Just purchased new N750 model EA3500-NP and everything went ok until I tried to get my HP Laser Jet P2035n online. No go! It worked fine on the D-Link via Ethernet connection.
View 4 Replies
I am unable to connect a printer using the USB port on my new Linksys EA3500 router.
I followed the directions here: Support Page , but my verison of Cisco Connect does not have the option to "connect a USB printer".
I am on a macbook pro running OSX 10.7.4 and my verison of Cisco Connect is 1.4 (12005.2). My router's firmware version is 1.0.30.126544. A screenshot of what I see after clicking "add a device" in Cisco Connect is below. The printer is an HP DeskJet F4280.
I've recently purchases a Canon MF3010 Multifunction printer, and connected this to my EA3500 router's USB port. Used Cisco Connect to setup the printer, and the print function is working fine.
The issue is with the scan function. It appears the default functionality of the router is to only activate the connection to the printer when a print job is fired off. When this connection is active, the scan functionality works fine.
Another way to activate the connection to the printer to allow for scanning would be to go through
Cisco Connect>Computers and devices>PrinterWhile the process is running (searching for printer), the connection is active as well, and scanning works fine. When the process is closed, scanning no longer works, with an error message stating that communication to the printer cannot be established.
Is there a simpler way to keep the connection to the printer active, or some sort of configuration to automatically establish this connection for scanning?
I just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies View RelatedJust upgraded to the EA3500 router and realized my wireless printer can not handle the 5ghz band.If I have the pc on the 5 ghz and the printer on the 2.4 they won't communicate correct?
View 2 Replies View RelatedI recently bought EA3500 router. I am not able to hook up 2 storage external HDD and 1 USB printer usnig the router.I am connecting all 3 to a USB hub which i am connecting to the router.
View 1 Replies View RelatedI was wondering if the EA3500 would support splitting the USB (buying a USB tree) to allow for both a printer and hard drive to connect at the same time?
View 1 Replies View RelatedMy 2.4 GHz is not working corrently on my EA3500 router. I have no trouble with my 5 GHz which I am currently on. On my iPhone I have to manually click the network even though it is known and then the wifi icon lights up full then goes dim then just flashes til it gives up. If I try connecting with my computer it just doesn't load the internet.
View 4 Replies View RelatedHAve UPnP enabled in the EA3500 but QNAP keep telling me "Your router does not support UPnP protocol or you have not enabled the UPnP function on the router"
View 8 Replies View RelatedI have managed to install a printer on my computer using the USB port on the E4200 router.I'm just wondering is it now possible to install this printer on other computers / laptops.I'm not really sure how the printer is assigned. Is there some network share I can connect to?
View 8 Replies View RelatedI am having no end of issues with this router since the upgrade to CCC. I don't want to downgrade because the reason I purchased the router was for the hopeful addition of more apps later on and the CCC.
My router has now suddenly decided to no longer broadcast N signals. My 2.4ghz network is set for mixed and my 5ghz is set for N Only. They are both set to auto channel and WPA2 Personal security and have been working since I purchased the router on Sunday.
Last night it spontaneously rebooted and that was that.
Both laptops (with N adapters) are seeing the 2.4ghz network as 802.11g and my 300Mbps notebook adapter is seeing the 5ghz network as 802.11a. InSSIDer is showing that both networks are now broadcasting at a max of 54Mbps.
I have tried rebooting the router multiple times. I have also tried unplugging it for 60 seconds. I have also attempted to force the 2.4ghz to 20Mhz and a more optimal (unused) channel. That doesn't work. I tried setting the 5ghz network to wide (40mhz) with an optimal channel. Same deal. Still seeing it as 802.11a.
I have just bought the EA3500 3 days ago.Also, I have been trying to find the way to rename the Guest Network to something without the -guest prefix.[url]....
View 1 Replies View RelatedExperienced problems with guest network not showing up as an available network on a device (laptop, iPad, etc)?I double checked if guest network is enabled on a EA3500 router. What other steps can I take?
View 5 Replies View RelatedI'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?
View 1 Replies View RelatedJust got a new EA3500, and plan to use its guest network feature to allow Internet access but not access to my LAN. Wondering if I can set it up so that users on the guest network bring up a particular website when they open their browser.
View 3 Replies View RelatedI just setup my EA3500 router and both SSID's are the same.Is this ok or should I give them unique names?Since they are the same what are my products connecting to?If I do separate them, what item should connect to what network?
View 5 Replies View RelatedI purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
I just bought a Linksys ea3500 and i'm trying to configure it.This is the case.I have a first router connected to internet and several computers connected to it.Then, I have a second router (ea3500) also connected to it.If i disable the dhcp and use it as an access point i can see all computers in the network.If if enable the DHCP it creates a private network and all pcs connected to this network can't see and access computers of the first network.The problem is that using EA3500 as an access point disables the most part of the features of the router.My question is: can i use it not as an access point (in order to have all features) but at the same time having access the first network and all computers on it?
View 3 Replies View RelatedThe latest Firmware for the E4200 states that there is now the ability to attach a printer to the USB port of the router. I am using a Mac, so that may be the problem, but I have followed the instructions on how to add the printer and it is not happening. It's possible that the MAC Firmware was not given the ability to add a USB printer like the PC Firmware upgrade.
View 9 Replies View RelatedI need the ssid or network name to install a printer, and apparently you can find it on the router's setup page. I have a Sagem@Fast 800 E3 - where do I find the setup page?
View 1 Replies View RelatedAll Installed my AE1000 this evening, after two go`s got it to work BUT the Cisco installer comes up with "Our customer support team can assist Your Linksys Adapter was not successfully setup." but it is working .. I never got the screen with the four "bubbles" (as per the instructions here on the Cisco website)
PS Running Win7 with AVG security
I have run three computers on my wireless network for a few years now, and have an HP OfficeJet 6500 Wireless printer that has worked seamlessly on all computers. That is, until I secured my router. I had an open wireless connection that I changed to secure (WPA) a couple of weeks ago and have been unable to connect to my printer wirelessly to print. It will print if connected to USB. The first day I was able to enter in my WPA key just fine, but not since. It doesn't appear to be finding my connection. Oddly enough one of our computers (a laptop) is able to print to this printer so I am not sure. All computers are running Windows XP, I believe with SP3. I use a D-link wireless router. I have tried using the HP solutions to no avail and have checked in the documentation that came with the printer.As an aside, I now appear to also have another wireless connection which is a "computer-to-computer" connection, I believe an ad-hoc connection?
View 3 Replies View RelatedI have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies View RelatedI have a home network with an older desktop, two laptops, couple of PDA and now a cellphone. I'm using using a WRT 110 router I bought new a couple of years ago. It run flawlessly even when I switch from DSL to Comcast Internet.My printer (HP All-in-one) is currently attached to the rear of my desktop and if I want to print anything I have to fire up the desktop. Can I plug the printer in the WRT 110? Be able to print form my laptops?
View 4 Replies View RelatedI cannot re-install my network printer via the USR web-print server at the URL identified by my USR5461 router page in Win XP SP3 even though it has worked for years. When I try to type in or cut & paste insert the URL for the web print server per USR's instructions, from the router home page, I get an error message that the printer was not found (even if I cut and paste the URL directly from my router's setup home page). The router home page indicates the printer status is "ready". In all other respects the router works fine for home networking and internet.I suspect I may have to manually set up an internet port for the printer but don't know how to do that in XP apparently.
View 3 Replies View Relatedhow to connect a network printer (HP OfficeJet Pro K8500DN) to the Cisco AE4500. Cisco's installation CD only believes there are USB or Wireless printers?
View 4 Replies View RelatedI have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
How do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies View RelatedHow to install 2 linksys router in same network?
View 1 Replies View Relatedsetup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.
View 1 Replies View RelatedFor hours i tried to find info online of how to access QoS on EA3500 router. I cannot find it on the cisco connect cloud page.
View 1 Replies View RelatedSystem:
HP Pavilion dv7-6135dx Ent Pc Win7 Home Prem 64
Motorola Surfboard Modem
Linksys EA3500 Router
Netgear 10/100 24 port switch
my wife bought me this EA3500 for Father's Day this year. It's only been hooked up for a couple of weeks (we were in the middle of a move during Father's Day), but now I have no wifi on either band. My wife can no longer connect to it either. We have tried completely resetting it, we have reset the modem, the switch, laptops, everything. Still no wifi. It worked out of the box, but now we have nothing. Does HP needs a certain type of driver? Our iPhones show connected and surf the brower's and FB app with no issues while in wifi mode, but then again, I can pull the ethernet from the internet port and the phone's still show connected (good job, iOS).Cable from main splitter runs to basement where the modem is located. Modem ethernet feed up a wall to a wall plate where the router is. Router then feeds back to the switch. The switch then sends the IP throughout the house for the LAN lines, and the EA3500 feeds all of the wireless devices (used to). So, Cable box, modem, router, switch. Router is currently good for LAN only. I am connected to it via LAN right now, 2 feet from my laptop.
In connections:IPv4/IPv6 both "No Internet Access" (for IPv4, if you change a setting in the setup, it becomes "Internet Access" for about 3 seconds.)Media State: EnabledSpeed: Alternates between 72Mbps and 144Mbps
In my home network, I have a Synology. It has 10.0.123.123 as local IP address on my local network and it can be accessed by internet with the dynamic domain name.So when I'm home, I have to use 10.0.123.123 to access it, and when I'm away, I have to use trucmuche.diskstation.me.Would it be possible to configure the EA3500 to redirect the domain name "trucmuche.diskstation.me" to 10.0.123.123 when I use the domain name inside my home ?A friend told me that I had to configure "loopback" but I don't know how..
View 3 Replies View Related
