Linksys Wireless Router :: Setting Up 5ghz SID On E3200?

Apr 23, 2012

My channel width is  Channel Width is 40 mhz only, and my channel is Auto DFS?These seem like good settings?My macbook air sometimes see's my 5ghz wireless SID, and sometimes it connects to it, but i still have no internet access for some reason

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: E3200 / Can't Connect To 5Ghz Band

Apr 15, 2012

I'm using a Linksys E3200 router with a Motorola modem and an elite xbox 360 with a wireless N networking adapter. (Black with two antennas.) I just recently bought this router because I wanted some faster gaming. I wanted to put my xbox on the 5ghz so it would have it all to itself, and have the two laptops share the 2.4ghz. But it won't let me onto the 5ghz band... I can see it on my xbox but it won't connect to it at all. I can get onto the 2.4 band but its at 802.11G, so its not even giving me N there, when it should be. I'm not sure if this is an issue with my adapter or router...I tried finding stuff about it, and it looked like people were blaming it on linksys, but that was almost a year ago. And there was never an update on what happened.I can see the 5Ghz band on my xbox (but only if the channel width is on 20Mhz only), but I can't find it on my computer. Which I find weird. I've been trying a lot of things and I just can't get my laptop to find it. So nothing is using the 5 band, and all my devices are crowded onto the 2.4...Is there some step in setting up the 5Ghz band that I'm missing maybe?

View 4 Replies View Related

Linksys Wireless Router :: Setting Up E3200 For TV Flux?

Dec 22, 2012

I do have a problem setting up the above mentioned router with my French Internet/TV provider.
 
The French Internet/TV access is provided through, what they call "Freebox". I have the v6 version, which exists of 2 parts, a server and a player. The server is equiped with 4 Ethernet ports and has a build-in NAS of 250 GB for storing and accessible for everybody on out home network. The server is connected via Ethernet to the player, which in turn is connected via hdmi to my TV.
 
In order to extend my network, I used an old Belkin 54g Wi-Fi router without a problem. Since the wi-fi died on the Belkin, I replaced it by the E3200.
 
I also want to use the wireless capabilities of the E3200 in our living room.
 
Internet access, through cable and/or Wi-Fi works without a problem with this setup. The only problem is: I don't have access to the TV channels. I am getting a popup on my TV saying that the Ethernet cable is disconnected! The cable is fine since it works with my Belkin.
 
The configuration is the following:     ADSL cable to the Freebox server => port 1 connected to port 1 of the E3200 via a crossover cable => port 2 of the E3200  connected via a straight cable to the freebox player => hdmi cable between player and TV
 
Asking around, it seems that the Freebox server is using an encrypted VLAN100 connection to the player for TV channels. The problem must be there. how to setup a port - if possible - to handle the TV flux. I know a bit about hardware what concenrs pc's, but my knowledge about networking and addressing ports is rather poor.
 
What I did so far is the following: Since the Freebox server has its IP set at 192.168.0.254, I setup my E3200 at 192.168.0.5 with sub mask 255.255.255.0 and disabled DHCP. As I said before, it works for internet and connecting laptops through the router ports. But my knowledge stops there.
 
What I would like to know if it is possible, setting up/directing one port in a VLAN mode in order to get access to my TV channels and leave the other ports for normal internet access. Just a small tuto with an example would do.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Can't See 5ghz Network

Aug 21, 2011

I have e4200 router set up with different SSIDs for 2.4ghz and 5ghz.  My laptop (Lenovo x220 with Intel 6205 wireless adapter) can't see the 5ghz network.  I've tried changing the channel for the 5ghz network and it didn't fix the problem.

View 9 Replies View Related

Linksys Wireless Router :: E2500 Low Signal On 5Ghz

Feb 20, 2012

I am using the E2500 with the Wireless N-pci adapter with dual band, both with the latest drivers / firmware, and I am getting extremely low signal quality and connection speed when connecting to the 5 Ghz network.My computer is no more than 15 feet away from the router, and on the same level. I also verified the connection with the 2.4 Ghz band, and it reads as excellent, and with 54 mps. Using 5 Ghz I get one bar of signal quality (very poor) and no more than 13 mps connection speed.

View 9 Replies View Related

Linksys Wireless Router :: E3000 5Ghz Band Seen By Mac But Not PC

Nov 23, 2011

Wednesday, November 23, 2011I have an Airport Extreme dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell E5520 it will see both networks. On an iPhone 4 it will see both networks. I can connect any of these devices to either network.Just got the Linksys E3000 dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell it will only see the 2.4Ghz network. On an iPhone 4 it will only see the 2.4Ghz network.The Airport Extreme is powered off when using the E3000 so I know there is no interference from this router.E3000 Firmware Version 1.0.04. It's the latest.5Ghz Wireless Settings
Network Mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channel: Auto (DFS)

2.4Ghz Wireless Settings
Network Mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channel: Auto (DFS)Did not mess with any other settings. I have rebooted the computer, cycled the router and modem 3-4 times.Nothing works.My question is since both laptops and phone can see the 5Ghz network when running the Airport Extreme, why doesn't the 5Ghz network show up on the Dell and iPhone when running the E3000.

View 5 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To 360 Using 5ghz

Jun 27, 2012

I've found a few people with this problem on the internet.  I'm using my phat 360 with the black N adapter.  e2500 is updated to the latest firmware.  But my 360 cannot connect to the 5ghz N, only 2.4ghz g.  The wierd thing is that the 5ghz signal gives a better signal than the 2.4ghz.
 
I just found a thread on google talking about the e4200 and someone mentioned counterfit  adapters and problems with them.  I did buy this on ebay for a cheap price, so it looks like it was too good to be true.  this is a counterfit? It does have a real hologram on it.

[URL]

If this is real, what else could be the problem.  Has the firmware not been updated to support the 360?

View 6 Replies View Related

Linksys Wireless Router :: EA2700 WPS-PIN 5GHz Does Not Work

Mar 15, 2013

EA2700v1 WPS-PIN using 5GHz does not work.  This router includes WPS header in its 5GHz beacon and probe response but the router removes the WPS header from them once WPS-PIN starts.   There is no problem with WPS-PIN using 2.4GHz. 

View 1 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 25, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072, how to add 149,153,157,161 channels?

View 3 Replies View Related

Linksys Wireless Router :: EA4500 5GHz SSID Cannot Be Hidden?

Sep 10, 2012

I have found that if I do not enable the broadcast SSID option on my 5GHz N network that my devices will forget the network and not reconnect on their own.  Yet, I have the 2.4GHz G/N network set up to not broadcast my SSID and I have no problems.  Why can't I disable my SSID broadcast on the 5GHz N network without these problems?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Only Hitting 54Mb/s On 5GHZ

Feb 21, 2012

I ended up with an RMA for a new E4200 ver. 1 and the problem I have still persists.  My 2 GHZ WAP gets 65Mbp/s to its connected devices.  However, the 5.4 GHZ WAP gets 48 to 54 Mbp/s only.My laptops have Windows 7 and Ubuntu.  The WiFi cards are Intel Centrino Advanced-N 6200 and 6230.  Both fluctuate at 48 - 54Mb/s on the the 5.4GHZ channel.
 
If I put it on Wireless-N only, the laptops cannot connect.  I have tried AUTO detection for mhz and channels.  I have tried 40mhz with channels 149 and 161 with no difference.Currently, I am operating both WAPs on different SSIDs to make sure my results are separate.Security for both WAPs is WPA2-Personal with a 10 digit sequence.

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: 3200 Keeps Dropping 5ghz Wifi

Feb 2, 2012

I purchased the linksys 3200 dual band router recently.  I am a huge cisco and linksys supporter so for me this is disappointing. Aside from being slower at times than my previous router I am having issues with the 5Ghz wireless.  My issue I am facing is it seems multiple times throughout the day the router somehow drops its 5ghz wireless ssid or its gone..not sure.  The only way I can get it back up and running is to reconnect with the Cisco Connect software and re-establish the settings and then reconnect any wireless devices.  This seems to happen sporadically and is insanely annoying considering this router should be a big upgrade.
 
It seems to me the 2.4Ghz band seems to be more stable.  I am on the latest firmware for the device and I am using a 5ghz compatible wireless device to connect to it.  

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Go To 5Ghz Band

Oct 23, 2011

Router: E4200
Router Firmware: 1.0.03 (Latest FW)

Why I cannot go to the 5Ghz band to utilize the superior speeds to transfer files over wireless connection between my computers? I am sure that I am still on the default 2.4 Ghz because

1) The file transfer speeds are pathetic
2) In Wireless Security, if I set the Wireless Mode to disabled for the 2.4Ghz band, Windows shows me "Unsecured Network" even with 2.4Ghz disabled.

View 9 Replies View Related

Linksys Wireless Router :: E 4200 - How To Make 5gHz Network

May 3, 2012

I have the E4200. I have two networks, a 2.4 for internet, and a 5gHz for media. I want to have a wired connection to the 5gHz network as some of the media is on my PC. However, it seems I can only have a wired connection to the 2.4gHz network. Is there any way to do this?

View 3 Replies View Related

Linksys Wireless Router :: Cannot Connect To 5GHz 802.11n Network On E4200v2

Jan 20, 2012

I have an E4200v2 configured with an n-only 5GHz network and a mixed 2.4GHz network. Our MacBooks and iPad connect to the 5GHz network, and everything else (iPhones, TVs, etc) connect to the 2.4GHz network. If I disable "WMM" on the QoS screen, nothing can connect to the 5GHz network. Those same devices can connect to the 2.4GHz network, but not the 5GHz. The MacBooks, for example, get a connection timeout error, and the iPad just says "cannot connect." This doesn't seem quite right. I don't absolutely need to disable WMM, but I wanted to make sure that normal WiFi Internet traffic didn't get priority over local wired Mac->AppleTV streaming or voice calls from our wired Vonage box.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - 2 Units 5ghz Keeps Dying

Jun 23, 2011

I bought an e4200 about 2 months ago. It worked perfectly for 3 weeks. Then all of the sudden, the 5ghz connection started dropping. Then it's disappeared completely and it would not show up in a network search. Then the 2.4 ghz started going crazy. I reset it completely, that didn't work. I let it sit for half a day, nothing. I sent it back to newegg and got a replacement. When the 2nd one came in, it worked fine until the next day. 5ghz cut out. I called linksys support and they were no  luck. I reflashed to 1001 firmware and it mysteriously came back to normal. It was working perfect until today. 3 weeks later. 5ghz went out, and never came back. I reflashed 1001, nothing. Reset, nothing. Flashed the new 1002 firmware, nothing. 2.4ghz still kind of works, but the speed is barely 5mbps. I'm at a freaking loss right now. This was the best performing router I have tried, of all the top models available right now

View 8 Replies View Related

Linksys Wireless Router :: Unable To Connect To E3000 When Set To 5GHz

May 5, 2011

I've not been able to connect to my to Linksys E3000 when set to 5GHz "N" only Network mode.  Connections to the 5GHz can only be done in mixed mode.  I do not need to have A-Mode enabled, so I do not wish to use mixed.

View 4 Replies View Related

Linksys Wireless Router :: E4200v2 Can't Seem To Access 5ghz Band

Jan 19, 2013

I have an E4200 V2. The 2.4ghz and 5ghz bands are both enabled and named differently. From what I've read they should both show up in the list of networks when I'm connecting other computers etc? All I'm getting is the 2.4ghz.Everything on the router is working fine as far as I can tell, just can't seem to access the 5ghz band. Maybe I recently upgraded to the Smart WiFi firmware but it's the same situation.The two bands have the same password with two of the first three letters switched on one.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Routing For 5GHz Clients

May 25, 2012

I just upgraded my in-laws network from a WRT54G to a E4200. It's working but I'm getting issues with the 5Ghz end. I've got both SSIDs using different names.. so its clear which I'm connecting to. I have a macbook pro which has N support and can see the 5GHz SSID.The issue I get is that when I connect to the 5Ghz SSID, the laptop cannot ping or connect to LAN clients on the 2.4GHz end. This includes SMB shares, a couple of devices with web interfaces and one machine running a VNC server. There is also issues with Internet access.. but only sometimes.
 
Say I have two terminals open.. one pinging Google and the other pinging one of the 2.4Ghz clients. If I connect to the 2.4Ghz SSID, I get both pings working fine. If I switch to the 5GHz SSID, the macbook gets its IP address but then the Google ping will work but the internal ping just keeps failing. The Internet issue.. looking back on the above example.. sometimes the Google ping will also fail. The mac also sometimes indicates that there is no Internet connection behind the wireless connection when this happens.
 
When I connect on the 5Ghz SSID, I get my LAN IP address from the router (ifconfig). I can also see the /etc / resolve.conf correctly populated on the macbook with thge gateway and DNS settings.For now, I'm just going to get them to only use the 2.4Ghz SSID and assume that a later release of the softeware will fix things.. it could be a compliance issue on the Apple/Cisco N support.

View 9 Replies View Related

Linksys Wireless Router :: 5GHz Radio Channels Available On EA4500

Jul 17, 2012

What Radio Channels are available for selection when operating the EA4500 in Wireless-N (5 GHz) mode only? I need to find a router that can be specifically set on channel 120 in the UK

View 8 Replies View Related

Linksys Wireless Router :: Disabling 5GHz Band On E3000

Jul 17, 2011

I've had the wireless G adapter for a year now, and connections work with both 2.4GHz and 5GHz G connections. I just bought a wireless N adapter (2.4GHz and 5GHz capable), and cannot get an N connection.. On 2.4GHz it connects to G only. And on 5GHz, I don't even see the whole band to connect to it.
 
I've tried disabling the 5GHz band on the E3000, then even setting the 2.4GHz band to no security. I still get a G only connection.My laptop can connect to 2.4GHz and get 144Mbps N speeds.Router is at latest firmware.I've researched this online, but can't find anything concrete.

View 7 Replies View Related

Linksys Wireless Router :: Cannot Get Internet Connection With E4200 V2 In 5Ghz

Jan 28, 2012

I setup my E4200 v2 with different SSID's for 2.4 and 5GHz modes. I have no problem with a 2.4 Ghz connection on my laptop, but I cannot connect to the internet in 5GHz. mode. I choose the 5 GHz SSID and enter the passphrase but no luck, even though I have a full 4 bars inthe wireless icon. 

View 4 Replies View Related

Linksys Wireless Router :: E2500 5ghz Ssid Not Visible?

Dec 25, 2012

None of my wireless devices (Windows, iphones) can see the SSID from the 5ghz channel on my E2500. I have updated the firmware and reset the router to factory defaults. Still  not visible. The router is set up to broadcast the SSID under wireless settings. Also, selecting "other" under iphone>settings>wifi and entering the SSID name and password gets "could not find the network (ssid)". This was working until a couple of days ago Comcast power cycled the router to make sure my cable modem was working.  Now nothing.

View 2 Replies View Related

Linksys Wireless Router :: Does The E3000 Support 5GHz Channels

Jul 23, 2011

I have read various forum postings saying to get the best performance from a wifi router you have to use channel 149 or greater and that 36-48 have a weaker signal strength and thus less range/speed.I live in New Zealand and when I select the wireless channel drop list for the 5GHz band it only lists 5 options - Auto (dfs), 36, 40, 44 and 48. I have read forum posts of people stating you should switch to 149 or greater and I have seen screenshots showing the drop list with 149 selected. But I don't have that option.If I check the Status > Wireless page it shows that channel 36 is being used (for Auto).Am I doing something wrong? Do E3000's in this part of the world not support 149 etc?I spoke in a live chat to a support rep who told me that all E3000's are the same everywhere in the world and there was little to no difference in firmware between them. I was also told that channels 36-48 are high gain channels and so there is no need for the other channels, which contradicts other articles I have read which state 36-48 are weaker channels.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 14, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072,how to add 149,153,157,161 channels.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Keep Connected To 5ghz Signal / Router Doesn't Respond To It

Jul 10, 2011

U just bought a new E4200 router to enjoy 5ghz band for the first time.I noticed the range at my house of the 5gh is smaller than 2.4 is that right?one of my pc is having trouble keep connected to the 5ghz signal or the router doenst respond to it, is there a way to improve that signal?

View 2 Replies View Related

Linksys Wireless Router :: Set Up E3200 As WAP?

Aug 3, 2012

Trying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address

View 3 Replies View Related

Linksys Wireless Router :: E2500 2.4Ghz Won't Connecting At 5GHZ Frequency

Feb 23, 2013

On my dual band E2500, I have both the 2.4 and 5 GHZ enabled. I have a fairly new HP with an N wireless card but I cannot get it to connect at the 5GHZ frequency. The only computer that will connect at the speed is my wife's with an external Cisco wireless card. What the settings should be on the PC in order to get it to connect at the higher frequency?

View 4 Replies View Related

Linksys Wireless Router :: E4200 (v1) 5Ghz Disconnects When Running Speedtest?

Feb 15, 2012

I have an e4200 set up using a trendnet TEW-684ub.  Connection on 2.4Ghz and 5Ghz seems fine, but when the 5Ghz network is under load, such as running speedtest, the network drops for a second.  This does not appear to happen on the 2.4Ghz network.
 
2.4Ghz and 5Ghz networks are set to Auto width and channel using WPA2 and I've tried raising the router up a bit to increase airflow to try to eliminate overheating as a possible issue.  I'm also running the latest firmware...1.0.0.3, I believe.

View 5 Replies View Related

Linksys Wireless Router :: E4200v2 5ghz Network / Connection Timeout

Feb 29, 2012

I was able to connect to my 5ghz and 2.4ghz networks just fine. Now today I get a message that the connection timed out whenever I try and connect to the 5ghz. I have done a 30/30/30 reset, and still no joy. The one thing I haven't done yet is a 30/30/30 with a configuration from scratch. I will probably try that later. I've done the usual things like change the channel and all that, still no go. Other things I've done, change the network name, change the MTU, restart my machine. However, this is happening on other devices as well. The 2.4ghz network, solid as a rock.

View 1 Replies View Related

Linksys Wireless Router :: Xbox / PC Can't Connect To 5gHz Network (E4200 V2)

May 24, 2012

My network is discoverable, but my machines will not connect (they were connected previously).  They can connect to the 2.4gHz network, but not the 5 (I use the 5 for streaming media and gameplay).  Windows 7 says it's unable to connect.

View 8 Replies View Related

Linksys Wireless Router :: E2500 Unable To See 5GHz Channel SSID

Jul 1, 2012

I've recently purchased the E2500, done the setup but am facing some issues.I'm unable to see the 5GHz channel SSID, I can only see the 2.4GHz channel SSID.Have tested all the laptops and devices at home and all can't see the 5GHz channel.The list of devices are:
 
a) iPhone 3GS
b) iPhone 4G
c) iPhone 4GS (some sites says it doesn't support, some says it does, I'm confused as a result)
d) Samsung laptop
e) Dell laptop
f) Momo11 Little Bird Edition tablet (Made in China [MIC])
g) No name MIC tablet
 
Secondly, is there any tips / tricks to tweak the modem to increase the internet speed?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved