Linksys Wireless Router :: WMP54Gv4 Won't Install On Windows 7 Or Ubuntu
Mar 10, 2012
I came into an old Win 7 computer (64-bit) with a WMP54G v4.0 wireless card in it. Apparently the driver had already been installed previously but when I booted the computer it didn't acknowledge the existence of the card or drivers. I installed the driver from here[url]... and restarted the computer when prompted (the card was already in the computer). Upon restart the setup was supposed to complete, but it never came up. When I re-ran the setup it just said the driver is already installed.The card still isn't being recognized, scanning for new hardware in the device manager doesn't bring it up. There is an entry for a "Network Controller" with no driver installed, it may be the WMP54G but trying to manually install the driver doesn't work. Windows just says it can't find the driver even when I point the install wizard right to its location.
View 1 Replies
ADVERTISEMENT
Aug 20, 2007
I used several of these wireless nick's in various systems. Installation was always done without using Te Linksys monitor. Just the installation of the driver via hardware management.
View 4 Replies
View Related
Oct 16, 2012
I partitioned my hard drive and installed Ubuntu 12.04. Now I'm trying to install the wireless drivers found here:
[url]....
Which I got by selecting Ubuntu 10.10 in the dropdown list here:
[url]...
because it was closest to what I have.
I downloaded the tar.gz, extracted it, and double clicked on misc/<some long filename>.deb, which opened up the software center, and I hit install.Installation fails saying the dkms dependency failed, but I have dkms installed.
View 1 Replies
View Related
Jan 4, 2010
I had been using my Linksys wireless-G PCI adapter WMP54Gv4 in a PC running XP (SP3) and an Airport Extreme wireless router for the past 4 or 5 years without any issues. Then recently, my wireless signal had become flaky on all client machines (on both PC and various Macs, which reported weak signal and kept dropping and searching for a new PPPoE from my DSL line). AT&T verified our line was fine and even sent a new modem but troubles persisted, so I bought a new Airport Extreme last week. This solved the network reliability issue on the Macs just fine.
However, the PC with the WMP54Gv4 adapter now crashes whenever the new Airport Extreme is turned on. There have been no hardware or software changes on the PC, yet it now reliably produces a BSOD stating "DRIVER_IRQL_NOT_LESS_OR_EQUAL". This crash also happens when booting in safe mode with networking. I can avoid the system crash when booting in safe mode without networking or booting normally without my Airport Extreme turned on, though I do see this error: "Linksys Wireless Network Monitor: Access violation at address 0040756D in module EMP54Gv4.exe"
So I cannot run any tests of the PCI card on the machine when the wireless network is on, since the operating system crashes.
The evidence thus points to an explanation where my wireless network from the new Airport Extreme is tripping up the operation of the linksys wireless card in a way that XP hates. I know the wireless network is OK, since it works fine on my Macs. I confirmed that my driver (v3.0.3.0) is still listed as current for this PCI card, so it's not a matter of having an out-of-date driver.
Here's another observation that may be relevant: When I first started using the new Airport Extreme with WPA2 protection, the PC could run without crashing, but it could not connect to the wireless network. I also had trouble connecting via my Macs. Then I switched the Airport Extreme to use WPA/WPA2 security, which is when the network-based PC crashing ensued (though the Macs can now connect just fine).
View 9 Replies
View Related
Jan 18, 2013
this is my first usage of ubuntu and installing my wireless driver.
View 1 Replies
View Related
Jan 22, 2013
how to install network drivers on ubuntu 9.4?
View 1 Replies
View Related
Apr 3, 2012
i used intel DH61WW mother board, processer is intel core i3 3.10 Ghz speed, I need lan drivers for this board OS is UBUNTU 10.04 my E-mail ID is ( url.... )
View 1 Replies
View Related
Jan 4, 2011
Any way to install this excellent WiFi adapter on Ubuntu?
View 7 Replies
View Related
Apr 7, 2013
i cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies
View Related
Jan 28, 2012
is it possibe to set up a ubuntu linux PC on a linksys wireless router? linksys says "no". also where would I get the printer, wireless card, and sound drivers. it's a dell latitude running a pentium m (yeah, i know).
View 10 Replies
View Related
Jan 28, 2011
when i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies
View Related
Nov 8, 2009
I am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
View 5 Replies
View Related
Oct 12, 2010
I purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies
View Related
Mar 26, 2012
I get the following error when running the setup executable downloaded from this site:
Error description: Adapter can't be Found
Model name: AE1200/AE2500
Operating system: Windows 7 SP 1
Software version: 2.1.0.6
Motherboard is an asus p7p55
I have tried all 8 usb ports on the back of my computer and the 2 case ports. Non of them detect the adapter when running the setup executable. I have no other usb devices connected. Windows 7 was installed on this machine at the begining of this month. I have attempted to install the AE2500 on another windows 7 pc and it installed with no problems. I suspect the problem is the motherboard.
View 1 Replies
View Related
Aug 11, 2011
I have tried installing this device on Windows 7 64bit machine. The install seems to go fine and the device works at 2.4G.
But I purchased this unit to be able to test a clients 5GHz system. There does not seem to be any place to switch from 2.4G to 5.0G.
View 2 Replies
View Related
Mar 19, 2011
I cant install drivers for Windovs XP both 32-64 Professional. Original CD tells me for x64 OS is not supported, also, when trying to install only drivers it just can't find it. For x32 same problem - can't install drivers. I've got Intel DP45SG.
View 5 Replies
View Related
Mar 26, 2011
I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
View 5 Replies
View Related
Jun 9, 2011
how to LAN ubuntu with windows xp
View 1 Replies
View Related
May 20, 2011
step by step procedure how to map windows drive in ubuntu 8.04
View 1 Replies
View Related
Feb 17, 2011
When I click on Network under Places I can see Windows Network folder. When I click on the Windows Network folder it displays an error message of Unable to mount location...Failed to recieve share list from server.
View 1 Replies
View Related
Apr 1, 2012
I've finally made the jump into Ubuntu and put it on my laptop. I have never used Linux before so it will be a bit of a learning curve although it does look quite user friendly.
I have already connected my Ubuntu laptop to my wireless router so I have internet. I would just like to be able to access files on my PC and vice versa similar to Windows Homegroup but I have no idea how.
PC = Windows 7 Ultimate - Laptop = Latest version of Ubuntu (I think it's 11?)
View 8 Replies
View Related
Mar 19, 2011
My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies
View Related
Jul 7, 2012
I have never had to share an Ubuntu drive to windows before, and I never thought it would end up being this difficult. What I need to do is share my 500gb drive in ubuntu, it is a secondary drive, not the primary with the OS on it, to my windows xp and my windows 7 machines. So far I have samba installed on the ubuntu machine and I have formatted and set everything up. The issue is that I just cant figure out how to connect to it in windows becuase when i use the map network drive feature it says something about no network found.
View 1 Replies
View Related
Aug 19, 2012
How can I transfer file from my windows 7 os to virtualbox ubuntu at the same time??
View 3 Replies
View Related
Mar 14, 2011
If I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
View 2 Replies
View Related
Jan 26, 2011
My setup was as follows:
Computer 1 - Win7 ip address 192.168.1.2
Computer 2 - Ubuntu 10.10 ip address192.168.1.3
Had samba working Ok Decided to check out Fedora 14 so set it up as dual boot on Computer 2 and installed samba.
Computer 1 - Win7 ip address 192.168.1.2
Computer 2 - Dual boot Ubuntu 10.10/Fedora 14 ip address 192.168.1.3
When Ubuntu is running, Win 7 sees shares for Ubuntu. If Fedora is running win 7 cannot connect to any shares stating a bad file path. From my understanding as both linux os'es are on the same computer, using the same connection, the ip address for both would be the same and that�s probably were Win7 must have problems. From what I've read on the net it seems changing the netbios name or computer name would not work as Win7 would only use these to resolve the ip address which in this case would be the same.(Could be wrong).So essentially is there a way for Win7 to recognise which linux os was running on Computer 2 and display the shares accordingly.
View 6 Replies
View Related
Sep 5, 2011
I have 1 computer a HP system with Ubuntu 11.04 installation.I would like to install the Linksys WUSB600N-AS (V2) into the Ubuntu but the drivers and instruction is very confusing.tell me which drivers to download and how to install.
View 1 Replies
View Related
May 9, 2012
install linksys e3000.
View 1 Replies
View Related
Dec 22, 2012
wpc11ver.3 / get driver for Ubuntu operating system?
View 2 Replies
View Related
Feb 9, 2011
My windows xp wireless drivers was functioning normally in my dell610.but accidentally i uninstalled it, now i am trying to install it but it ends up with an icon at the bottom which shows that it is installing but nothing is going on.i have tried this several time but i failed.
View 1 Replies
View Related
Sep 7, 2012
I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting installed . I just want to use the AC client to connect to wireless network.
View 2 Replies
View Related
Jun 19, 2011
How to install linksys wireless router to access point?
View 1 Replies
View Related
Oct 30, 2011
I currently have Comcast as my ISP.However there are only 4 wired ports on the router and I need an additional 2 ports for my needs. I have a 2wire 38000HGV-B Uverse Wireless gateway. I wanted to know if I could use one of the output ports from the Comcast wireless gateway and feed the 2wire Gateway to achieve the additional ports that I need. Also the wireless router from comcast is so difficult to setup that I don't even use the wireless. The 2wire gateway is much easier to setup and use and I could have wireless available where I don't have it right now.
View 2 Replies
View Related
