Ubuntu 12.10 Possible To Run Transmission Or Google Chrome Only Using OpenVPN?

Feb 24, 2013

Is is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)

View 1 Replies


ADVERTISEMENT

Can't Run A Proxy In Google Chrome

Jun 1, 2012

I cant seem to run a proxy in google chrome when i try and run my ip hider program the internet just gets error?

View 1 Replies View Related

OpenVPN On Ubuntu 11.10 - Unable To Redirect Default Gateway

Jun 8, 2012

I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user):

openvpn --config /home/vladimir/client.ovpn

Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others:

NOTE: unable to redirect default gateway -- Cannot read current default gateway from system

Below is full output of openvpn command:

[code]....

View 1 Replies View Related

Will Google Chrome Block A Website

Jul 30, 2012

I am using Chrome as my primary broswer, but recently I can't get access to a particular website, but while I use other browsers to access that site, it is perfectly fast and without any problems at all. I don't know if i have accidentally pressed any key or accepted any setting that has made google chrome to block access to that site.

View 3 Replies View Related

Google Chrome Failing After Changing Modem?

Apr 14, 2012

Recently i have to change my modem (lightning struck) which of course, done by my ISP worker.The problem is, since then, I've been getting the "DNS lookup failed" error message constantly while using Google Chrome. Or sometimes the "This web page is not available - The connection to [URL] was interrupted".I have to refresh the search once or twice to get to the site, which is very annoying. I tried surfing on my friend's laptop, using the same wireless connection and it seemed to work fine. This problem only occurred on MY laptop.One more thing is, the connection doesn't seem to go wrong because i could play online game with no trouble like lagging or disconnection whatsoever. (Starcraft)

These are the details:
ISP - Streamyx (malaysia)
Broadband - ADSL wireless
Modem - ZyXel p-600 series
Anti-Virus - Trend Micro Titanium Internet Security
Firewall - Windows Firewall

View 10 Replies View Related

Error Message In Google Chrome - DNS Lookup Failed

Jun 20, 2011

I have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!

View 13 Replies View Related

Linux - Split Tunnel Routing Specific Port Over OpenVPN On Ubuntu Server 12.04

Jun 10, 2013

(Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443) Only my goal is a bit different. I am running a headless gui-less install of Ubuntu Server 12.04 that is being used for a variety of different purposes... I would like all traffic to travel un-prohibited through my ISP except for my transmission traffic. I have a VPN i subscribe to that allows me access for which I only want to direct a single port's traffic to. I am currently using a modified version of the code from the above link. My current code is below:

#!/bin/sh
sleep 200
DEV1=eth0

[Code].....

View 1 Replies View Related

Can't Connect To Internet Through Google Chrome Or Explorer / Pages Simply Won't Load

Mar 24, 2011

I can't connect to the internet through Google chrome or explorer, pages simply won't load.

-can't ping the pc from other pc but can ping the modem
- internet shows connected and receiving data
- all connections tight
- internet/wireless modem working fine working fine with my other pc/laptop
- all other programs on the pc seem to work fine
- I have changed no settings on the pc since I last used it and the internet
- I had not used the internet in approx 2 months on the problem pc
- I tried turning off the firewall.
- running XP

View 3 Replies View Related

Cisco Switching/Routing :: 887W - Google Chrome And Updates Not Working

Nov 1, 2012

I have cisco router 800 series 887 VAW. WiFi is connected to all my devices through this router, i.e.,  Windows XP,  Vista, Wii, Nexus 7 and HTC Desire S. I can access internet from all these devices. The apps which are already downloaded on my Android devices connect to internet, but the bigest problem is here:
 
1. Google Play does not connect (on both Nexus 7 and Desire S).
2. Chrome does not work on Nexus 7
3. Nexus 7 fails to check for any system update.
4. Fails to sync accounts.
 
I tried to contact to the company which gave me this router, but they told the problem lies with my tablet. But the tablet works perfectly fine with others networks and Android phone works fine with 3G and other networks.

View 5 Replies View Related

Transmission Signals As Transmission Electricity

Feb 27, 2012

The coaxial"or any other metal cable" was using for transmission signals(before fiber optic) the coaxial need repeater every 2 or 3 Kilo meter,because the signal will be attenuation when pass through the cable,when we transmission electricity to far places ,we use transformer to rising the voltage to 10000 or 100000 volt

View 8 Replies View Related

Connecting To A VPN Using Free OpenVPN Software?

Mar 31, 2012

I'm trying to connect to a VPN using the free OpenVPN software. This has been working for a while, but recently I keep getting the following error. My OpenVPN config file is also copied in below. I've tried searching for a fix but haven't managed to find anything.

Code...

View 2 Replies View Related

OpenVPN Bridging Degrades LAN Transfer Speed

Nov 2, 2012

I want to say that I am new to networking and VPNs, but I have really enjoyed setting up my own OVPN server and learning along the way. The impetus for my investigation in OVPN came from my desire to route my internet traffic through my home network while being at school and to have access to my home networked printer and NAS. I decided to go with a bridged OVPN setup on my NAS. I successfully bridged my NAS LAN adapter with the OVPN TAP driver, deployed the server on my NAS, and have had great success accessing my NAS, printer, and LAN remotely. Note that I use Windows 7 on all of my devices. Everything works well and I can just about max out my home ISP download/upload speed when transferring files over the VPN.

However, I noticed that after deploying the OVPN server my local transfer speeds over my LAN to my NAS are greatly reduced. After several days of trouble shooting I have narrowed the problem to the bridging of the OVPN TAP Device with my NAS LAN adapter. [code]

View 1 Replies View Related

Networking :: OpenVPN Advice Of Pointers 5015a

Feb 8, 2011

I`m looking to have a play with VPN, but as my original plans to install PFSense onto a SuperMicro 5015a-EHF system are on hold due to availablility/Pricing issues, I`m lookin at doing it with my current IPCop.

Mooching around I find Zerina but after getting throught to the SSH directory and unpacking bit, it turns out zerina only supports ipcop up to 1.4.early version!

Further digging around gets me onto openVPN so I go down the same route but with no easily available walkthrough/howto I quickly found myself struggling and discovered the ipcop forums which, from what I have read, have to be the single most unfriendly forum I have ever discovered. How to get VPN set up on my IPCop?

View 13 Replies View Related

Using PPTP Or OpenVPN Encrypt Entire Connection To Internet?

Jul 15, 2012

If i use PPTP or OpenVPN does this encrypt my entire connection to the internet or just web browsing?

View 7 Replies View Related

Linksys Wireless Router :: Linux OpenVPN Connection Through E4200

Jul 6, 2012

When I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.

OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.

View 5 Replies View Related

Linksys Wireless Router :: Septup OpenVPN In E4200 Without Installing Dd-wrt?

Sep 14, 2011

Can I septup an OpenVPN in an E4200 without installing dd-wrt?

View 7 Replies View Related

Home Network :: OpenVPN ICS (Internet Connection Sharing) With Xbox 360 Device

Jan 21, 2012

recently I've connected to my OpenVPN and everything works fine on my PC I'm getting okay speeds and the VPN IP appears on [URL]The problem is I wanna use internet connection sharing to play Xbox Live while connected through my VPN and I'm having issues.My Xbox isn't even recognizing my wired connection.This is the setup:Wireless Connection > Desktop > OpenVPN > Wired connection from desktop to XboxWhat I think I'm doing wrong is not specifying the correct home networking connection for my LAN 3 (Tap-Win32 Adapter OAS)I tried sharing the LAN 3 connection and set the home networking connection to my Wireless and it disconnects me from my wireless network.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN And N750 Is Incompatible?

Apr 30, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I will never ever buy anything Chinese bricked.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN UDP Connections Are Being Blocked By Router

Apr 14, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Latest
ISP :

The UDP connections are being blocked when I use my VPN. I can connect for a while but soon after a while, the connection doesn't work. I can't even access the router page.

View 3 Replies View Related

D-Link DIR-655 :: Very Low Transmission Rates On DWA-160

Aug 24, 2012

here is my setup:

Router:  DIR-655 B1 2.00NA 
Desktop1:  DWA-160 A1 1.80  [IP: x.x.x.104]
Desktop2:  DWA-160 A1 1.80  [IP: x.x.x.103]
Laptop:  Intel WiFi 5300 AGN  [IP: x.x.x.100]
iPad 2 (1): [IP: x.x.x.101]
iPad 2 (2):

Router Config, Status, and Inssider Report:

[URL]

View 5 Replies View Related

How To Select Optical Transmission Mode

Apr 4, 2013

560km long pipeline, intermediate station at every 30 or 40 kms. Couple of Ip phones, 2 or 3 IP camera, and few control signls (IP system) will be connected at every stations. Do not expect heavy data. Which one may be the prefered economical solution can I use

1. Ethernet network (Switch with Optical SFP ports at every site)
2. SDH equipment at every site
3. DWDM equipment (if so lower end)

View 3 Replies View Related

What Is Wireless Full Transmission Speed

Nov 22, 2011

What is the maximum operating range (distance) allowed to maintain the full transmission speed?

View 4 Replies View Related

D-Link DIR-655 :: DNS 323 NAS - Data Transmission Between Pc And Router

Mar 12, 2011

I recently bought the Dlink DIR-655 router and I have a Dlink DNS 323 nas.  I have them connected and working.  When I send data from my PC to the DNS 323, i'm doing about 6MB/s.  when I'm sending data from DNS 323 to my PC, i'm doing about 30MB/s.   all 3 devices have the 1000 Mbps enabled and Jumbo frames is enabled on the DNS 323 and my PC. is this normal?

View 14 Replies View Related

Can't Load Some Sites On Chrome

Dec 18, 2011

I have a problem on my Google Chrome explorer that if for example I am going to [URL] so every time I am clicking in a link (no matter what... some friend's profile, or friend's pictures...) I see only the blue Facebook bar on top and that it. So if I want to page to load perfectly I need to mark the address and click enter, and then the page loads perfectly.

An I need to do this any time I am entering any link. And it's not only on this site. it's also some others sites includes Twitter.

I tried to see if the problem continues in other explorer like firefox and IE, but not... it works perfectly there!

View 3 Replies View Related

Port Has Not Finished The Transmission - How To Reuse (56789)

Jun 21, 2011

I am dropping a FIN packet in the server and sending the following request from the client

curl --local-port 56789 http://servername

At this point a session is created for the port no 56789.

Immediately ,(the port has not finished the transmission yet) , I am sending another request using the same port as following.

curl --local-port 56789 http://servername

Now the following error occurs .

curl: (7) bind failure: Address already in use

My question is how to reuse the same port (56789) again in this situation?

View 1 Replies View Related

Wireless Transmission To Speakers From Stereo Amplifier

Nov 25, 2012

I have a server running sbs essentials and a system running windows 7 pro, but i cant get win7 pro to join the domain on the server, i get the following message - "An attempt to resolve the DNS name of a DC in the domain being joined has failed". I need to enter the domain controller i.p as the dns on the windows 7 machine ? is this true ? if so how do I find out the domain controller i.p,

View 1 Replies View Related

Linksys Cable / DSL :: Transmission Power On A WAG160N?

Apr 15, 2012

I am trying to lower the transmission power on my WAG160N. I thought it should be an option in my advanced wireless settings of the web based setup page, however there is only transmission rate, n transmission rate and cts protection mode.

View 1 Replies View Related

Belkin Routers :: Transmission Rate For F9K1002V4?

Nov 26, 2012

For an N300 model F9K1002V4 router, how can I tell if it's transmitting in N mode? I have two newer laptops that are capable of receiving the 802.11N signal but are only receiving at 54mbps. The router is set to transmit at b/g/n rates.

View 7 Replies View Related

Belkin Routers :: Max Out Transmission Signal On N300?

Dec 6, 2012

my neighbors cant pick up my signal unless they are outside. can i boost the signal from my router?

View 1 Replies View Related

Cisco WAN :: 1841 And WIC-1T For Data Transmission With RS-422 Equipment

Dec 22, 2010

I would like to connect my 1841 to the equipment that has RS-422 interface in order to transmit data. I have to buy one WIC-1T to support it. However, I am not sure that this module will be able to support RS-422 or not (As I can see there is DB25 which is the interface of RS-422, but I realize that RS-232 also has 25 pins.)

View 3 Replies View Related

Cisco WAN :: 2328 / Packet Transmission In OSPF?

May 8, 2013

The LSRefreshtime is 30 minutes in OSPF as per rfc 2328, So the router LSA will start after this time(30 minutes). By using router lsa only the Link State Database will be updated. Suppose the datatransmission is started when it(router) is switched on. by using Link State Database only the routing table will be updated.

View 2 Replies View Related

Chrome - Cannot Open Any Links In Emails

Jan 26, 2013

cannot access the link to renew my password - links always disabled.Have tried in the browser; does not work.cannot open any links in emails at all.

View 1 Replies View Related

Opened Chrome And DNS Lookup Failed?

Aug 28, 2011

whenever i open chrome or anything i get DNS Lookup failed.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved