Linksys Wireless Router :: E3200 / Can't Connect To 5Ghz Band

Apr 15, 2012

I'm using a Linksys E3200 router with a Motorola modem and an elite xbox 360 with a wireless N networking adapter. (Black with two antennas.) I just recently bought this router because I wanted some faster gaming. I wanted to put my xbox on the 5ghz so it would have it all to itself, and have the two laptops share the 2.4ghz. But it won't let me onto the 5ghz band... I can see it on my xbox but it won't connect to it at all. I can get onto the 2.4 band but its at 802.11G, so its not even giving me N there, when it should be. I'm not sure if this is an issue with my adapter or router...I tried finding stuff about it, and it looked like people were blaming it on linksys, but that was almost a year ago. And there was never an update on what happened.I can see the 5Ghz band on my xbox (but only if the channel width is on 20Mhz only), but I can't find it on my computer. Which I find weird. I've been trying a lot of things and I just can't get my laptop to find it. So nothing is using the 5 band, and all my devices are crowded onto the 2.4...Is there some step in setting up the 5Ghz band that I'm missing maybe?

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?

Apr 14, 2010

I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.

View 9 Replies View Related

Linksys Wireless Adapters :: WMP600N Won't Connect To 5GHZ Band?

Nov 3, 2011

I have a WMP600N in my desktop (win7 x32) and I just got a new router (e2500). I put it on 5ghz only and it won't even pick up the signal. My laptop connects without any problems. It has a Intel Centrino Advanced N 6200. When I go to the properties it only has a short list of things. I also have XP and more options come up.

View 4 Replies View Related

Linksys Wireless Router :: Setting Up 5ghz SID On E3200?

Apr 23, 2012

My channel width is  Channel Width is 40 mhz only, and my channel is Auto DFS?These seem like good settings?My macbook air sometimes see's my 5ghz wireless SID, and sometimes it connects to it, but i still have no internet access for some reason

View 3 Replies View Related

Linksys Wireless Router :: E3000 5Ghz Band Seen By Mac But Not PC

Nov 23, 2011

Wednesday, November 23, 2011I have an Airport Extreme dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell E5520 it will see both networks. On an iPhone 4 it will see both networks. I can connect any of these devices to either network.Just got the Linksys E3000 dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell it will only see the 2.4Ghz network. On an iPhone 4 it will only see the 2.4Ghz network.The Airport Extreme is powered off when using the E3000 so I know there is no interference from this router.E3000 Firmware Version 1.0.04. It's the latest.5Ghz Wireless Settings
Network Mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channel: Auto (DFS)

2.4Ghz Wireless Settings
Network Mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channel: Auto (DFS)Did not mess with any other settings. I have rebooted the computer, cycled the router and modem 3-4 times.Nothing works.My question is since both laptops and phone can see the 5Ghz network when running the Airport Extreme, why doesn't the 5Ghz network show up on the Dell and iPhone when running the E3000.

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Go To 5Ghz Band

Oct 23, 2011

Router: E4200
Router Firmware: 1.0.03 (Latest FW)

Why I cannot go to the 5Ghz band to utilize the superior speeds to transfer files over wireless connection between my computers? I am sure that I am still on the default 2.4 Ghz because

1) The file transfer speeds are pathetic
2) In Wireless Security, if I set the Wireless Mode to disabled for the 2.4Ghz band, Windows shows me "Unsecured Network" even with 2.4Ghz disabled.

View 9 Replies View Related

Linksys Wireless Router :: E4200v2 Can't Seem To Access 5ghz Band

Jan 19, 2013

I have an E4200 V2. The 2.4ghz and 5ghz bands are both enabled and named differently. From what I've read they should both show up in the list of networks when I'm connecting other computers etc? All I'm getting is the 2.4ghz.Everything on the router is working fine as far as I can tell, just can't seem to access the 5ghz band. Maybe I recently upgraded to the Smart WiFi firmware but it's the same situation.The two bands have the same password with two of the first three letters switched on one.

View 3 Replies View Related

Linksys Wireless Router :: Disabling 5GHz Band On E3000

Jul 17, 2011

I've had the wireless G adapter for a year now, and connections work with both 2.4GHz and 5GHz G connections. I just bought a wireless N adapter (2.4GHz and 5GHz capable), and cannot get an N connection.. On 2.4GHz it connects to G only. And on 5GHz, I don't even see the whole band to connect to it.
 
I've tried disabling the 5GHz band on the E3000, then even setting the 2.4GHz band to no security. I still get a G only connection.My laptop can connect to 2.4GHz and get 144Mbps N speeds.Router is at latest firmware.I've researched this online, but can't find anything concrete.

View 7 Replies View Related

Linksys Wireless Router :: EA3500 - Printer Cannot Handle 5ghz Band

May 5, 2013

Just upgraded to the EA3500 router and realized my wireless printer can not handle the 5ghz band.If I have the pc on the 5 ghz and the printer on the 2.4 they won't communicate correct?

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Connection To 5Ghz Band With Separate SSIDs?

Apr 11, 2012

I set up my new EA4500 last night, and configured the 5Ghz and 2.4Ghz bands with separate SSIDs (as recommended). While I can see the 2.4Ghz band with all of my devices, I cannot see the 5Ghz band with any of them.I followed the advice given (including the settings shown) on the EA4500 FAQ.Title: Personalizing and connecting to the 5 GHz wireless band on a Linksys Wireless-N routerArticle ID: 21466.Did that *multiple* times, and still nothing. I do have a dual-band capable adapter (Netgear RangeMax WNDA3100 Dual Band Wireless-N Adapter) that I know works on 5Ghz (because I had it working on my old dual-band WDNR3700v1). Similarly, I have PCs sitting less than 20 feet away that were previously able to see the 5Ghz band on my old router, but are now unable to see it on the EA4500.

View 9 Replies View Related

Linksys Wireless Router :: E3200 Dual Band 5 GHz SSID Not Broadcasting

Aug 20, 2011

I changed the 5 GHZ SSID name using Cisco connect on my E3200 router as was expecting to see 2 available wireless networks on my laptop, but it seems that only the 2.4 GHZ is still broadcasting as it was before. When I connect to it with my laptop it shows it connecting with 802.11n, so I would think that my laptop would see the 5 GHz SSID if it was broadcasting. I am trying to take advantage of the dual band feature and connect the 5 GHZ to my blue ray player for real time video streaming.

View 9 Replies View Related

Linksys Wireless Adapters :: AE3000 How To Switch To 5GHz Band

Dec 15, 2012

just got my AE3000 today.  It's working fine.  The box says "2 GHz or 5 GHz" but there are no instructions on how to select one or the other.  I don't even know which it is using.   How do I set this?  I'd like to make sure it's on the 5 GHz band.  

View 1 Replies View Related

Linksys Wireless Adapters :: How To Select 5GHz Band For AE1000

Mar 4, 2011

The product literature for the AE1000 says that you can select which band to use. However there doesn't seem to be an option to do that. I have an E4200 and when I set it up, it assigned my 5GHz and 2.4GHz bands the same SSID. If I configure the AE1000 to connect to that SSID, it seems to connect to the 2.4GHz band. Do I have to change the SSID for 5GHz and initiate a connection to it manually?

View 9 Replies View Related

TP-Link Dual-Band Wireless :: Low Signal Range From WDR4300 Router On Both Bands And Especially On 5Ghz

Mar 24, 2013

Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n

I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To 360 Using 5ghz

Jun 27, 2012

I've found a few people with this problem on the internet.  I'm using my phat 360 with the black N adapter.  e2500 is updated to the latest firmware.  But my 360 cannot connect to the 5ghz N, only 2.4ghz g.  The wierd thing is that the 5ghz signal gives a better signal than the 2.4ghz.
 
I just found a thread on google talking about the e4200 and someone mentioned counterfit  adapters and problems with them.  I did buy this on ebay for a cheap price, so it looks like it was too good to be true.  this is a counterfit? It does have a real hologram on it.

[URL]

If this is real, what else could be the problem.  Has the firmware not been updated to support the 360?

View 6 Replies View Related

Linksys Wireless Router :: Cannot Connect To 5GHz 802.11n Network On E4200v2

Jan 20, 2012

I have an E4200v2 configured with an n-only 5GHz network and a mixed 2.4GHz network. Our MacBooks and iPad connect to the 5GHz network, and everything else (iPhones, TVs, etc) connect to the 2.4GHz network. If I disable "WMM" on the QoS screen, nothing can connect to the 5GHz network. Those same devices can connect to the 2.4GHz network, but not the 5GHz. The MacBooks, for example, get a connection timeout error, and the iPad just says "cannot connect." This doesn't seem quite right. I don't absolutely need to disable WMM, but I wanted to make sure that normal WiFi Internet traffic didn't get priority over local wired Mac->AppleTV streaming or voice calls from our wired Vonage box.

View 2 Replies View Related

Linksys Wireless Router :: Unable To Connect To E3000 When Set To 5GHz

May 5, 2011

I've not been able to connect to my to Linksys E3000 when set to 5GHz "N" only Network mode.  Connections to the 5GHz can only be done in mixed mode.  I do not need to have A-Mode enabled, so I do not wish to use mixed.

View 4 Replies View Related

No Internet Access On 5Ghz Band With Dlink Router

Mar 3, 2013

Until recently I used the 2.4GHZ band for my pc and my son used 5GHZ for his laptop on our D-link router.A couple of weeks ago our provider installed a new Cisco modem/router-in-one (the old modem didn't work any more). We use the D-link as a second router. The 2.5Ghz band is no problem but my son doesn't get internet access with 5Ghz

View 3 Replies View Related

Linksys Wireless Router :: Xbox / PC Can't Connect To 5gHz Network (E4200 V2)

May 24, 2012

My network is discoverable, but my machines will not connect (they were connected previously).  They can connect to the 2.4gHz network, but not the 5 (I use the 5 for streaming media and gameplay).  Windows 7 says it's unable to connect.

View 8 Replies View Related

Linksys Wireless Router :: E3200 - Connect USB Hub?

Oct 18, 2011

I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?

View 1 Replies View Related

Linksys Wireless Router :: E3200 Cannot Connect To Internet?

Dec 18, 2011

The problem I have was that last night I unplugged my router and replugged it back in. As soon as that happened, there was no connection between my router and the modem. This morning, I tested to see if it was the modem by connecting an ethernet cable from my desktop to it, and was able to get online. Then, II reset the router and a sucessful connection was made between the two. On my desktop my old network was gone, but the Cisco network was there, leading me to create a new network as if it was a new router. After setting up a new network, I am not able to connect to the internet.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Can't Connect Wired?

Aug 31, 2012

I have an E3200 router. I had been experiencing connection problems with my desktop that was wired to the router, and in an attempt to resolve the issue reset the router to its factory defaults. Now, as before the reset, I can connect to my router just fine via Wi-Fi (I have several devices connected this way) but none of the computers that I attempt to connect via ethernet are able to establish a connection. I have tested multiple cables with multiple computers using multiple ports on the router, to no avail. When I view the Status --> Ports page on the router, I can see the ports in use that I am connected to, but that is the only sign of connection that I get.

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Cannot Connect To Internet

May 14, 2011

I have purchased a new E3200 to replace my old Linksys router.  It locates my computers and sets up a network, but cannot connect to the internet via my Comcast cable modem.  I have read on this forum about Mac address issues, but it has located the Mac address.  The internet IP address is all zeros, and releasing and renewing the IP does nothing

View 9 Replies View Related

Linksys Wireless Router :: E3200 Will Not Connect To The Internet

Jun 17, 2012

I have a Telus Wireless modem and got a linksys router to try and expand the range & strength of the wifi. However,whenever I plug in the router and try to set it up, I can get connected to the router but no internet connection.I have tried everything I can - restarted the modem and the router several times, connected and reconnected, rebooted the whole of the router system, connected with an ethernet cable straight to the router from my laptop. In the settings, I have tried to mess around with the settings and more, and whenever I screw up I reset the router to defaults again. 

View 3 Replies View Related

Linksys Wireless Router :: E3200 Cannot Connect To Internet

Jan 3, 2012

I have was that last night I unplugged my router and replugged it back in. As soon as that happened, there was no connection between my router and the modem. This morning, I tested to see if it was the modem by connecting an ethernet cable from my desktop to it, and was able to get online. Then, II reset the router and a sucessful connection was made between the two. On my desktop my old network was gone, but the Cisco network was there, leading me to create a new network as if it was a new router. After setting up a new network, I am not able to connect to the internet

View 3 Replies View Related

Linksys Wireless Router :: Will All Usb Printers Be Able To Connect To E3200

Jun 10, 2011

Will all usb printers be able to connect to the e3200 by usb with the firmware update? If not, what printers will be supported?

View 9 Replies View Related

Linksys Wireless Router :: E3200 Can Connect Other Computers But Not IOS Devices

Dec 2, 2012

Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: E3200 / Possible To Use As USB Hub And Connect Multiple Devices?

Jul 21, 2012

I just bought the E3200 and have it all set up and have been able to successfully print from the USB port. I want to know if you can use a USB hub to connect multiple devices to the router. I found a couple of similar questions on the forum, but they're all back in 2011 before the 1.4 update to Cisco Connect. 

View 1 Replies View Related

Linksys Wireless Router :: E3200 Couldn't Connect Via Wi-Fi Devices

Feb 9, 2012

I bought the E3200 to replace an older Linksys model. The older model worked but the signal was weak throughout the house. I installed the e3200 using the Cisco connect software but it told me that it wasn't sure I was connected to the internet. I wasn't. Showed a strong signal but could not connect via wireless devices or from the cable from  the router to the desktop.
 
I have LUS Fiber service which does not use a modem. I have had them recycle the signal several times and have done tried many different variations of the MAC numbers from ipconfig or from cloning. Have also tried it with the MAC cloning disabled so the router's MAC number is used. I have reset, rebooted and done just about every possible option.
 
 Spoke with my provider many times and they insist they are sending me a signal. They also recognized the router's MAC number on their end.I purchased one router and it wouldn't connect, so I exchanged it. All these shenanigans I have gone through are with the second router because I figured the hardware isn't the problem.

View 1 Replies View Related

Linksys Wireless Router :: Connect Error 80004005 With E3200

Jun 17, 2011

I had Cisco Connect and USB printing off of the E3200 working, but now I'm getting an error and cannot print to HP Laserjet P1006 on my E3200's USB port. Cisco Connect has an error: Error code: 80004005 Model name: Linksys E3200 Model number: E3200 Serial number: Firmware version: 1.0.01 build 3 Operating system: Windows 7 Software version: 1.4.11145.0 Connection type (WAN): DHCP IP address (LAN): 192.168.0.253 IP address (WAN): 192.168.2.100 Computer IP address: 192.168.0.149

View 9 Replies View Related

Linksys Wireless Router :: WRT610N 5ghz Xbox 360 Wireless N Adapter Won't Connect

Aug 12, 2011

WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
 
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.

I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Can't Connect To Wifi Radios Wirelessly?

Sep 23, 2012

I just installed an E3200 to replace my old Linksys.  All my Nooks, IPADs, laptops and desktops are connecting wirelessly fine. However, I have 2 Wi Fi Radios that will pick up the network but will not connect and go into a network connect time out. One of the radios also has a hardwired connection and that is working fine.  I have checked and double checked the network name, WPA key, etc. Of course I have reset all the radios and reenter new data many times, both manually and auto.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved