Linksys Wireless Router :: E2000 - Installing A Wifi Printer On Local Network

Aug 14, 2012

I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network.  Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
 
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: Cisco E2000 Wifi Isolation On Home Network

May 24, 2012

I have a Linksys E2000 router on my home network. The router has the newest version of firmware. Every once in a while, wireless clients on my network become "isolated". Here's an example of what happens. I set up a new wireless printer. I can print to the printer wirelessly from my phone, PC's, etc. all fine after setup. I'm thinking everything is cool!! Well after 2 weeks to 1 month this device will become "isolated" so I cannot print to it; it has an IP address, it can ping its gateway, but i cannot ping it from other devices on the same subnet. I know it's not the printer because if i unplug my E2000 and plug it back in, it works fine. 
 
Another example. I have two windows 7 PC's that are on the same home group and i can share files between them. Sometimes it works and other times it doesnt. I can ping my gateway but they cannot ping each other. I would troubleshoot the issue like crazy from the host end, but the second i unplug my E2000 and plug it back in, BINGO they can talk. Something is wrong with how these routers function with hosts in inter-subnet communications. 

View 2 Replies View Related

Linksys Wireless Router :: E2000 Connecting Only To Local?

Jun 14, 2012

I have a linksys e2000. since recently i am only able to connect to the local network there is no internet access. this is a major issue because i need wireless access.  I am using windows 7.

View 2 Replies View Related

Linksys Wireless Router :: E2000 Local Connectivity

Nov 3, 2011

I am having connectivity problems with my router. I have gone into the router itself at 192.168.1.1, changed settings, reset settings, upgraded firmware to 1.0.04, and / or whatever else was posted by other users. I have also changed my settings for my lappy's networking adapter, re-edited my IP, removed / reinstalled network adapter, and / or whatever else I found to try to do.
 
I am running Vista 32 Home Premium, HP Pavillion dv6700 Notebook, with a Cisco Linksys E2000 Wireless N Router. I have connected a desktop via wireless USB adapter, my android phone, my GF's android phone, her kids iTouch and phones, and when I try to connect via wirelessly to the router, I get local access only with an unidentifiable network, which then limits my access online, (I cannot connect to the internet). It will let me get online via ethernet cable, but not wirelessly. I have bypassed the router and connected directly to the modem without any problems. I have reset the modem and router many times, as well as rebooted my laptop a lot trying to gain some connection. My laptop can connect to other wireless hotspots / access points without any problems.

View 4 Replies View Related

Linksys Wireless Router :: E2000 - Local Connectivity Error

Sep 16, 2012

I have gone into the router itself at 192.168.1.1, changed settings, reset settings, upgraded firmware to 1.0.04, and / or whatever else was posted by other users. I have also changed my settings for my lappy's networking adapter, re-edited my IP, removed / reinstalled network adapter, and / or whatever else I found to try to do. I am frustrated and upset that a wireless problem is giving me so much headache.I am running Vista 32 Home Premium, HP Pavillion dv6700 Notebook, with a Cisco Linksys E2000 Wireless N Router. I have connected a desktop via wireless USB adapter, my android phone, my GF's android phone, her kids iTouch and phones, and when I try to connect via wirelessly to the router, I get local access only with an unidentifiable network, which then limits my access online, (I cannot connect to the internet). It will let me get online via ethernet cable, but not wirelessly. I have bypassed the router and connected directly to the modem without any problems. I have reset the modem and router many times, as well as rebooted my laptop a lot trying to gain some connection. My laptop can connect to other wireless hotspots / access points without any problems.

View 1 Replies View Related

Linksys Wireless Router :: E2000 Internet Access Is Not Affected When Printer Appears To Be Offline

Jun 10, 2011

I've got a Linksys E2000 router and a Brother MFC-7840W wireless printer and they don't seem to want to play nice together.  The set-up process was fine and I can usually print wireless without a problem, but every so often I'll try to print and my computer will say that the printer is offline.  Other computers on my network also show it as offline. The printer confirms it has an IP address, but even after power cycling it won't be picked up by my machines.  I've even tried a full reset of the printer and re-configured it, at which point it is able to successfully obtain an IP address, but it still shows as offline on my PCs. 
 
The only solution I have found is to powercycle the router.  This always works.  Now that's not a terribly inconvenient workaround most of the time, so I've been doing that for a few months now.  It obviously implicates the router as the point of failure, but wireless internet access is not affected when the printer appears to be offline, so obviously some packets are getting through normally. 

View 3 Replies View Related

Linksys Wireless Router :: Can't Find Wireless Printer With E2000

Sep 5, 2011

I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870.  It's been working for months without problems.
 
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device.  I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
 
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba.  I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it.  My Dell in another room connects to the printer no problem.  And I can print to the Canon if I  select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function.  But obviously that means the Dell has to be on so that's not good for much more than troubleshooting.  I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem.  The problem is that Cisco Connect can't find the printer.  It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer.  I've turned any firewalls off for this testing too.
 
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows.

View 7 Replies View Related

Pc Lost Connection With Wifi After Installing A New Printer And Cannot Reconnect?

Jan 8, 2012

went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?

View 3 Replies View Related

Linksys Wireless Router :: Use E2000 As Wifi Bridge?

Mar 9, 2011

After getting informed that I cannot use the AP I bought yesterday as a bridge, I decided to get another linksys E2000, as the guy in the shop informed me that I can run it in bridge mode for sure.Now, as I am doing this for the first time, and my english is not the best, I was not able to find some instructions, or even better a step-by-step manual that can assist me. I searched the forum, but I did not find anything about the E2000 in bridge mode.

View 7 Replies View Related

Linksys Wireless Router :: E2000 Can't Setup To Use Wifi

Jul 29, 2011

i have a E2000 rounter . It's brand new. But i can't setup to use wifi. the software cisco connect can't find rounter. When i plug blue cab from e2000 to my ethernet port on my laptop , icon's network appearen " limit ".

View 3 Replies View Related

Linksys Wireless Router :: E2000 Wifi Slows Down After 20 Feet

Jan 5, 2012

My WiFi is working, but only to about 20 feet then it slows down to almost nothing...

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To Wpa Secured E2000 Wifi

Aug 20, 2012

I have an odd problem where every fortnight to three weeks none of my wifi devices (ipap, laptop, 2x android phones) can connect to my network (Linksys E2000, running firmware 1.0.04 with WPA2 personal).  They can all see the network and try and connect, but all fail.  Rebooting the router has no effect, and the only thing I've found that works is that I have to connect via ethernet cable (which works no problems) and then disable wireless security, save changes, and then immediately reenable wireless security and save changes again.  All my devices then will automatically reconnect no problems. It's a bit annoying as my router isn't ideally placed to dig out the cable, but I wondered if there's any way of diagnosing what could be wrong?  I've checked the router logs and they're not useful - the only thing I can see of note is in the DHCP log in the period when I suspect the problem arose I get 4 entries of discover / offer / request / ack going to 255.255.255.255 which seems unusual.  But the security log is empty so I get nothing from that.

View 8 Replies View Related

Linksys Wireless Router :: E2000 Wifi Ssid Disappears And Won't Connect

Jan 1, 2013

My 'main' Wifi SSID will just disappear and you can't connect to it.  the guest account will still show up.  computers/devices that are already connected will stay connected and will work fine, but anybody reconnecting will not be able to.  Only solution I've found so far is to unplug and replug in my router

View 1 Replies View Related

Linksys Wireless Router :: E2000 Software Can't Find Sonos When Pc Is Connected Through Wifi

Aug 28, 2011

I bought a Sonos multiroom-system, and connected the first player to my E2000 router through Ethernet. It then gets a dynamic address through DHCP, I can see the Sonos within the network when looking in the admin tool of the router.When I start the Sonos controller software on my PC (XP), the software can not find the Sonos when my PC is connected through Wifi.As soon as I connect PC to the router with ethernet cable the Sonos is found immediately and can be initialised. After that, I can disconnect the cable and control the Sonos wirelessly. (as long as I don't close down the controller software for too long)
 
From what I understood from the sonos.com website, the Sonos sends an UPnP multicast signal on port for SSDP on port 1900 for initial connection. Further communications port are described below.Somehow, this multicast package seems not to be transferred into the wireless LAN, only into the wired LAN. Do I have to open some ports, filter some ports?Forward them?

View 2 Replies View Related

Linksys Wireless Router :: How To Retrieve Network Key On E2000

Aug 27, 2012

I want to set up another wireless laptop to access my e2000 but i dont remember the network key, How can I retirieve the key? through cisco connect maybe?

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 Local Management Access Via Wifi

Jan 21, 2012

I just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).Administration > Local Management Access > Access via Wireless ... set to DISABLED. HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.This seems like a black-and-white bug. 

View 9 Replies View Related

Linksys Wireless Router :: How To Set Up Network With E2000 / Ezxs55w And 4 Xboxs

Jun 10, 2012

I'm trying to find out how to set up my network with the e2000, ezxs55w and 4 Xboxs. Problem I am running into is that the NAT error ends up showing on at least two of the xboxs. Before I added the extra two xboxs for my boys, I didn't have any issues. Had to move stuff around and unplugged stuff now I am having problems.  Current connection setup is modem> router> switch. Xbox 1 is wired to switch, NAT type is open. Xbox 2 wireless to router,  NAT type is Strict. Xbox 3 wired to switch, NAT type moderate. Xbox 4 wireless to router, NAT type is strict. How do I set up the network and not have NAT errors on the Xboxs. I'm not to overly worried about Xbox 4, currently due that user not having a Xbox  Live account.

View 2 Replies View Related

Linksys Wireless Router :: E2000 - Set Up Vpn Connection To Home Network?

Aug 12, 2011

i want to set up a vpn connection to my home network.  i see that the e2000 supports ipsec, but does not provide a client. what client can i use to establish a connection?

View 4 Replies View Related

Linksys Wireless Router :: Guest Network And Mac Filtering On E2000?

Feb 12, 2011

Is it true that if someone wants to connect to the Guest network and macfiltering is on this is not possible. Which makes the guest network basicly useless.

View 5 Replies View Related

Linksys Wireless Router :: E2000 To Change Media Network Name

Apr 26, 2012

My router has a main network name (SSID) and media network name (SSID). I know how to change the main network name (SSID) but I don't remember exactly how I can change media network name (SSID).

View 6 Replies View Related

Linksys Wireless Router :: Local Management For E2500 As Wifi Access Point

Jul 19, 2012

I am using an E2500 as an access point, which is working fine. I have an Ethernet cable on one of the LAN ports of the E2500 connected to a LAN port on my gateway router. The LAN address of the E2500 is 192.168.7.3 and the LAN address of the gateway router is 192.168.7.1. Clients on the E2500 wireless network have no problems getting to the Internet through the gateway router. Clients on the E2500 wireless network can reach the E2500 local management port at 192.168.7.3 on port 80. On the gateway router I am forwarding WAN port 8083 to LAN address 192.168.7.3 at port 80. But I cannot access the E2500 local management interface via the gateway router. The E2500 should see the request as from 192.168.3.1 due to NAT in the gateway router, right? I can reach any of my actual access points this way, just not a router being used as an access point. Security/design limitation of the router?

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect Wrt54g2 To Canon Wifi Printer?

Dec 25, 2012

We purchased a Canon MG 3100 printer but am unable to connect.  Have rebooted router but still no joy. 

View 5 Replies View Related

Linksys Wireless Router :: New E2500 Port Light For Wifi Printer Not On?

Aug 18, 2011

I have just upgraded my Linksys router from an older one to the E-2500 about a week ago.  Everything is working great on my wired desktop and 3 wireless laptops except the printer will no longer work from any of the computers.  I've checked the printer wireless settings and they are correct (ssid and password) and it says it's connected to the wlan.  Each of the computers shows the printer is active and set to default BUT the port light on the back of the new router is not on. I have changed cables and still no light, the printer is set up for sharing and it did work a couple days ago but port light was on then.

I have not added anything that wasn't hooked up on my old router, I"m just trying to get what I had on the old router to work on the new one. Everytime I call support, they have me change something that messes up what a previous agent had me do. Now they want me to pay for a direct connection so they can upgrade my router firmware...they didn't even ask what version I already had which happen to be the same version that is available on [URL] so if I had agreed, I would have paid for nothing. I had already paid $29.99 for additional 14 day support on my old router only to find out I needed a new one.

I've been using Linksys routers for quite awhile but I'm just about ready to change brands. I would really like to give this E-2500 a chance.

View 1 Replies View Related

Linksys Wireless Router :: Managing Bandwidth / Users On Home Network With E2000

Aug 13, 2012

I've got the E2000 at home for our private network.
 
We are three guys sharing a flat. We have personal laptops, work laptops, mobile phones, games consoles, tablets etc that connect to the internet.
 
Problem is that when someone downloads stuff, the speed is slow for the rest of us. So i was hoping i could set up something like three "channels" so each of us could have the same download speed, ie 1 mbs each regardless if others are using the network at the same time. And then maybe a guest network for all the mobiles and tablets etc. MAC filtering for access for our personal laptops should work.
 
We have a 20mbit cable network line.
 
Can i do all of this on the E2000 and how?

View 5 Replies View Related

Routers / Switches :: HP C6180 Printer Does Not Print Using Linksys E2000?

Jan 6, 2011

Our office is set up with one desk top and at least two (occasional) laptops, one HP C6180 'all-in-one ' printer, and a Cisco Linksys E2000 router. Internet access for all computers seems OK, but printer seems to only print from one computer, and is inconsistant as to which one it will be. Have tried to shut down then restart printer. Have tried to disconnect and reconnect router, sometimes works, sometimes doesn't.

View 1 Replies View Related

Linksys Wireless Router :: E2000 - Video Stutter With H.264 Over Network Playback In Windows Media Center 7

Aug 4, 2011

I recently replaced my Linksys WRV54G with a Linksys e2000 where I stream H.264 vido in 480p from one computer connected over gigabit to my  Media Center running on Windows 7 64 bit connected at 10/100.
 
Before the router change, I was able to playback video over the network with no problems. If I connect the Linksys WRV54G again, the issue goes away. The Linksys WRV54G does not have gigabit and I have read related issues of video stuttering over gigabit. 

View 4 Replies View Related

Linksys Wireless Router :: Wrt54gs - Shared Hardwired Printer Dropped When Accessed By Wifi Device?

Jul 5, 2011

Win7, wrt54gs,
 
It works sometimes.  I imagine it has a noise problem since sharing files works, internet works.  I cannot remember how to change channels on this router to save my life, though.  What is special about sharing a printer?

View 1 Replies View Related

Linksys Wireless Router :: E4500 Local Network IP?

Oct 31, 2012

E4500 local network IP is 10.10.XXX.XXX and the DHCP server also starts with this subnet. My network is 192.168.XXX.XXX based but if I manually chahge the routers IP I can no longer access it. I do not use DHCP as this is in bridge mode. Why is this setup this way...CCC?

View 1 Replies View Related

After Installing Wireless Printer On Laptop It Doesn't Print

Jan 19, 2012

I've been trying to install our rwireless Hp printer on my laptop. I've had it installed and working, but then it goes offline and won't print. I've uninstalled and reinstalled to no avail. Now it has the error symbol on it (yellow circle withan exclamation mark)

View 4 Replies View Related

HP C7250 Printer Connected To Local Network Gone Offline?

Oct 27, 2011

I have an HP C7250 printer connected to our local network. Both my computer and the printer say it is online. The print que says it is off line. I can't print anything.

View 1 Replies View Related

D-Link DIR-655 :: Can't See Hard-Wired Printer On Local Network

Dec 18, 2010

I recently purchased a DIR-655 and everything's working fine -- Internet access, visibility of local shares, etc. -- with the one except accessing to my printer (Brother MFC-7440N) that's hard-wired to a port on the router.After installing the latest PC SharePort Utility on my two Windows 7 desktops, they're both able to connect and use all of the features of the printer (print, scan, etc.). However, I can't say the same for my two Macbook Pro's connected via WiFi (802.11N).  I installed the latest Mac SharePort Utility on both, but neither can "see" the printer.  Caveat:  If I connect the laptops via a LAN cable (ie. hard-wired directly into the router), they're able to see the printer.  how to configure the router (or Mac) to allow them to see the printer? 

View 9 Replies View Related

Linksys Wireless Router :: E2500 Can't See Other Computers On Local Network

May 1, 2012

I have a E2500 connected to a cable modem as the base of my home network. Hard wire connected to the E2500 is an linksys 8 port hub and a couple of computers. The 8 port hub is connected to a couple of computers and a xbox. I have the hub as a distro point to cut down on wiring. Wirelessly connected to the E2500 are a variety of laptops, netbooks, ipods, an ipad, a playbook, an iphone, a android phone, a wireless printer and a Ps3. Most of the devices are just using the wifi for internet access. Most devices have been setup with their own ip addresses to avoid ip conflicts. The computers and laptops/netbooks are running either Windows XP, Windows 7 or Mepis Linux. Up until now everything was going as good as can be expected, all the computers could see each other and most could transfer files between each other except when Windows gets picky.In the last few days no computers can see each other. Windows or Linux.Everything can accsess the internet and wirelessly print still just can't see each other. I reset the E2500. I updated the firmware on the E2500. I installed the Cisco Connect software (just in case I was too stupid too setup a router). Still nothing. I can ping other machines from a command prompt in windows or a terminal in Linux and get a good ping back. In the router setup via a browser I can go to the status page and see other devices on the local network but most are just ipods, ipad, playbook and the wireless printer, If I go to the administration page / diagnostics I can ping other computers and get a good answer. I just can see them from each other. I think I've rebooted every thing at least once. Yes the workgroup names are all the same (workgroup) and yes file sharing is turned on on all computers.

View 3 Replies View Related

Linksys Wireless Router :: EA4500 Local IP Of Provider Network?

Aug 3, 2012

In the settings menu, there is no l2tp in which it was possible to configure a local address of the router. It should be: 10.155.41.41There is an option only for VPN server setup(10.255.255.254), but where it takes a local address that my provder has gave me?  - it is not clear. At the same time in the status of the router receives a DNS correctly and the second address embarass me little bet DNS should be:

1) 80.252.130.253
2) 80 252.130.254
 
first dns is correct, and second one looks like: 80.252.45.86Maybe he does not take a local setting of ip adress via DHCP?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved