D-Link DIR-825 :: No Link Between 2.4GHz And 5GHz Clients?
Dec 15, 2011How come my 2.4GHz client can't see my 5GHz client? Shouldn't they be visible through the DIR-825 router?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: AP541 / Establish WDS-connection On 5GHz And Connect Clients On 2.4GHz?
Sep 27, 2011Is it possible to establish the WDS-connection on 5GHz and connect Wireless-Clients on 2,4GHz with these Acces-Points?There are some threads concerning performance-issues in combination with WDS on 541 - any news on this with the actual software-release?
View 1 Replies View RelatedD-Link DIR-825 :: No Link Between 5ghz Clients And Wired Lan
Mar 20, 2012I have a dir-825 and wireless clients connected on the 5ghz ssid can see clients on 2.4 ssid and also out to the WAN (internet) but can't see any clients (my NAS ) connected to the dir-825 wired lan.2.4 ghz clients see everything fine. same with clients connected through the wired lan. I've tried DHCP and static ips. no idea what to do next.I was originally on 2.02 fw and have tried 2.03, 2.05 and now 2.06I'd really like to keep the 5ghz on because I have an AP by my tv and several devices connect from there to stream from the NAS.
View 2 Replies View RelatedCisco Wireless :: AIR-CAP3502I Run Both 2.4Ghz And 5Ghz Simultaneously?
Jan 28, 2013Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal?
View 4 Replies View RelatedCisco Wireless :: AIR-LAP1142N-E-K9 Will Support 2.4GHz And 5GHz Or Not?
Jun 4, 20121142N-E0K9 will support both 2.4 and 5 ghz or only 2.4 .
View 4 Replies View RelatedCisco Wireless :: AIR-LAP1242AG-E-K9 / 5GHz Antennas On 2.4GHz Radio?
Jul 16, 2012We ordered 2 Cisco AIR-LAP1242AG-E-K9 Wireless Access Points with 4 AIR-ANT5135D-R antennas.We accidentally ordered the 5GHz antennas instead of the 2.4GHz antennas.Would it be possible to use the 5GHz antennas as 2.4GHz antennas?If so, are there any down sides to it?
View 15 Replies View RelatedLinksys Wireless Router :: E2500 2.4Ghz Won't Connecting At 5GHZ Frequency
Feb 23, 2013On my dual band E2500, I have both the 2.4 and 5 GHZ enabled. I have a fairly new HP with an N wireless card but I cannot get it to connect at the 5GHZ frequency. The only computer that will connect at the speed is my wife's with an external Cisco wireless card. What the settings should be on the PC in order to get it to connect at the higher frequency?
View 4 Replies View RelatedLinksys Wireless Router :: E3000 - How To Get Info About Usage 2.4ghz Or 5ghz
Mar 19, 2011How do I know if I'm using 2.4 or 5ghz? I would like the laptop and ps3/net flix to use the 5ghz and everything else to use 2.4ghz. I used the e3000 CD fro the setup. When I was at the last part of the setup, when it gives you a ssid name and password. I deleted it and typed in a name that I could remember. I clicked the button for the next step and everything was complete. I also received another name for guest to use the computer. The e3000 setup just game me some wild name like running water.
I would like to know since I have two different names, which on e is using 5ghz and which one is using 2.4thz? Can you tell me if the e3000 automatically have the first name use 5ghz and the guest just 2.4ghz on the second name?
Cisco Wireless :: Setup 2.4Ghz / 5Ghz SSID At Same Time Using One AP541N-E-K9?
May 6, 2013I'd like to set up a 2.4Ghz and a 5Ghz SSID at the same time, using one Cisco AP541N-E-K9. But I can't figure out any way to do so.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 2.4Ghz Network Drops Connection 5Ghz
Oct 15, 20112 days ago my e1000 died, so I went big and bought the e4200 (due to newness, its already loaded with Firmware 1.0.03 build 14) to aleviate my networking woes. I'm running into an issue where I'm utilizing both the 2.4Ghz bands and the 5Ghz band. My desktop as an AE1000, and I'm utilizing that on the 5Ghz band. Everything else in the house (Dell laptop, 2x iPhone 4 and an HP printer) are all connecting to the network wirelessly.
I have had 0 network issues with regards to my wired connections, or my 5Ghz connection. But my 2.4Ghz connection will continuously be unavailable. I have both bands set to brodcast, they have different names so my AE1000 can connect via 5Ghz band. Both yesterday evening, and this morning, my phones, laptop and printer cannot connect, and for the most part, the network doesn't show up on available networks. When it does show up, the devices can't connect.I'm proficient enough to do the general home networking, but I'm at a loss as to how to fix this, without a daily reboot of the router (which seems excessive and unwarranted for a 2 day old e4200 [or any router to be honest]).
Cisco Wireless :: 1142 / 5508 - User Switching Every Few Minutes Between 2.4ghz And 5ghz?
Aug 20, 2012This first started when a user said they were getting disconnected and reconnected a few times a day to our wireless network. He is in a remote office with a 1142 which is set to H-Reap talking back to our 5508. Our WLC is running 7.0.166 The laptop has an intel ulitmate 6300agn wireless card with the latest 15.x drivers.
We are using an SSID with wpa2 and 802.1x auth back to our ACS server using PEAP with our windows credentials.attached is what i am seeing on the wcs troubleshooting page.When i do a debug client on the WLC i see many reauthentications coming from the client on the different radio.
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c Reassociation received from mobile on AP 0c:85:25:f3:7d:40
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c 10.24.8.108 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1621)
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c Applying site-specific IPv6 override for station 00:24:d7:d1:16:6c - vapId 512, site 'VH-GasWorks', interface 'management'
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c Applying IPv6 Interface Policy for station 00:24:d7:d1:16:6c - vlan 2, interface id 0, interface 'management'
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c Applying site-specific override for station 00:24:d7:d1:16:6c - vapId 512, site 'VH-GasWorks', interface 'management'
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c 10.24.8.108 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1621)
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c STA - rates (8): 140 18 24 36 48 72 96 108 48 72 96 108 0 0 0 0
*apfMsConnTask_2: Aug 22 12:59:36.762: 00:24:d7:d1:16:6c Processing RSN IE type 48, length 38 for mobile 00:24:d7:d1:16:6c
[code]....
Now this may be not be the issue thats causing our dropouts a couple times a day as this is happening every 5 mins.
Protocols / Routing :: D-Link 802.11g/2.4GHz Wireless Broadband Router Is Not Turning On?
Nov 18, 2012My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies View RelatedTp-link Dual-band Wireless :: Tl-wdr4300 4300 Refuses To Use Two 2.4ghz For Wifi
Mar 28, 2013Region : Australia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Optus
I note that my 4300 never uses two channels in 2.4 GHz wireless n mode as reported by Inssider. I can see a few other routers on Inssider, one of which uses channel 11+7 ALL the time, though it's not a TP-Link router. Mine sometimes will connect to two channels, thus enabling 300 Mbps, but then quickly drops to 1 channel. I believe this is a firmware fault as I only have 3 or 4 routers in the area of my house and I can't believe this would generate sufficient interference to force the router to run at a lower speed. If the router does behave this way by design, then TP-Link should stop advertising it as a 300 Mbps router as it will almost never operate at that speed.
D-Link DIR-825 :: Set Up 5Ghz Band?
Jan 1, 2012I just bought the D-link router DIR-815. I set both bands on but when I connected the blue-ray disk for streaming Netflix movies it connected on the 2.4 Ghz. How do I set up the 5Ghz band?
View 3 Replies View RelatedD-Link DIR-825 :: DIR-835 5GHz Not Working
Mar 14, 2013The 5 GHz has been working for 2 months but now, no longer available. No visible 5GHz wireless network. Reset to factory setting and reinstalled but still no 5 Ghz. The 2.4Ghz is working fine.
Location Australia
fcc id: KA2IR835A1
IC: 4216A-IR835A1
P/N: IIR835NAU...A1E
S/N: QBKA1C5001387
WPS PIN: 24784784023
H/W Ver: A1 F/W Ver: 1.01
D-Link DIR-825 :: Performance Better Than 655 In 2.5ghz Only Mode
Jun 14, 2012We've been using an 655 in an NGO office that has grown to 20+ computers in two buildings (next to each other). The 655 doesn't seem to be handling that many clients very well so I want to get another one (perhaps a more powerful unit). We will stay operating on 2.5Ghz, have one of the units act as an AP in the other building (too bad we can't bridge with these). Most of the router activity is LAN based (server, etc). Our Internet connection is only 256kbps satellite (and is proxied first through the server). But the LAN performance is not good when many clients are active and some services on the router will freeze and require reboot several times a week, assuming b/c it's overtaxed.
1. know if the 825 will perform better in in 2.5ghz only mode than the 655? Seems that it has more RAM. Newer processor too? The tests I saw online showed that the 655 outperformed the 825 in simultaneously connections, but I assume that was probably in dual mode. I want to know if the 825 will be better in 2.5ghz only mode. We won't need 5ghz mode.
2. Is there another newer DLink I should consider that would provide better capacity and throughput on 2.5ghz only? However, it is ciritical that we keep the same feature set for security (IP based access control rules to various IP ranges on the Internet).
3. It would be awesome if some DLink supported even more sources and/or destinations per access control rule. We use these extensively and the 655 B1 2.01 build has several bugs for access control rules. Is there any DLink that has more robust access control or is it about the same for all?
D-Link DAP-1522 :: How To Enable 5Ghz Band
Oct 13, 2011I installed my 1522 today with a Direct TV receiver and made a connection using AP mode.
How do I know what band is being used and how to switch between the bads.
D-link Dir-825 :: Connect To 5ghz Wifi Through Xbox?
Aug 8, 2011How i can connect to my 5ghz wifi through my xbox ?
View 5 Replies View RelatedD-Link DIR-825 :: Connect PS3 To 5ghz For Online Gaming?
Mar 11, 2011i have a d-link Dir-825 (Hardware Ver. B1/Firmware 2.02NA) and i wanna connect my ps3 to the 5ghz for online gaming but i cannot find the option for it. also when scanning on my iPod Touch and PS3 for a wireless connection i cannot find the SSID that i named for 5ghz and the only one that shows up is the other SSID i named for 2.4ghz.(both SSID are not the same name). is it really worth switching from 2.4ghz to 5ghz?
View 4 Replies View RelatedD-Link DIR-825 :: PS3 Won't Accept Or Recognize DWA-160 Or 5GHz Band
Dec 2, 2011Have hooked up a DIR-825 to an iMac and it works well on 2.4GHz band. Having issues seeing 5GHz band as it comes and goes. Just today bought a DWA-160 USB adapter hoping it would connect the kid's PS3 to the 5GHz band but the PS3 wont accept or recognize either the DWA-160 or the 5GHz band.
Can't find any solutions in the manuals.Desperate for a fix as the wife and I want to be able to work on the 2.4GHz without being constantly kicked off by the kids on the PS3.
D-Link DAP-1522 :: What Is 5GHz Antenna Orientation
Nov 22, 2008What is the 5GHz antenna orientation in the DAP-1522? If I want to get the best signal for streaming to a DSM-750 how should I orient the the DAP-1522? Horizontal? Vertical? and which edge towards the media player?
It's working but the access point only reports about 50% signal strength over 20 feet (and only 1 wall) so I would have expected better. I've tried turning the box a couple of different ways but didn't see any big difference in the reported signal strength.
D-Link DIR-825 :: 2.5ghz Not Working / Why Time And Date Keeps Changing
Jul 17, 2011I have a DIR-825 router connected to my cable modem. The 2.4ghz constantly goes down but not the 5.0ghz. Our wireless devices will see the connection but we are unable to connect.We only have one device that uses the 5.0 and multiple devices that use the 2.4 and none of them can connect.I am currently running firmware 2.02. I also notice that the time changes and I have to reset the time/date.I have tried rebooting the device, resetting the router, changing the network key, updated the time/date, renewed the DHCP...I don't know why it keeps going down, why the time/date keeps changing, and why I cannot get the 2.4 working.
View 13 Replies View RelatedD-link Dir-825 :: 5ghz Wifi Drops During Heavy Load
Apr 21, 2013Hardware Version: C1
Firmware Version: 3.00
Wired works normally, and wireless is otherwise stable, except when under heavy load. E.g. if I initiate a large TimeMachine backup over wifi to my NAS, it will fail and the wifi will drop requiring a power cycle.I have tried a similar transfer over ethernet (~1.7Tb) and although the transfer speed wasn't great (~10MBs, likely due to NAS drive bottleneck), it completed without a problem.
If I try copying ~150Gb over wifi, however, it barely lasts 30 minutes without dropping out.Once the wifi drops, it still connects, but nothing works (I am unable to even connect to the web interface using the local IP). Other devices connected already via ethernet or 2.5Ghz still function normally, but the 5Ghz just fails, and if I try initiating a new connection to the 2.5Ghz it doesn't work until I power-cycle the router.As far as overheating goes, I'm not sure it is an environmental issue... I have the router standing upright in an open space so there is good airflow around it.
D-Link DAP-1522 :: Bridge With A Linksys E4200 5ghz Network?
Nov 16, 2011I Recently purchased the DAP1522 to use as an entertainment bridge for my xbox 360, BR player and dish network receiver I also upgraded my router a WRT5GS running tomato to a Linksys E4200 going from G to N while i had my Xbox and BR connected wireless I didn't have the Dish receiver hooked up so i thought by using the DAP i would be upgrading my network and connecting my Dish receiver no brainier right and everything works so far.But here's the question with all the hype of the benefits of the 5ghz channel , well it's not hype it certainly makes sense but from what I see the products have to be compatible shouldn't what I'm connecting be compatible they say your gaming console specifically and streaming movies i would think . Any configuration tips I read somewhere that with an E3200 router they had to set the 5ghz channel to like 37 for the DAP to see that channel its all getting a little overwhelming here's whats in the house A Mac Power PC pre Intel using a Asus NB13 USB 2.4ghz its the only thing i could find with speeds over 100Mbps A windows 7 machine hardwired gig connection another windows 7 pc downstairs hardwired a netbook with a wireless connection and lastly a DECT 6.0 phone system who knows what interference these produce.
View 1 Replies View RelatedCisco Wireless :: 5GHz PtP Link With 2600e Access Points
Apr 10, 2013In the old days I used two autonomous 1242AG access access points to create a 5GHz PtP link with 2 patch antennas (over small distance 50meters and on on private premises) to connect an small building or garage were there was no ethernet availible. and used the 2.4GHz radio to serve clients in the small building area, worked great.
Can I use the same setup with the 2602e access points? If so, would I be able to use them controller based? Can I connect a switch/or additional access point behind the 2602e (bridge) in the small building/garage? Would that addtitional access point be able to connect and register to the WLC.
TP-Link WDR3600 Gigabit / Wireless Router Set To Work In 5Ghz Only
May 25, 2013I recently modified my home network in hopes of getting faster file transfers between devices. But it looks like something's not right.I'm suing Lan Speed Test and the best performance I get over WiFi is about 44Mbps (avg.). From my laptop to my NAS. If i turn off the WiFi and do the test over a wired connection the best I get is 200Mbps (avg.).
1. AT&T 2Wire cable modem. Internet comes in the house through this box and it's currently set up to be in bridge mode so that the TPLink router handles everything.
2. TP-Link WDR3600 gigabit/wireless router set to work in 5Ghz only, 11an mixed mode.
3. WD My Book Network Storage. Wired gigabit connection.
4. Desktop PC. Wired gigabit connection.
5. Laptop PC. Wireless.
6. 1 ipad v.2, 2 iphone v.5. Wireless.
Current setup:
1. internet cable goes into 2Wire Modem.Wireless on this device is OFF.
2. cable goes from LAN port on modem to WDR3600 router's internet port
3. cables go out from router to Desktop PC and NAS
4. all other devices are connected to the 5GHz wireless network created by the router.
TP-Link Dual-Band Wireless :: Low Signal Range From WDR4300 Router On Both Bands And Especially On 5Ghz
Mar 24, 2013Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n
I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.
Linksys Wireless Router :: E4200 Routing For 5GHz Clients
May 25, 2012I just upgraded my in-laws network from a WRT54G to a E4200. It's working but I'm getting issues with the 5Ghz end. I've got both SSIDs using different names.. so its clear which I'm connecting to. I have a macbook pro which has N support and can see the 5GHz SSID.The issue I get is that when I connect to the 5Ghz SSID, the laptop cannot ping or connect to LAN clients on the 2.4GHz end. This includes SMB shares, a couple of devices with web interfaces and one machine running a VNC server. There is also issues with Internet access.. but only sometimes.
Say I have two terminals open.. one pinging Google and the other pinging one of the 2.4Ghz clients. If I connect to the 2.4Ghz SSID, I get both pings working fine. If I switch to the 5GHz SSID, the macbook gets its IP address but then the Google ping will work but the internal ping just keeps failing. The Internet issue.. looking back on the above example.. sometimes the Google ping will also fail. The mac also sometimes indicates that there is no Internet connection behind the wireless connection when this happens.
When I connect on the 5Ghz SSID, I get my LAN IP address from the router (ifconfig). I can also see the /etc / resolve.conf correctly populated on the macbook with thge gateway and DNS settings.For now, I'm just going to get them to only use the 2.4Ghz SSID and assume that a later release of the softeware will fix things.. it could be a compliance issue on the Apple/Cisco N support.
Cisco Wireless :: AP541N Drops All Clients Unless Radio Set To 5GHz 802.11N
Apr 2, 2012I have an AP541N-A-K9. For the past couple weeks it stops work at 5:00pm. The clients can see the SSID but when they connect it fails. The only way to get this to work again, is to set the radio to 5GHz 802.11N. Setting the radio to anything else does not allow the clients to connect.
I have some older clients so I need this broadcast G as well.
I have upgrade the software to AP541N-K9-2.0(1). Does not make a difference. Reset to Factory defaulst and reconfig does not make a difference. There are no Rouge AP's in the area.
Between the issues these have passing DHCP from a Windows server and now this, I'm thinking these devices are not fully baked.
D-Link DIR-655 :: Only Allows One Or Two Wireless Clients
Oct 29, 2011I have had trouble with my DIR-651 router since i bought it. To put it simply, if there a device connected to the wireless network, no other device can connect. Here are the devices i have:
hp pavilion running fedora 15
hp touchpad (webos)
htc thunderbolt (android)
dell inspiron (? work computer..not here right now) running windows xp
I am running wpa 2 using AES encryption in wireless mixed b/g/n mode (I have tried all other permutations of BGN. On the devices that will let me see error logs, all i get is "authentication invalid" errors.) In a few rare cases, i am able to get a second device connected by disabling the first device, connecting second, and reconnecting first.I am running the newest firmware 1.10NA.
Unknown DHCP Clients In D-link DIR-615?
Aug 2, 2011When I go into the Network Settings, and the end of the page I find a list named "Number of Dynamic DHCP clients: 7". As far as I know, I should only see 4, all 4 laptops; however, I see 2 UNKNOWN entries in this list, and one name "Macondo". Each of these entries have an option (a link) saying "Revoke" and other "Reserve". I am just wonder if these entries are intruders in my home network. What should I do? I am afraid to break my internet connection. By the way, I set up every single one of my family 4 laptops at home with a WPA-PSK using a very long key.
View 9 Replies View RelatedHow To See The Clients Connected To A TP-Link TD-W8960N
Apr 17, 2013I have a TP-Link TD-W8960N Wireless Router. I would like to know what the I.P. addresses of connected clients are (both those connected wirelessly & those connected by Ethernet cable). There are about 6 computers in my network, some have dynamic and others have static I.P. addresses.I am finding it difficult to navigate the router,on which menus get me to the information that I am interested in
View 1 Replies View RelatedD-Link DIR-615 :: Windows Clients Getting DHCP ACK Followed By A NAK?
Jan 6, 2013I've just discovered this thing in Windows Event log. The DHCP-Client log is full with this: the client received a NAK from the DHCP Server. Strangely, they still get the desired IP address. (Which are reserved adresses for the MAC adresses.)So I've looked at the logs in the DIR-615 (rev.D, FW: 4.13), and found this:
View 1 Replies View Related