Just upgraded to the EA3500 router and realized my wireless printer can not handle the 5ghz band.If I have the pc on the 5 ghz and the printer on the 2.4 they won't communicate correct?
View 2 RepliesI have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedWednesday, November 23, 2011I have an Airport Extreme dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell E5520 it will see both networks. On an iPhone 4 it will see both networks. I can connect any of these devices to either network.Just got the Linksys E3000 dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell it will only see the 2.4Ghz network. On an iPhone 4 it will only see the 2.4Ghz network.The Airport Extreme is powered off when using the E3000 so I know there is no interference from this router.E3000 Firmware Version 1.0.04. It's the latest.5Ghz Wireless Settings Network Mode: Mixed Channel Width: Auto (20Mhz or 40Mhz) Channel: Auto (DFS) 2.4Ghz Wireless Settings Network Mode: Mixed Channel Width: Auto (20Mhz or 40Mhz) Channel: Auto (DFS)Did not mess with any other settings. I have rebooted the computer, cycled the router and modem 3-4 times.Nothing works.My question is since both laptops and phone can see the 5Ghz network when running the Airport Extreme, why doesn't the 5Ghz network show up on the Dell and iPhone when running the E3000.
View 5 Replies View RelatedRouter: E4200
Router Firmware: 1.0.03 (Latest FW)
Why I cannot go to the 5Ghz band to utilize the superior speeds to transfer files over wireless connection between my computers? I am sure that I am still on the default 2.4 Ghz because
1) The file transfer speeds are pathetic
2) In Wireless Security, if I set the Wireless Mode to disabled for the 2.4Ghz band, Windows shows me "Unsecured Network" even with 2.4Ghz disabled.
I'm using a Linksys E3200 router with a Motorola modem and an elite xbox 360 with a wireless N networking adapter. (Black with two antennas.) I just recently bought this router because I wanted some faster gaming. I wanted to put my xbox on the 5ghz so it would have it all to itself, and have the two laptops share the 2.4ghz. But it won't let me onto the 5ghz band... I can see it on my xbox but it won't connect to it at all. I can get onto the 2.4 band but its at 802.11G, so its not even giving me N there, when it should be. I'm not sure if this is an issue with my adapter or router...I tried finding stuff about it, and it looked like people were blaming it on linksys, but that was almost a year ago. And there was never an update on what happened.I can see the 5Ghz band on my xbox (but only if the channel width is on 20Mhz only), but I can't find it on my computer. Which I find weird. I've been trying a lot of things and I just can't get my laptop to find it. So nothing is using the 5 band, and all my devices are crowded onto the 2.4...Is there some step in setting up the 5Ghz band that I'm missing maybe?
View 4 Replies View RelatedI have an E4200 V2. The 2.4ghz and 5ghz bands are both enabled and named differently. From what I've read they should both show up in the list of networks when I'm connecting other computers etc? All I'm getting is the 2.4ghz.Everything on the router is working fine as far as I can tell, just can't seem to access the 5ghz band. Maybe I recently upgraded to the Smart WiFi firmware but it's the same situation.The two bands have the same password with two of the first three letters switched on one.
View 3 Replies View RelatedI've had the wireless G adapter for a year now, and connections work with both 2.4GHz and 5GHz G connections. I just bought a wireless N adapter (2.4GHz and 5GHz capable), and cannot get an N connection.. On 2.4GHz it connects to G only. And on 5GHz, I don't even see the whole band to connect to it.
I've tried disabling the 5GHz band on the E3000, then even setting the 2.4GHz band to no security. I still get a G only connection.My laptop can connect to 2.4GHz and get 144Mbps N speeds.Router is at latest firmware.I've researched this online, but can't find anything concrete.
My belkin wireless dual band router just stopped broadcasting on the 2.4 band. The 5 band still worked (my wife's phone could still connect to it no problem).My cell is a motorola Razr maxx and only works on the 2.4. I have an app (wifi analyzer) that allows me to see what is happening with my network - specifically when i would try to connect to my network - my network name would be listed but as soon as I hit "connect" it would disappear. Only to come back into the list saying "MYNETWORK saved, secured WPA/WPA2". Every time I would try to connect same thing. Contemporaneously, I would check the network activity using wifi analyzer and could see that roughly each time I tried to connect to my network - it would drop off completely.Ok - after scouring the internet - it does seem that a wireless router can stop broadcasting on the 2.4 and still have the 5 band work. (btw - my pc is hardwired through the router and is not affected).So I bought a new Linksys 3500 dual band router. I installed it and it has worked fine....up until yesterday.Now I have the same problem. While my wife's phone still works on the 5 band it will not work on the 2.4. In fact nothing will work on the 2.4. Could I have just bought a crappy router?I'm not sure what pertinent info to list...Cell Stratosphere - works on 5 band not 2.4Cell Android razr maxx - will not connect on 2.4 (5 is not an option)Kindle - can not connect on 2.4Roku - can not connect on 2.4Tivo - can not connect on 2.4Older Linksys modem works with no problem.PC (sefl-built) running Windows 7 64 bit (w/ Norton) is not having any problems with connectivity - as it is hard-wired into the router.I've switched the 2.4 broadcast channel from 1 through 11. Nothing.I've cycled both the modem and the router about a dozen times - does not fix the issue.I have reset the router back to factory settings 3 times - no fixI am using WPA/WPA2 - but I have changed the router to run as unprotected - nothing changes.I've even out of desperation gone back and tried restoring my system to earlier restore points just to see if anything would happen. zilch.So did i just catch some bad luck by buying a faulty router?
View 9 Replies View RelatedI set up my new EA4500 last night, and configured the 5Ghz and 2.4Ghz bands with separate SSIDs (as recommended). While I can see the 2.4Ghz band with all of my devices, I cannot see the 5Ghz band with any of them.I followed the advice given (including the settings shown) on the EA4500 FAQ.Title: Personalizing and connecting to the 5 GHz wireless band on a Linksys Wireless-N routerArticle ID: 21466.Did that *multiple* times, and still nothing. I do have a dual-band capable adapter (Netgear RangeMax WNDA3100 Dual Band Wireless-N Adapter) that I know works on 5Ghz (because I had it working on my old dual-band WDNR3700v1). Similarly, I have PCs sitting less than 20 feet away that were previously able to see the 5Ghz band on my old router, but are now unable to see it on the EA4500.
View 9 Replies View RelatedI just setup my EA3500 router and both SSID's are the same.Is this ok or should I give them unique names?Since they are the same what are my products connecting to?If I do separate them, what item should connect to what network?
View 5 Replies View RelatedI am unable to connect a printer using the USB port on my new Linksys EA3500 router.
I followed the directions here: Support Page , but my verison of Cisco Connect does not have the option to "connect a USB printer".
I am on a macbook pro running OSX 10.7.4 and my verison of Cisco Connect is 1.4 (12005.2). My router's firmware version is 1.0.30.126544. A screenshot of what I see after clicking "add a device" in Cisco Connect is below. The printer is an HP DeskJet F4280.
I've recently purchases a Canon MF3010 Multifunction printer, and connected this to my EA3500 router's USB port. Used Cisco Connect to setup the printer, and the print function is working fine.
The issue is with the scan function. It appears the default functionality of the router is to only activate the connection to the printer when a print job is fired off. When this connection is active, the scan functionality works fine.
Another way to activate the connection to the printer to allow for scanning would be to go through
Cisco Connect>Computers and devices>PrinterWhile the process is running (searching for printer), the connection is active as well, and scanning works fine. When the process is closed, scanning no longer works, with an error message stating that communication to the printer cannot be established.
Is there a simpler way to keep the connection to the printer active, or some sort of configuration to automatically establish this connection for scanning?
I just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies View RelatedJust purchased new N750 model EA3500-NP and everything went ok until I tried to get my HP Laser Jet P2035n online. No go! It worked fine on the D-Link via Ethernet connection.
View 4 Replies View RelatedI recently bought EA3500 router. I am not able to hook up 2 storage external HDD and 1 USB printer usnig the router.I am connecting all 3 to a USB hub which i am connecting to the router.
View 1 Replies View RelatedI was wondering if the EA3500 would support splitting the USB (buying a USB tree) to allow for both a printer and hard drive to connect at the same time?
View 1 Replies View Relatedjust got my AE3000 today. It's working fine. The box says "2 GHz or 5 GHz" but there are no instructions on how to select one or the other. I don't even know which it is using. How do I set this? I'd like to make sure it's on the 5 GHz band.
View 1 Replies View RelatedI have a WMP600N in my desktop (win7 x32) and I just got a new router (e2500). I put it on 5ghz only and it won't even pick up the signal. My laptop connects without any problems. It has a Intel Centrino Advanced N 6200. When I go to the properties it only has a short list of things. I also have XP and more options come up.
View 4 Replies View RelatedThe product literature for the AE1000 says that you can select which band to use. However there doesn't seem to be an option to do that. I have an E4200 and when I set it up, it assigned my 5GHz and 2.4GHz bands the same SSID. If I configure the AE1000 to connect to that SSID, it seems to connect to the 2.4GHz band. Do I have to change the SSID for 5GHz and initiate a connection to it manually?
View 9 Replies View RelatedRegion : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n
I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.
Until recently I used the 2.4GHZ band for my pc and my son used 5GHZ for his laptop on our D-link router.A couple of weeks ago our provider installed a new Cisco modem/router-in-one (the old modem didn't work any more). We use the D-link as a second router. The 2.5Ghz band is no problem but my son doesn't get internet access with 5Ghz
View 3 Replies View RelatedI just bought the D-link router DIR-815. I set both bands on but when I connected the blue-ray disk for streaming Netflix movies it connected on the 2.4 Ghz. How do I set up the 5Ghz band?
View 3 Replies View Relatedfind a 3x3 (450mbps) WiFi antenna for the 802.11n 5GHz band? I'm pretty much looking for something similar to this, which works at 2.4GHz:
[URL]
I've done a considerable amount of searching and have not been able to come up with anything. Individual 5GHz dipole antennas can be bought online, but these would be a sub-optimal solution for me, as I would like the antenna to have a solid base so it can sit on the desk/bookshelf.Edit: Found a Proxim antenna that claims to be dual-band, but it's pricey. Also claims to use reverse SMA connectors, so should work with desktop WiFi cards or mini PCIe cards with pigtails.[URL]
I've had the DIR-825 router for more than a year now and I've never once been able to see the second SSID that broadcasts at 5Ghz. I've set up both bands with identical settings and I have a wireless N network adapter in my laptop, but it only ever sees the 2 Ghz SSID, never the 5 Ghz one. Shouldn't I be able to see it?
View 3 Replies View RelatedI installed my 1522 today with a Direct TV receiver and made a connection using AP mode.
How do I know what band is being used and how to switch between the bads.
Have hooked up a DIR-825 to an iMac and it works well on 2.4GHz band. Having issues seeing 5GHz band as it comes and goes. Just today bought a DWA-160 USB adapter hoping it would connect the kid's PS3 to the 5GHz band but the PS3 wont accept or recognize either the DWA-160 or the 5GHz band.
Can't find any solutions in the manuals.Desperate for a fix as the wife and I want to be able to work on the 2.4GHz without being constantly kicked off by the kids on the PS3.
Is it possible to turn off the 5Ghz signal on a Dual Band Router N750 DB (F9K1103v1)?
View 1 Replies View Relatedwe are currently using a modem router LINKSYS WAG120N Wireless-N ADSL Router but are not satisfied. lots of dead zones and I think that there are too many users for this AP. last count gave around 20 users. so I'm looking for a solution to be able to handle 20+ concurrent connections and with large coverage - 600 m² .
View 7 Replies View RelatedI have the WRT54G v2.2 router. I have Comcast internet service. Comcast has just increased their internet download speed to 50Mbps. With a wired computer (not wireless), connected directly to the router, the fastest internet download speed I get is 30Mbps. When I called Comcast's technical support, they are telling me I need a new router as the older routers can't handle these high internet speeds.
View 2 Replies View RelatedF9K117 - I can't see my broadcast ssid for the 5ghz band. Is there anything I can do?
View 3 Replies View RelatedI have a client family who will be moving into a big one floor (but on a giant slope hill as if it had two floors) house. About 88 feet seems to be the longest distance from a small room with the new cable modem. This is based on Google Maps' aerial shot: [URL] Longest Distance FromACableModemRoom.jpg (right side/east is a huge hill with trees).Will an old wireless Linksys WRT54GL router be able to handle this far distance with fast speeds and stability? If not, then which wireless routers can do it? It would be nice to have third party firmware options like Linksys WRT54GL routers. Also, fast speed like gigabits for fast local file transfers between computers in the big house! 100mb/sec is slow these days! Stability and support are important too. The routers doesn't need to be the latest too
View 9 Replies View RelatedI recently upgraded my d-link router DI-524 for Netgear N600 WNDR3700v3 and every component (wired or wireless) is working except network printer. I have it wired directly to the router and all pcs on the home network can see it, however when i select to do a test print, nothing prints to the printer and i get error. I had this setup using the d-link router with both the printer and the XP PC wired directly to the router and using the XP PC as a network pc sharing the printer to other pcs (Vista / Windows 7) on the home network.The printer is a Toshiba e-studio 160 series.. I re-added the print drivers for XP and still not able to print. Is there anything else I can try?
View 9 Replies View Relatedsetup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.
View 1 Replies View Related