Trying to install an E1200 inside a PPOE modem. I put in the account and password in the PPOE settings. I can see that it connects okay. But, my clients connected to the router (whether wired or wireless), do not get authenticated, so I can't get anywhere with them. Should I make the modem be the source of DHCP?
View 5 RepliesI'm using a refurbished E4200 that's connected to a SpeedStream 5360 modem to establish an Internet Connection over PPoE (ATT DSL). Connected to Ethernet ports I also have a NAS and an Airtport Express (with wireless off - it's only there for AirTunes/AirPlay).I'm getting Internet drop offs and then completely lose the WiFi, about every other day.E4200 drops Interaction Connection (PPoE)
View 4 Replies View RelatedI have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650.
View 2 Replies View RelatedI have a WRT160N that has its firmware updated and works fine thru a DHCP connection to my ISP. The issue is that my ISP is migrating all the accounts to PPoE and my router seems to be in loop once i set the PPoE connection and the connection stays intermittent, up and dow and at the end I can't use the PPoE account.
View 6 Replies View RelatedI just set up my e2500 from lynksys tech support with a motorola mode. i'm running dsl into my house laptops all connect no issues however my iphone 3gs will lose connectivity and received the ppoe failure this morning unplugging an plugging in both router/modem restes but that's a pain even doing a reset on my phone doesn't work.
View 4 Replies View RelatedI just brought home an older desktop and my wireless connection seems to disconnect about every 30 seconds to a minute, then reconnects.
The only other devices that we are using wirelessly are our phones, which we never notice a problem with. When it is connected, the signal stength is excellent. It just keeps dropping. Speed 72.0 mbps.
I am using a Linksys E-1200 wireless N router, and a Belkin N150 USB adapter.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 4 Stepping 1
[Code].....
I just got a Linksys 1200 wireless router and wanted to know how (and the best way) I can turn it off (besides unplugging it) when I am out of town?
View 3 Replies View RelatedI have a SR520W-ADSL-K9, I´m trying to setup it trough CCA, but I have some troubles. At the internet connection I mark PPoE option, enter the vci=0, vpi=35, the username, the password (like the ISP TELMEX suggest), and mark the IP Negotiated option, but I have not find the ISP service give me an IP Address and establish the connection.
View 6 Replies View RelatedI have 2 Cisco 1200 G AP's connecting 2 different locations. Location A ( La ) I have a RVO82 router connected to a 50Mbit cable connection. I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna. Only one antenna here, the other disabled.
At Location B (Lb ), about 1.5 miles away, with good to excellent line of site, i have the other setup as a WGB with a 15db wire grid directional antenna with a 1 Watt booster. Also only one antenna here, the other disabled.
WGB feeds a simple 8 port switch and in that switch i have a simple belkin wireless router setup as an AP for Lb's wireless access,
The signal strenght between the two locations is -49 to -52 db, depending on what time of day I check it.
I have had this setup for a couple of years now. I recently switched from a 3Mbit DSL connection to the 50Mbit cable connection hoping to increase my bandwidth with no luck.
.
When I first set this up i had a 6Mbit cable connection and it maxxed out at 5 Mbit at Lb. I thought i would be able to add more boosters and antennas as time went on to go from half duplex to full duplex (the way i think of it is one antenna receiving and the other sending, at both locations) so that when our ISP had faster rates available, i could upgrade. I recently read somewhere on the net that it is not possible to run full duplex in the AP to WGB setup i have. Is that true?
My main concern is increasing bandwidth on the WGB side Lb. When i upgraded to 50Mbit, i still only max out at 5mbit at Lb. Before i thought it was due to not being full duplex or weaker signal strengths (I've always had the 1watt booster at Lb, then i added one later to La with no benefit noticed except signal strength is better and uploads seem faster from Lb....)
Here is the configuration : I newly installed for a client a RV110W (firmware 1.2.0.9) wich connect on the internet trough Dlink 320B (ppoe connexion, in France - the provider is orange). Wifi is ok, VPN is ok, wan is ok ...
But no way to make port forwarding works (form wan to lan of course). I tried to reboot the router, the modem, reseting router configuration before re-apply mine, it didn't made any change. I also tried single and range port forwarding, without any succes...
Right now I have a westlll a90 750022 router working on a vista computer working fine but that's a rental. I have bought a Linksys E 1200 series router. The problem is now that when it is all hooked together our phones doesn't work, just dead that is, neither does the router.The router westell A90 from Century Tell works with a dual plug in, a DSL filter, the plug has one side for the phone line and the other for the DSL modem, in other words the westell router cannot be directly connected to the phone line.
View 1 Replies View RelatedI have a WAG320N and cannot get it to connect via PPoE.
i have IP, DNS etc but i cannot input the info manually
I have a 2901K ISR router IOS Version 15.0(1r)M12 and I will be using this as a internet router, The WAN interface will get dynamic IP from the ISP, so I need to configure PPOE. I am referring the following link for setting up PPOE. [URL] However I am unable to define PPOE protocol as shown below
INTERNETRTR(config)#!!!!! Configure Router as PPPoE Client to the ISP
INTERNETRTR(config)#vpdn enable
INTERNETRTR(config)#vpdn-group 1
INTERNETRTR(config-vpdn)#request-dialin
INTERNETRTR(config-vpdn-req-in)#protocol ?
l2tp Use L2TP
INTERNETRTR(config-vpdn-req-in)#
Any link for setting up PPOE on 2901 series router.
I need to setup my Aironet 1231 to connect some remote computers to a Cisco home wifi unit wirelessly. Here is what I need:
CiscoLinksys E1000 provides my wireless Internet connection in building A ----> Cisco Airnet 1231 is in building B and cat5 cable cannot be run between the buildings. Building B can see building A's wifi signal but only on one side. I need to provide wifi Internet to the entire B building. ---> Cisco 3550 PoE switch ----> another Areonet 1231 ---> Laptops via wifi.
OR
CiscoLinksys E1000 ----> Cisco Airnet 1231 ---> Wifi PC's
Either setup will work. My goal is to provide Internet access to one or more laptops via wifi. How would you set up the Areonet?
As a: Root bridge, Non-root bridge, or a Workgroup bridge?
install linksys e3000.
View 1 Replies View RelatedHow to install linksys wireless router to access point?
View 1 Replies View RelatedI currently have Comcast as my ISP.However there are only 4 wired ports on the router and I need an additional 2 ports for my needs. I have a 2wire 38000HGV-B Uverse Wireless gateway. I wanted to know if I could use one of the output ports from the Comcast wireless gateway and feed the 2wire Gateway to achieve the additional ports that I need. Also the wireless router from comcast is so difficult to setup that I don't even use the wireless. The 2wire gateway is much easier to setup and use and I could have wireless available where I don't have it right now.
View 2 Replies View RelatedI just bought this router yesterday. Can someone link me the most up to date firmware, and explain how to install it?
View 9 Replies View RelatedI have XP 64bit OS and I can't seem to get the setup CD to install E4200 Router. I have looked at the FAQ and it says it should be compatible with all Windows OS. Is there a link out there to the drivers I need to do this?
View 1 Replies View RelatedI first bought the e1200 version and when I tried to download it on my computer, it worked at first and installed correctly, but the cisco connect didn't properly install. I was able to log into the router online setup page ONE time. I tried to reset it and reinstall but it will not work.So I thought ok let me go and purchase a better one (thinking it was the router version having issues). So I brought it back and purchased the E2500 and I am having the same trouble.
I have tried to reset it about 20 times and reinstall and it will not install at all. It still gives me internet, but I cannot log into the http://192.168.1.1/ page at all, it tells me internet cannot display.
We currently get our internet through a small company that only uses a static IP and I cannot get our WRT160N router installed so I can manually set up our internet connection. Is there any way to install the router without using the CD provided. I keep getting the error code 322 during installation.
View 1 Replies View RelatedI bought the EA6500 yesterday and tried setting it up with the CD that came with it and it tells me ( YOUR COMPUTER DOES NOT HAVE NETWORKING CAPABILITY ) and will not install. I have the capability for networking because I have a network. I was able to set the router up but not with the software on the CD. I have tried a number of times and still get the same message and when I click on view details this is what I get .I have a network adapter and it works just fine.
View 9 Replies View RelatedI got my WRT54G from my son when he moved out of his apartment but he could not find the manual and software, I can download the manual but what about the software? I got laptop for xmas and it has Vista Premium on it and I want to install the Linksys but I am not sure about the software, do I have to have it to install?
View 9 Replies View RelatedI have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
My son gave me an E3000wireless router but the first instruction is to insert the CD and follow instructions. I don't have the CD. How do I install it? Also, this is replacing an older router that is installed and working. Can I install the E3000 without removing the older router first?
View 3 Replies View RelatedHow to install the Cisco/Linksys WRT120n wireless router with respect to using Roku.I have one computer, a laptop, which I'm using as a desktop, in that it is stationery and the only wireless device is the Roku. When I open Network File Sharing, sometimes i see 2 instances of linksys, other times just 1. general setup or whatever so I don't have to reboot the computer every 2 hours to watch Roku.
View 1 Replies View RelatedI have this router that wouldn't connect because I lost the password. I held the reset button for 90 seconds and it neverwould reset.
View 4 Replies View RelatedI came into an old Win 7 computer (64-bit) with a WMP54G v4.0 wireless card in it. Apparently the driver had already been installed previously but when I booted the computer it didn't acknowledge the existence of the card or drivers. I installed the driver from here[url]... and restarted the computer when prompted (the card was already in the computer). Upon restart the setup was supposed to complete, but it never came up. When I re-ran the setup it just said the driver is already installed.The card still isn't being recognized, scanning for new hardware in the device manager doesn't bring it up. There is an entry for a "Network Controller" with no driver installed, it may be the WMP54G but trying to manually install the driver doesn't work. Windows just says it can't find the driver even when I point the install wizard right to its location.
View 1 Replies View RelatedInstlling WPA2 on my router I had this router WRT54G ver 6 for several years and it works perfect only thing is I have no security on my n wireless
View 3 Replies View RelatedI have an Acer Aspire 5517 with Windows 7 Home Premium connected wirelessly to a Linksys E1000 which is connected to a surfboard modem connected to Comcast cable internet. I just picked up an HP Proliant DL360 server with no OS and no optical drive. It tries to PXE network boot when I turn it on. How do I use my Laptop to install a linux image via the network?I have read extensively about this subject for a couple of days now and jacked up my IP settings in my router as well as my network adapter a couple of times now. Everything is backed up and my original settings are written down. I have asked for advice from Microsoft and HP as well.
View 1 Replies View RelatedI am trying to install a wireless bridge on my network. It is a Linksys WET54G v3 wireless bridge. I follow the instructions to configure the bridge: attach the antenna, plug the Ethernet cable into the bridge, plug the other end of the cable into the RJ-45 port of the hub (a Linksys WRT300N router), plug the power supply, insert the setup disk, and run the setup program. After following the steps, it came back and said it could not find a wireless bridge on my network. I tried just plugging the wireless bridge directly into the PC (as it was one of the alternatives in the instruction) Ethernet port. I got the same message. The set up on my wireless router is as follows, DSL modem connects into wireless router, and wireless router connects to PC Ethernet port. I am thinking, connecting the wireless bridge to one of the ports on the wireless router wouldn’t necessary allow the PC to know it is there, would it? Could it be that I don’t have a network? Does a wireless router form a hub?
View 9 Replies View RelatedWhen I try to install the USB software "CiscoVUSB" on MacBookPro running OSX10.7.4 I receive the following error: "The following installation step failed: run postinstall script for Cisco VUSB Installer. Contact the software manufacturer for assistance." Spent over an hour with support last night w/o issue was escalated.
View 4 Replies View RelatedNotified of new firmware for my router. Tried to install. Downloaded fine but will not install. Keeps saying error but not what kind, how to fix, not anything.
View 1 Replies View Related