How To LAN Ubuntu With Windows Xp
Jun 9, 2011how to LAN ubuntu with windows xp
View 1 Replieshow to LAN ubuntu with windows xp
View 1 Repliesstep by step procedure how to map windows drive in ubuntu 8.04
View 1 Replies View RelatedWhen I click on Network under Places I can see Windows Network folder. When I click on the Windows Network folder it displays an error message of Unable to mount location...Failed to recieve share list from server.
View 1 Replies View RelatedI've finally made the jump into Ubuntu and put it on my laptop. I have never used Linux before so it will be a bit of a learning curve although it does look quite user friendly.
I have already connected my Ubuntu laptop to my wireless router so I have internet. I would just like to be able to access files on my PC and vice versa similar to Windows Homegroup but I have no idea how.
PC = Windows 7 Ultimate - Laptop = Latest version of Ubuntu (I think it's 11?)
My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies View RelatedI have never had to share an Ubuntu drive to windows before, and I never thought it would end up being this difficult. What I need to do is share my 500gb drive in ubuntu, it is a secondary drive, not the primary with the OS on it, to my windows xp and my windows 7 machines. So far I have samba installed on the ubuntu machine and I have formatted and set everything up. The issue is that I just cant figure out how to connect to it in windows becuase when i use the map network drive feature it says something about no network found.
View 1 Replies View RelatedHow can I transfer file from my windows 7 os to virtualbox ubuntu at the same time??
View 3 Replies View RelatedIf I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
View 2 Replies View RelatedMy setup was as follows:
Computer 1 - Win7 ip address 192.168.1.2
Computer 2 - Ubuntu 10.10 ip address192.168.1.3
Had samba working Ok Decided to check out Fedora 14 so set it up as dual boot on Computer 2 and installed samba.
Computer 1 - Win7 ip address 192.168.1.2
Computer 2 - Dual boot Ubuntu 10.10/Fedora 14 ip address 192.168.1.3
When Ubuntu is running, Win 7 sees shares for Ubuntu. If Fedora is running win 7 cannot connect to any shares stating a bad file path. From my understanding as both linux os'es are on the same computer, using the same connection, the ip address for both would be the same and that�s probably were Win7 must have problems. From what I've read on the net it seems changing the netbios name or computer name would not work as Win7 would only use these to resolve the ip address which in this case would be the same.(Could be wrong).So essentially is there a way for Win7 to recognise which linux os was running on Computer 2 and display the shares accordingly.
I came into an old Win 7 computer (64-bit) with a WMP54G v4.0 wireless card in it. Apparently the driver had already been installed previously but when I booted the computer it didn't acknowledge the existence of the card or drivers. I installed the driver from here[url]... and restarted the computer when prompted (the card was already in the computer). Upon restart the setup was supposed to complete, but it never came up. When I re-ran the setup it just said the driver is already installed.The card still isn't being recognized, scanning for new hardware in the device manager doesn't bring it up. There is an entry for a "Network Controller" with no driver installed, it may be the WMP54G but trying to manually install the driver doesn't work. Windows just says it can't find the driver even when I point the install wizard right to its location.
View 1 Replies View RelatedI have a tablet running Ubuntu 9.04 with a USB connection to a host computer. (Ideally the host is running Windows, but if absolutely necessary I could switch the host to be Ubuntu also.)
I want to be able to SSH into the device without RS-232, WiFi, or other network connection. What software combination and setup do I need to make this happen?Basically, I'd love the be able to have the equivalent of adb shell, but for when the tablet is running pure Ubuntu, not Android.
I have Squid proxy installed on a ubuntu box here. Currently all my PC's use my ADSL modem as their default gateway but what i wanted to do was see if it was possible to use the ubuntu box as the default gateway, and have it route through Squid to my ADSL modem.
View 3 Replies View Relatedthis is my first usage of ubuntu and installing my wireless driver.
View 1 Replies View RelatedI am wondering how to share my mac desktop's wifi to an ubuntu 12.04 box via ethernet. I know how to share the internet from the mac but don't know how to connect to it on the ubuntu box. I have made ipv4 connection but internet doesnt work on both.
View 6 Replies View Relatedif i want to connect d-link router to system it asking for password i enter admin /password it is not accepting
View 1 Replies View RelatedI just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies View Relatedhow to install network drivers on ubuntu 9.4?
View 1 Replies View RelatedI setup a wifi Hotspot in my desktop(Ubuntu 12.04), and was able to connect to it using my laptop(also Ubuntu 12.04).
My desktop is connected to Internet using Ethernet cable and I can access internet from my desktop but not from my laptop.
Also I can ping successfully to my router from my laptop, but still no internet.
Desktop routing table.
$ /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1
10.42.0.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
I have a machine with two ethernet cards and internet connection, on which Ubuntu 12.04 is installed.Both ethernet cards can take ip adress automatically say,
eth0:47.168.137.14 and eth1:47.168.137.15
I can ping eth0 but can not ping eth1.
Is there a special setting for gettting both ethernet interface active and reachable at the same time.
I have a laptop1 which has its two interfaces ( wired and wireless ) working. And have another laptop (laptop2) for which only wired interface works.
I am planning to connect the two wired interfaces such that laptop2 can connect to internet through the wireless interface of laptop1. How to achieve this? Both systems use Ubuntu 10.04 Desktop edition
Network settings. What I want to do is limit the rate that people can download files from my webserver remotely. LAN connections should still be able to transfer at full speed, but anything outside of the local network should be limited to 200Kbps per connection. Is that even possible? Can I limit the number of connections per client (probably by IP)?
If this can't be done at the OS level, is there any way I could script it using PHP? Maybe read X bytes into a file and then sleep...
I have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies View RelatedWe are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
View 4 Replies View RelatedI use a limited usage internet plan and want that when I surf approx 10MB of data my connection automatically stops further download untill i reset or increase the usage.
View 2 Replies View RelatedI want to set up ipchain firewall of my ubuntu so that it prevents to traffic to an specific IP address?
View 1 Replies View RelatedI have an Ubuntu Server, when someone is downloading a file from it, my bandwidth significantly decreases, how can I cap it?
View 5 Replies View RelatedI have a Sony Viao PCG-71312L laptop that has Windows 7, 64-bit as OS. I loaded on Ubuntu as want to learn more about Linux. The wireless locator finds the signal but won't connect.It says "ethos" and then when you click from there I don't get through. Just seems to keep looking forever, then says after 3 minutes can't connect.It could be I need a specific driver for the Ethernos wireless device, I am not sure. Further I am had a hacking where I had to change wireless settings so I may have done it myself. I am able to connect on my Windows 7 wireless network account but not the Linux one. I tried deleting the account on the Linux Ubuntu that shows up but this didn't work.May have made worse.Is this on my wireless device side, meaning I need to change/get password ect or the Ubuntu side where it's some type of common problem. Do I need to access through the router web page? Incidentally that's blocked for me too.
View 2 Replies View RelatedI want to connect two laptops for experiment purpose. I do not want to use the internet on any of them , just be able to ping from one pc to another and SSH into them. The use is basically for a mobile robot , one pc on the robot and another one to control and see the processes using SSH. How do I use a wireless router to create such a network? I am using Ubuntu on both system (I tried ad-hoc but its not working).
View 1 Replies View RelatedI have 2 PCs, an Acer H340 and a network printer wired to the WAG320N; two other PCs are connected wireless. On every PC I have Windows 7 and Ubuntu (except the NAS with WHS).When I boot with Ubuntu on every PC, I can print, I can connect to intenet, open the Web interface of the WAG320N at 192.168.1.1 but I CAN'T see the NAS and the other PCs: this with the wired PCs and the WiFi connected ones. A Galaxy Tab can browse the NAS content and the Web.I didn't had this problem with the modem router I had from the ADSL supplier and the Huawei D100 I used before.On the network map of the Cisco Network Magic the Linux PCs are showed connected to the WAG320N with a dotted line, when the W7 ones are connected with a solid line.
View 3 Replies View RelatedWe have an ASA 5510 running 9.1 and the latest 3.1 AnyConnect package for Linux. The problem that i am having is that the AnyConnect VPN will drop after maybe 30 seconds or less of connection. It will connect fine. I can ping my remote servers. Then it will drop and go into a "Reconnecting State". Of which it will not reconnect. I have to close AnyConnect and then try to connect again. Then I'll get the same results. We have about 25 employees that use the AnyConnect VPN all day on Windows 7 machines without any problems. The issue appears to be isolated to my Ubuntu laptop. I have gone so far as to completely reinstall Ubuntu, both 64 and 32 bit versions but end up with the same results.
View 2 Replies View RelatedI use a modem d-link DWM 152,,at first be detected, was able to browse. connect the modem still keep fit (I forget if it still connect.), I just unplug it. when i plug it in again, the modem is not detected.
View 1 Replies View RelatedI'm running Ubuntu Server in VirtualBox. When I select the internal network option for the network adapter and start up the VM, I only get IPv6 address. I need an IPv4 address as well. My host (running Windows 7) gets has both an IPv4 and IPv6 address listed when I run ipconfig. When I run ifconfig on the guest (running Ubuntu Server), it only lists IPv6.
View 3 Replies View RelatedIs is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies View Related