D-Link DAP-1522 :: How To Enable 5Ghz Band
Oct 13, 2011I installed my 1522 today with a Direct TV receiver and made a connection using AP mode.
How do I know what band is being used and how to switch between the bads.
ADVERTISEMENT
D-Link DAP-1522 :: What Is 5GHz Antenna Orientation
Nov 22, 2008What is the 5GHz antenna orientation in the DAP-1522? If I want to get the best signal for streaming to a DSM-750 how should I orient the the DAP-1522? Horizontal? Vertical? and which edge towards the media player?
It's working but the access point only reports about 50% signal strength over 20 feet (and only 1 wall) so I would have expected better. I've tried turning the box a couple of different ways but didn't see any big difference in the reported signal strength.
D-Link DAP-1522 :: Bridge With A Linksys E4200 5ghz Network?
Nov 16, 2011I Recently purchased the DAP1522 to use as an entertainment bridge for my xbox 360, BR player and dish network receiver I also upgraded my router a WRT5GS running tomato to a Linksys E4200 going from G to N while i had my Xbox and BR connected wireless I didn't have the Dish receiver hooked up so i thought by using the DAP i would be upgrading my network and connecting my Dish receiver no brainier right and everything works so far.But here's the question with all the hype of the benefits of the 5ghz channel , well it's not hype it certainly makes sense but from what I see the products have to be compatible shouldn't what I'm connecting be compatible they say your gaming console specifically and streaming movies i would think . Any configuration tips I read somewhere that with an E3200 router they had to set the 5ghz channel to like 37 for the DAP to see that channel its all getting a little overwhelming here's whats in the house A Mac Power PC pre Intel using a Asus NB13 USB 2.4ghz its the only thing i could find with speeds over 100Mbps A windows 7 machine hardwired gig connection another windows 7 pc downstairs hardwired a netbook with a wireless connection and lastly a DECT 6.0 phone system who knows what interference these produce.
View 1 Replies View RelatedD-Link DIR-825 :: Set Up 5Ghz Band?
Jan 1, 2012I just bought the D-link router DIR-815. I set both bands on but when I connected the blue-ray disk for streaming Netflix movies it connected on the 2.4 Ghz. How do I set up the 5Ghz band?
View 3 Replies View RelatedD-Link DAP-1522 :: Get Stunning 5% Signal On 5 GHz Band
Sep 11, 2011I am still trying to get the DAP-1522 to perform well together with the DIR-855, but so far I think the DAP-1522 is a piece.When setting up the DAP-1522 in bridge mode I get stunning 5% signal on the 5 GHz band and 65% on the 2.4 GHz band. Speed is for both bands under 20 Mbps.At the same time, a laptop from Asus gets 100% signal and 130 Mbps right away.I am VERY disappointed with the DAP-1522. Save your money and the hazzle.
View 9 Replies View RelatedD-Link DIR-825 :: PS3 Won't Accept Or Recognize DWA-160 Or 5GHz Band
Dec 2, 2011Have hooked up a DIR-825 to an iMac and it works well on 2.4GHz band. Having issues seeing 5GHz band as it comes and goes. Just today bought a DWA-160 USB adapter hoping it would connect the kid's PS3 to the 5GHz band but the PS3 wont accept or recognize either the DWA-160 or the 5GHz band.
Can't find any solutions in the manuals.Desperate for a fix as the wife and I want to be able to work on the 2.4GHz without being constantly kicked off by the kids on the PS3.
D-Link DAP-1522 :: How To Enable JTAG Mode On DAP-1160
Jan 24, 2011I have a dead DAP-1160 (RTL8186). I would try the JTAG recovery, so I compiled
-) includes-0.4.2
-) readline-5.2
-) jtag-0.6-cvs-20051228
under ubuntu 10.10.I have the cable DLC5 Xilinx.The problem is: I do not know how to enable the JTAG mode on the DAP-1160.I understand that I must set a pin on the 147 on the RTL8186. but I have no idea where is on the DAP-160 PCB.
Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?
Apr 14, 2010I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedTP-Link Dual-Band Wireless :: Low Signal Range From WDR4300 Router On Both Bands And Especially On 5Ghz
Mar 24, 2013Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n
I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.
TP-Link Dual-Band Wireless :: TL-WDR4300 Unable To Enable Ftp Over Internet
Feb 15, 2013Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : : 3.13.17 Build 120426 Rel.29216n
ISP : Sky
I am trying to setup my ftp site.My internet address appears as FTP Server Configuration
Server Status: Started
Internet Access: EnableDisable
Service Port: (The default is 21, do not change unless necessary.)
Internet Address: 192.168.0.3
How does my ftp site get active, it keeps the 192.168.0.3 address.I have enabled and saved hoping this will allow it, but no joy.
3x3 Wi-Fi Antenna For 802.11n 5GHz Band?
Apr 30, 2012find a 3x3 (450mbps) WiFi antenna for the 802.11n 5GHz band? I'm pretty much looking for something similar to this, which works at 2.4GHz:
[URL]
I've done a considerable amount of searching and have not been able to come up with anything. Individual 5GHz dipole antennas can be bought online, but these would be a sub-optimal solution for me, as I would like the antenna to have a solid base so it can sit on the desk/bookshelf.Edit: Found a Proxim antenna that claims to be dual-band, but it's pricey. Also claims to use reverse SMA connectors, so should work with desktop WiFi cards or mini PCIe cards with pigtails.[URL]
Dlink DIR-825 5ghz Band Not Visible
Mar 5, 2012I've had the DIR-825 router for more than a year now and I've never once been able to see the second SSID that broadcasts at 5Ghz. I've set up both bands with identical settings and I have a wireless N network adapter in my laptop, but it only ever sees the 2 Ghz SSID, never the 5 Ghz one. Shouldn't I be able to see it?
View 3 Replies View RelatedNo Internet Access On 5Ghz Band With Dlink Router
Mar 3, 2013Until recently I used the 2.4GHZ band for my pc and my son used 5GHZ for his laptop on our D-link router.A couple of weeks ago our provider installed a new Cisco modem/router-in-one (the old modem didn't work any more). We use the D-link as a second router. The 2.5Ghz band is no problem but my son doesn't get internet access with 5Ghz
View 3 Replies View RelatedLinksys Wireless Router :: E3000 5Ghz Band Seen By Mac But Not PC
Nov 23, 2011Wednesday, November 23, 2011I have an Airport Extreme dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell E5520 it will see both networks. On an iPhone 4 it will see both networks. I can connect any of these devices to either network.Just got the Linksys E3000 dual-band 2.4Ghz and 5Ghz. Each network is has a different name and different password so I know exactly which one I am connected to.On a MacBook Pro, it sees both networks. On a Dell it will only see the 2.4Ghz network. On an iPhone 4 it will only see the 2.4Ghz network.The Airport Extreme is powered off when using the E3000 so I know there is no interference from this router.E3000 Firmware Version 1.0.04. It's the latest.5Ghz Wireless Settings Network Mode: Mixed Channel Width: Auto (20Mhz or 40Mhz) Channel: Auto (DFS) 2.4Ghz Wireless Settings Network Mode: Mixed Channel Width: Auto (20Mhz or 40Mhz) Channel: Auto (DFS)Did not mess with any other settings. I have rebooted the computer, cycled the router and modem 3-4 times.Nothing works.My question is since both laptops and phone can see the 5Ghz network when running the Airport Extreme, why doesn't the 5Ghz network show up on the Dell and iPhone when running the E3000.
View 5 Replies View RelatedBelkin Routers :: Turning Off The 5Ghz Band On N750 DB?
Jun 4, 2013Is it possible to turn off the 5Ghz signal on a Dual Band Router N750 DB (F9K1103v1)?
View 1 Replies View RelatedLinksys Wireless Adapters :: AE3000 How To Switch To 5GHz Band
Dec 15, 2012just got my AE3000 today. It's working fine. The box says "2 GHz or 5 GHz" but there are no instructions on how to select one or the other. I don't even know which it is using. How do I set this? I'd like to make sure it's on the 5 GHz band.
View 1 Replies View RelatedLinksys Wireless Adapters :: WMP600N Won't Connect To 5GHZ Band?
Nov 3, 2011I have a WMP600N in my desktop (win7 x32) and I just got a new router (e2500). I put it on 5ghz only and it won't even pick up the signal. My laptop connects without any problems. It has a Intel Centrino Advanced N 6200. When I go to the properties it only has a short list of things. I also have XP and more options come up.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 - Unable To Go To 5Ghz Band
Oct 23, 2011Router: E4200
Router Firmware: 1.0.03 (Latest FW)
Why I cannot go to the 5Ghz band to utilize the superior speeds to transfer files over wireless connection between my computers? I am sure that I am still on the default 2.4 Ghz because
1) The file transfer speeds are pathetic
2) In Wireless Security, if I set the Wireless Mode to disabled for the 2.4Ghz band, Windows shows me "Unsecured Network" even with 2.4Ghz disabled.
Linksys Wireless Adapters :: How To Select 5GHz Band For AE1000
Mar 4, 2011The product literature for the AE1000 says that you can select which band to use. However there doesn't seem to be an option to do that. I have an E4200 and when I set it up, it assigned my 5GHz and 2.4GHz bands the same SSID. If I configure the AE1000 to connect to that SSID, it seems to connect to the 2.4GHz band. Do I have to change the SSID for 5GHz and initiate a connection to it manually?
View 9 Replies View RelatedLinksys Wireless Router :: E3200 / Can't Connect To 5Ghz Band
Apr 15, 2012I'm using a Linksys E3200 router with a Motorola modem and an elite xbox 360 with a wireless N networking adapter. (Black with two antennas.) I just recently bought this router because I wanted some faster gaming. I wanted to put my xbox on the 5ghz so it would have it all to itself, and have the two laptops share the 2.4ghz. But it won't let me onto the 5ghz band... I can see it on my xbox but it won't connect to it at all. I can get onto the 2.4 band but its at 802.11G, so its not even giving me N there, when it should be. I'm not sure if this is an issue with my adapter or router...I tried finding stuff about it, and it looked like people were blaming it on linksys, but that was almost a year ago. And there was never an update on what happened.I can see the 5Ghz band on my xbox (but only if the channel width is on 20Mhz only), but I can't find it on my computer. Which I find weird. I've been trying a lot of things and I just can't get my laptop to find it. So nothing is using the 5 band, and all my devices are crowded onto the 2.4...Is there some step in setting up the 5Ghz band that I'm missing maybe?
View 4 Replies View RelatedLinksys Wireless Router :: E4200v2 Can't Seem To Access 5ghz Band
Jan 19, 2013I have an E4200 V2. The 2.4ghz and 5ghz bands are both enabled and named differently. From what I've read they should both show up in the list of networks when I'm connecting other computers etc? All I'm getting is the 2.4ghz.Everything on the router is working fine as far as I can tell, just can't seem to access the 5ghz band. Maybe I recently upgraded to the Smart WiFi firmware but it's the same situation.The two bands have the same password with two of the first three letters switched on one.
View 3 Replies View RelatedBelkin Routers :: AC900 - Can't See Broadcast Ssid For 5ghz Band
Dec 29, 2012F9K117 - I can't see my broadcast ssid for the 5ghz band. Is there anything I can do?
View 3 Replies View RelatedLinksys Wireless Router :: Disabling 5GHz Band On E3000
Jul 17, 2011I've had the wireless G adapter for a year now, and connections work with both 2.4GHz and 5GHz G connections. I just bought a wireless N adapter (2.4GHz and 5GHz capable), and cannot get an N connection.. On 2.4GHz it connects to G only. And on 5GHz, I don't even see the whole band to connect to it.
I've tried disabling the 5GHz band on the E3000, then even setting the 2.4GHz band to no security. I still get a G only connection.My laptop can connect to 2.4GHz and get 144Mbps N speeds.Router is at latest firmware.I've researched this online, but can't find anything concrete.
Linksys Wireless Router :: EA3500 - Printer Cannot Handle 5ghz Band
May 5, 2013Just upgraded to the EA3500 router and realized my wireless printer can not handle the 5ghz band.If I have the pc on the 5 ghz and the printer on the 2.4 they won't communicate correct?
View 2 Replies View RelatedLinksys Wireless Router :: EA4500 Connection To 5Ghz Band With Separate SSIDs?
Apr 11, 2012I set up my new EA4500 last night, and configured the 5Ghz and 2.4Ghz bands with separate SSIDs (as recommended). While I can see the 2.4Ghz band with all of my devices, I cannot see the 5Ghz band with any of them.I followed the advice given (including the settings shown) on the EA4500 FAQ.Title: Personalizing and connecting to the 5 GHz wireless band on a Linksys Wireless-N routerArticle ID: 21466.Did that *multiple* times, and still nothing. I do have a dual-band capable adapter (Netgear RangeMax WNDA3100 Dual Band Wireless-N Adapter) that I know works on 5Ghz (because I had it working on my old dual-band WDNR3700v1). Similarly, I have PCs sitting less than 20 feet away that were previously able to see the 5Ghz band on my old router, but are now unable to see it on the EA4500.
View 9 Replies View RelatedTP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?
Apr 2, 2013Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
Cisco Wireless :: WLC 5508 / Is Band Select Is Enable By Default On 7.2.110
Sep 27, 2012I have several WLC 5508 with 7.2.110 firmware. My questions are:
(1) Is band select is enable by default on 7.2.110?
(2) All the variables settings on the band select, how do I set it up to make 5 ghz more preferable than 2 ghz?
D-Link DIR-825 :: No Link Between 5ghz Clients And Wired Lan
Mar 20, 2012I have a dir-825 and wireless clients connected on the 5ghz ssid can see clients on 2.4 ssid and also out to the WAN (internet) but can't see any clients (my NAS ) connected to the dir-825 wired lan.2.4 ghz clients see everything fine. same with clients connected through the wired lan. I've tried DHCP and static ips. no idea what to do next.I was originally on 2.02 fw and have tried 2.03, 2.05 and now 2.06I'd really like to keep the 5ghz on because I have an AP by my tv and several devices connect from there to stream from the NAS.
View 2 Replies View RelatedD-Link DIR-825 :: No Link Between 2.4GHz And 5GHz Clients?
Dec 15, 2011How come my 2.4GHz client can't see my 5GHz client? Shouldn't they be visible through the DIR-825 router?
View 1 Replies View RelatedD-Link DAP-1522 Not Connecting
Mar 10, 2013My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.
View 6 Replies View RelatedD-Link DIR-825 :: DIR-835 5GHz Not Working
Mar 14, 2013The 5 GHz has been working for 2 months but now, no longer available. No visible 5GHz wireless network. Reset to factory setting and reinstalled but still no 5 Ghz. The 2.4Ghz is working fine.
Location Australia
fcc id: KA2IR835A1
IC: 4216A-IR835A1
P/N: IIR835NAU...A1E
S/N: QBKA1C5001387
WPS PIN: 24784784023
H/W Ver: A1 F/W Ver: 1.01
D-Link DAP-1522 - Unable To Log On After Network Changes
Sep 30, 2011I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).
View 5 Replies View RelatedD-Link DAP-1522 :: Not Connecting To DIR-815 Properly?
Apr 26, 2011My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
