URL Wireless_U313
this person doesn't have a wireless router. She has the above, just a USB stick. there is no cable or DSL modem, no router, nothing, just that LTE stick.
So, can a Wi Fi printer be able to connect to her computer via that little LTE stick?
I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies View RelatedRegion : Vietnam
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
Everything seems so good until I setting up the printer server. Resources CD contains the "USB Print Service Client Setup" but the User Guide said that I have to install "TP-LINK USB Printer Controller Setup". First, I tried to install "USB Print Service Client Setup", nothing change but a small icon in taskbar allow me to start and stop service, no dialog box said me how to install printer driver. I look in tp-link website and get "TP-LINK USB Printer Controller Setup", install it but it can not detect my printer. What should I do now because I cannot uninstall "USB Print Service Client Setup"?
Just purchased new N750 model EA3500-NP and everything went ok until I tried to get my HP Laser Jet P2035n online. No go! It worked fine on the D-Link via Ethernet connection.
View 4 Replies View RelatedI have managed to install a printer on my computer using the USB port on the E4200 router.I'm just wondering is it now possible to install this printer on other computers / laptops.I'm not really sure how the printer is assigned. Is there some network share I can connect to?
View 8 Replies View Relatedmy home network is of 2 wired computers and one wireless computer (this one) whats strange is that even though i have internet access, I am unable to see any of the shared folders on the wired computers even though the wired computers can see each others shared folders and the shared folders on the wireless one.what im trying to do is connect to a printer, the wireless one preferably,but i can settle for the one thats directly connected to one of the wired computers if i could. i think this strange network blindness on my side might be part of the problem. this wireless one is a xp, the one with the direct printer is a vista, not sure on the last one, im thinking xp, but if xp doesnt have a 64 bit version, then i would guess 7.
View 4 Replies View RelatedI use wifi to connect to the Internet so I don't have a modem. Is there any kind of router system or any thing I can use to connect my printer to my computer with out using a cord
View 2 Replies View RelatedI am tryng to install a printer wireless and my computer isn't communicating with the printer, although its connected to the router.
View 1 Replies View RelatedCan i use awireles printer on a computer with no wireless card?
View 1 Replies View RelatedI cannot re-install my network printer via the USR web-print server at the URL identified by my USR5461 router page in Win XP SP3 even though it has worked for years. When I try to type in or cut & paste insert the URL for the web print server per USR's instructions, from the router home page, I get an error message that the printer was not found (even if I cut and paste the URL directly from my router's setup home page). The router home page indicates the printer status is "ready". In all other respects the router works fine for home networking and internet.I suspect I may have to manually set up an internet port for the printer but don't know how to do that in XP apparently.
View 3 Replies View RelatedI'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
I was having trouble getting printer to work properly-having to reboot each time to print.Uninstalled and re-installed printer software. Now computer not picking up printer wireless info.Tried using wireless configuration tool.Can't get past start to enter correct information in.Could computer picked up an other wireless router in area - not the correct one - and this infor. has locked me out. How do I get correct information in.
View 2 Replies View RelatedI am running a computer with Windows 7 Service pack 1 64 bit OS and I'm trying to install a wireless Canon MX420 printer.My computer is connected to my router through an ethernet cord and I have managed to set up my printer's wifi just fine. It appears connected on the printer's screen and I have disabled all firewalls on my computer yet it still won't detect it.
View 9 Replies View RelatedMy father gave us an old Gateway computer for the kids to use for homework. We have a Kodak ESP Office 2170 series wireless printer. How can we connect the 2, so they can print their homework out? I've downloaded the software but it won't detect or connect. Is the only way to use the printer , a USB cord?
View 1 Replies View RelatedI need the ssid or network name to install a printer, and apparently you can find it on the router's setup page. I have a Sagem@Fast 800 E3 - where do I find the setup page?
View 1 Replies View RelatedI cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
View 1 Replies View Relatedjust bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies View Relatedhow can i install VPN on my computer?
View 1 Replies View RelatedLong story short, I have a Asus CG5270 desktop with a cdrom that DOES NOT work and a hard drive that is totally wiped clean of any operating system. I also have a router and a perfectly working laptop with Windows 7 64bit home premium on it. I do not have a crossover cable or external hard drive. I have the recovery disk for the desktop which is Vista 64bit home premium SP1.Can I or can I not use the laptop to reinstall Vista on my desktop?I've found this question asked countless times in countless forums but also countless answers that do not answer the question for a person that is not a computer engineer.
View 2 Replies View RelatedThat is: that I have a slow general storage drive that is becoming full. A fast HDD for recording onto with fraps and for programs that I won't use with fraps. I then have an SSD as my main drive which gets VERY full VERY quickly. I then have another computer that has a pretty quick 1TB RAID 0 running and a gigabit network, the network being the bottleneck but still pretty damn quick (120MB/s which is plenty fast enough).
Now, what I intend to do is have my storage drive stay as is; my fraps drive to continue it's job, and then for my old computer to store my big programs to run off, things like games. Is it possible to do this as when I've tried it says I don't have permission even though I gave access to the whole HDD from the network. (I'm installing on this computer but changing to the mapped network drive for the install directory).
I have a Linksys WRT54G to which 2 computers are connected of which one has no problems at all.The other computer just had its hard drive replaced and Windows XP Pro SP1 installed on the new hard drive. With the new operating system, I cannot get the computer to access the router. The connection status reports that the network device is working but IPCONFIG /ALL reports nothing (blank). The NIC is onboard the motherboard (ASUS P5LP-LE). I have swapped out cable ports at the router and tried a different cable to the faulty computer to no avail. If I had a spare NIC I would already have tried that too. FYI, it was working without problems prior to the hard drive crash that prompted the new drive and OS install.I tried a wireless USB network interface (Zonet ZEW2508) and the computer also reports it working. However, the network icon continually cycles between connected and unavailable, about 6 seconds connected and 1 second unavailable. IPCONFIG also reports blank on this.
View 11 Replies View RelatedTrying to install an E1200 inside a PPOE modem. I put in the account and password in the PPOE settings. I can see that it connects okay. But, my clients connected to the router (whether wired or wireless), do not get authenticated, so I can't get anywhere with them. Should I make the modem be the source of DHCP?
View 5 Replies View RelatedUnable to find the printer I am sharing on wifi on my home network !!
View 4 Replies View RelatedToday when I tried to add a network printer,list of browsed printers in network is shown as pc1/hplaser1, pc1/hplaser2, pc2/hplaser1, pc7/hplaser1 and so on. They are all network printers, not local printers.Then why it is not showing the printers alone, why they show the pcs in the network and the same printer is shown in different pcs as they are installed in all of them.
View 2 Replies View RelatedI need to connect my hp printer to my computer but I do not now my network security key. My network is WPA I think.
View 1 Replies View RelatedI'm trying to add a printer back to my laptop. I've had to do this several times because our internet drops a lot.This time for some reason I can't add the wireless printer back to my laptop. When I add the printer it finds it but then it can't establish the tcp/ip connection.My workstation at the house can print to the wireless printer with no problem.
View 2 Replies View RelatedI need my network password to set up my printer with my computer
View 1 Replies View RelatedUntil recently my Windows 7 has communicated with my Lexmark Pro 900 series
View 1 Replies View RelatedIs there any way to add a printer to my computer that is on a completely different network? It's a small residential setup on both ends.
View 2 Replies View Relatedi have 2 printer one is connected through usb, i want to connect one more printer through lan using switch....how to connect?
View 3 Replies View Relatedi cant share my hp (laserjet3050series pcl 6) printer with my computer
View 1 Replies View RelatedI just installed Tomato firmware (details below) on my wireless-N router and everything appears to be working fine on the router's end. I can connect to the Internet properly with a wired (Ethernet) connection; in fact, that's how I posted this question.
What I cannot do is connect to the router wirelessly in any way. At first, I thought that something was wrong with my wireless security settings, because I read about some incompatibilities between Windows 7 and AES encryption. However, when I changed to TKIP, the issue persisted; when I switched from WPA2 Personal to WEP, the issue persisted; and when I disabled wireless security entirely — just for testing purposes — the issue still persisted.
My Internet search for this issue brought up a lot of old forum and mailing list posts, most of which were useless. The only one that seemed promising suggested disabling Afterburner, but that came disabled by default on my install. I did try enabling it and then disabling it, but it had no apparent effect.
In case it's relevant: before I installed Tomato, I had a somewhat funky install of dd-wrt on the router. The first thing I did after installing Tomato was a full clean of the nvram through the web GUI's Administration → Configuration → Restore Default Configuration menu.
What do I have to do to get wireless running? I only have one computer available at the moment, but I'll try to update later if and when I can borrow more devices for testing.
Assorted specs:
Linksys WRT160N v3
Tomato Firmware v1.28.9054 MIPSR2-beta K26 Mini
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates
EDIT:This is a computer issue, not a router issue. Two smartphones with wi-fi connections and another computer are all able to connect to the wireless network with no problems. However, the original computer was able to connect to the same router just fine before Tomato was installed. It has an internal wireless-B/G card, and I had Tomato set up to broadcast G-only, so it should have been compatible.
EDIT 2:The computer in question was the only device in the house that wasn't set up for wireless-N, so I went out and bought a Wireless-N USB adapter and changed Tomato to be N-only. Using the new adapter, I get connection again. I suppose it's possible that the computer's OEM internal wireless card failed at exactly the same time that I installed Tomato on the router, but that would be one heck of a coincidence. I'll see if I can connect to some other G or B network next time I'm around one....
I have a HP office jet 40vi printer that for the past several years has been connected to an XP networked computer and it has been shared for printing with other computers in my classroom. This summer the computer was switched with another XP networked computer.I installed the printer using the disk to the new computer, but I am unable to get the computer shared. When I try to share it and list it in the directory I get the following pop-up: Printer settings could not be saved.Operation could not be completed.
View 7 Replies View Related