. It is imperative that the program should be portable, or at least installable without administrator privileges, because I don't have that.
View 2 Replies View RelatedMy daughters laptop is having tones of trouble connecting to the net. All browsers are giving me same "Can't connect" messages but automatic updates and stuff seem to be ok.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Basic , Service Pack 1, 32 bit
Processor: AMD Athlon(tm) Processor 2650e, x64 Family 15 Model 127 Stepping 2
[Code].....
i already have net running on my default browser firefox.but i want the net to run on my other browser chrome........
View 2 Replies View RelatedI have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.
View 1 Replies View RelatedI work in a small school and recently we started to have a problem with browsing the internet. We don't have an 'IT Department' as such as I'm the closest thing to it.When a browser is opened it will not connect to the homepage, or if it does its generally from cache, instead an error message about not being able to connect to server will appear. Now if you hit refresh you might or might not connect to the webpage in question but you can gurantee that it will take a long time to make that connection even on an undemanding site like wikipedia.The odd thing is that when connected to a speed checker it gives no surprising results, speed is normal. Also when downloading a file or the latest linux live distribution torrent I can achieve maximum speeds available to us.We use a selecction of Macs & PCs mostly connecting through ethernet cabling although connecting wirelessly is no different. We use BT 2Wire 2700HGV Business Hubs. I can't think of any changes our end that have happened to cause this and our internal network connections run just fine. I have tried pinging from the command line and it looks ok to my limited expertise, no lost packets.
View 3 Replies View RelatedI recently am trying to get an open nat type so I can play Playstation network better. I watched a video and they told me to turn off the NAT and I did now it does not let me connect to the router page now, I can connect to the internet and stuff but I can't connect to the router page
View 19 Replies View Relatedi am not able to use the internet explorer browser to connect to the internet it may be connected to my installing of the adobe flash player that a site said that i needed .
View 1 Replies View RelatedI'm trying to portforward for a game, and in order to do so, I'm setting up a static IP. I've portforwarded in the past and all's been fine, but when I'm trying to set a static IP now it allows me to portforward and host the game, but whenever I try to log into any sort of website, it cannot find the page. The only fix to this is to allow it to obtain the IP address automatically. I've had a static IP in the past and yet I've never run into this issue before.
When I go to my TCP/IPV4 settings under the properties of my selected internet connection, I open up my ipconfig(I'll post it below) and select "Use the Following Ip Address". I then input 192.168.1.73, to change it to that.
Then, I click on the subnet mask box and it auto-fills 255.255.255.0, which is listed under ipconfig anyways, and for default gateway I input 192.168.1.1. I leave the DNS server boxes blank because it doesn't list them under ipconfig and it's what I did in the past to achieve the same results. After I click OK, the issue I listed above begins.
Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Tim-PC
Primary Dns Suffix . . . . . . . :
[Code].....
Is there anyway that I can access Remote access my computers via the internet browser.
View 4 Replies View RelatedNot sure how I got here, but I cannot now connect to the E3000 using the Browser Utility. USing https://10.x.x.x, shows certificate warning page, then when I continue "Internet Explorer cannot display the webpage".DId NOT change the host hame.Last time I used the Browser Utility (weeks ago) was to disable the wireless to check something. Reenabled the wireless, no apparent problems until today when I tried to access via the Browser Utility.As I never ran Connect, there are no settings to change, and now it cannot detect the device.I guess I'll wait until I HAVE to change something, and do a 30-30-30 reset.
View 1 Replies View RelatedI just got myself a Cisco RV220W, connected my laptop to configure it. I receive an IP adress by DHCP (192.168.1.x) and can ping the router (192.168.1.1). However, when I try to connect to the router by the web interface, I receive this message in my browser (Chrome):
The webpage at https://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 113 (net::ERR_SSL_VERSION_OR_CIPHER_MISMATCH): Unknown error.
In FireFox: Secure Connection Failed An error occurred during a connection to 192.168.1.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
In IE9: I get no error message, the page never loads
Is it DoA or how to get connected to the web interface?
I am tryign to set up an Aironet 1142, I have created a reserrvation in DHCP using the MAC address, and the reservation shows as active, but I cannot connect to the device with my browser.
View 1 Replies View RelatedI am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies View RelatedShe has an older HP Vista laptop that connects to the internet just fine (including downloading updates, connecting to messenger clients, etc.), but it will not connect to any of her browsers...
1. I understand firewalls can throw huge issues, I am pretty sure this is where the problem lies. She was using Ad-aware and I am pretty sure that the window that popped up that she clicked switched her firewall settings back to default and left something weird in the system. When I try to disable Windows firewall and go back to Ad-aware it won't let me exit snooze. It asks if I confirm and when I do nothing happens.
2. I have done a winsock reset and made sure that the proxy boxes are unchecked to make sure there isn't a proxy problem.
3. The ipconfig/reset threw no errors, everything looks fine.
4. No hardware conflicts or errors reported in device manager and all drivers are up to date. Again since the internet is actually working minus the browser I don't think it is a hardware issue.
5. No virus detected. Symantec is loaded on the laptop did a run with that, also have AVG that I installed and ran (disabled one and did the other, never run simultaneously). AVG is now uninstalled as Symantec is disabled to avoid any conflict with AdAware.
Is there any way to completely disable all firewalls, remove any settings or registries (if any), and start from scratch with it? Also, as networking is by far my weak point, is there anything I need to check as far as the DNS is concerned?
Not too much networking savvy - but here goes. Want to use router as local lan - no wireless. When router is connected to laptop via RJ45 I loose my ability to connect to sites via browser. IPconfig shows wireless adapter at 192.168.1.3. When router is attached it's ip is 192.168.1.1. Disabled the wireless in the settings but no dice. When the router was used with DSL it was set at PPPoE but now that I'm just using it locally not sure whether it should be DHCP or Static or other.
View 3 Replies View RelatedI just purchased a E4200 and I have some questions;
1. I have the hardware version 1, and I noticed the hardware version 2 has a newer version of Cisco Connect. Can I use the newer version of Cisco Connect on my E4200 V1?
2. Is there a way to hide passwords in Cisco Connect and in the browser UI for the router?
3. Is there a way to have a separate admin password and wireless password?
I also have a issue, I want the browser web UI to display in english, but it insists on changing it back to my native language from time to time.
I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View RelatedIs there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
View 3 Replies View RelatedI have a Studio XPS 8100 desktop. Lately, I'd say for about the past 3 months, after I start up my computer, I open my mail (windows live) and I open an internet browser, either "IE" or "Firefox"... Mail opens and receives no problem... my internet connection is fine... (have trouble shot all of that), but the internet will not open... It looks like it is going to start, then nothing... no message, not a thing. So I reboot and it opens... very odd no rhyme of reason for it, simply works fine one day and not another... I can't find any info. on the internet about this problem and no one I know has ever heard of it... Yes, I've run all the scans and checks with no viruses/spam, etc. detected... I'm using AVG free and Malawarebytes... was using Windows Security Essentials when is started... I have also scanned the computer in safe mode and no problems detected.
View 4 Replies View RelatedThe Lg840g is a tracfone with wifi capability. I get strong wifi signal and connection at home, but receive failure to connect to requested host message when I open the browser. This phone works at wayport wifi, so I assume it's a compatibility problem with the router. Is there a fix? (Router works great with our Acer and Kindle tablets though.)
View 1 Replies View RelatedI've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedIt started when I couldn't connect to a specific website for 2 days. I had to change my IP to get on again, and when I did I got a message from the admin saying that I had been blocked automatically because my browser was using upwards of 200 connections at a time. He made me check all the browser settings for it, and everything was still set at default. I didn't download any program or add-on, I did nothing special. It started out of the blue. I did virus scans, I reinstalled firefox and opera (the browsers I use). At this point I have no clue what the problem is.
View 4 Replies View RelatedSince downloading constant guard and Norton on my computer, I can connect to a wireless router but cannot open a web browser. My network diagnostics says could not make HTTP/HTTPS/FTP connection.I have tried many different things. IP configuration is correct. It will ping out to the internet and receive back without a problem.
View 8 Replies View Related