OpenVPN On Ubuntu 11.10 - Unable To Redirect Default Gateway
Jun 8, 2012
I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user):
openvpn --config /home/vladimir/client.ovpn
Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others:
NOTE: unable to redirect default gateway -- Cannot read current default gateway from system
Below is full output of openvpn command:
[code]....
View 1 Replies
ADVERTISEMENT
Jan 2, 2011
I have Squid proxy installed on a ubuntu box here. Currently all my PC's use my ADSL modem as their default gateway but what i wanted to do was see if it was possible to use the ubuntu box as the default gateway, and have it route through Squid to my ADSL modem.
View 3 Replies
View Related
Feb 24, 2013
Is is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies
View Related
Jun 10, 2013
(Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443) Only my goal is a bit different. I am running a headless gui-less install of Ubuntu Server 12.04 that is being used for a variety of different purposes... I would like all traffic to travel un-prohibited through my ISP except for my transmission traffic. I have a VPN i subscribe to that allows me access for which I only want to direct a single port's traffic to. I am currently using a modified version of the code from the above link. My current code is below:
#!/bin/sh
sleep 200
DEV1=eth0
[Code].....
View 1 Replies
View Related
Jul 11, 2012
I am having connection issues with my laptop involving my wireless adapter (I assume), since I am able to connect to the internet via a different laptop, Xbox and phones in the household. It is a Dell M5010 and the problem has only recently occurred.
View 9 Replies
View Related
Oct 24, 2011
about two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1
View 2 Replies
View Related
Jul 14, 2011
I'm unable to connect to the internet from my laptop. When I do a diagnostic test it tells me that the default gateway is not available. I've tried resetting it, resetting my IP address via command prompt, restarting the router, etc.
View 10 Replies
View Related
Mar 31, 2011
We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?
View 1 Replies
View Related
Apr 26, 2012
I'm running several game and file servers via a dynamic IP, which I unfortunately cannot change to a static connection for several reasons. I've solved this by using No-IP, which is a Dynamic IP resolution service. This solved the first part of my problem - I can give people IP's for their websites, such as myfreemusic.sytes.net and so forth, but they all HAVE to append their ports to the url - i.e.
site1.sytes.net:90
site2.sytes.net:91
My main problem right now is the game servers - I'm hosting games that default host to 25565, and though I can change the ports the server hosts from, I must give those who want to connect the ports at the end of their urls, i.e.
server1.sytes.net:25566
server2.sytes.net:25567
I know DNS is essentially agnostic when it comes to ports, so no solution there. And I don't think the game (Minecraft vis-a-vis bukkit) supports SRV records, and even if they did, I'd have no idea how to configure them. How can I resolve static urls redirecting to a dynamic IP by pointing them to ports?
To simplify the question -
How can I make server1.sytes.net resolve to port 25566, and server2.sytes.net resolve to port 25567 when the default port is set to 25565?
View 1 Replies
View Related
Apr 12, 2011
We are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
View 4 Replies
View Related
Oct 29, 2012
I don't get whats the problem but when i try to run the following command :
sudo apt-get update
I was getting an output of sort...
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to security.ubuntu.com (91.189.92.184)]
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to
[Code]....
And our institute uses a proxy server... when i try to ping that server it was pinging these servers but not the external servers...like security.ubuntu.com or some other site... I can access internet from my browser, but the software center is unable to download anything.
View 1 Replies
View Related
Sep 26, 2012
I've tried two operating systems (Ubuntu 12.04 and Windows XP) two different wireless adaptors (Dell M1530 internal adaptor and Alfa USB Adaptor which I get full bars on) and tried a different Dell M1530 laptop which I'm also having issues with. I've also tried to diagnose the network with a tool, but I'm totally unable to connect to it so I'm unable to get any more information.If I try to connect to an unsecured network, it works perfectly. I'm totally stumped about this, due to the fact that I've used two different operating systems, two different adaptors and two different laptops (albeit the same brand).
View 4 Replies
View Related
Feb 21, 2013
i joined because i keep on having the same problem. i read around the forum a bit before joining and i saw that mcafee was causing the problem for a lot of people. i dont have mcafee so that cant be it several crashes per day. like, literally close to 100 of them.
View 3 Replies
View Related
May 3, 2012
Periodically, I drop internet everywhere around my college's campus. I'm literally four feet from a router, but it doesn't seem to matter. I'll disconnect, run troubleshooter, and I'll get the error message saying that the default gateway is not available. My college is designed for Macs, but I'm running Windows 7. My Mac colleagues do not experience problems. The computer works at home and at nearly every other wireless network I've brought it in range of. Specifically, either IBM or Dell.
Dell XPS 15
i7-2720QM
8gb Ram
Windows 7 Home Premium SP 1
540? Something around 500 Nvidia graphics card
Ipconfig results:
Windows IP Configuration
Host Name . . . . . . . . . . . . : George-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code].....
View 14 Replies
View Related
Nov 30, 2011
I recently got a new laptop and ever since, the internet goes in and out. Most of the time it is not out long enough to display the no connectivity icon or stop music from streaming but it is noticeable. When I run the troubleshooter it says that the default gateway is unavailable. I tried manually setting the connection information but the same thing keeps happening except the troubleshooter then says that DHCP is not enabled. I've disabled every firewall I can find and updated all the drivers available. Here is my info:[CODE]
View 3 Replies
View Related
Jan 3, 2011
When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.
View 12 Replies
View Related
Feb 8, 2013
I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?
View 3 Replies
View Related
May 20, 2011
I am trying to change the password on my D-Link router. So i typed ipconfig into cmd and the default gateway i get is 169.234.95.I have tried what used to work at home such as 192.168.0.1 and all of those.
View 9 Replies
View Related
Sep 10, 2012
I have a VM server, whose IP is in customer VLAN600 ( 172.60.60.10/24 ) and Peer end is switch then Firewall.Switch is configured with same VLAN600 and learning mac-address of Server on VLAN 600, Firewall is also having VLAN600 and IP is 172.60.60.1/24.Server is not able to Ping/reach Firewall and vice versa.
View 1 Replies
View Related
Dec 18, 2012
cannot connect to my default gateway 192.168.1.1 frustrating.
View 1 Replies
View Related
May 8, 2011
Basically, I'm using a broadband modem, which appears to be connecting fine, with all the required lights being on. My ISP says that, from their end, everything is perfect. Even my laptop shows Local Area Network as connected.However, for some reason, I am not able to access the internet. I was able to use it till last evening, but suddenly the internet stopped working. On Google Chrome, it says that there is no DNS or something.Subsequently, when I tried to access my modem settings, it shows as 'webpage not available'. I then noticed that there is no default gateway! I was able to access it the day before, but now I can't.
View 10 Replies
View Related
Feb 7, 2012
i recently had to do a 30/30/30 reset to my Linksys WRT150N which has DD-WRT installed on it... I can't access the configuration settings on the router by typing in 192.168.1.1. I did IPCONFIG/ALL and couldn't nothing came up for Default Gateway.
View 4 Replies
View Related
Sep 17, 2012
It only happens with 1of my laptops, all others have not problems. In the network and sharing ctr, it intermittently says Access type: internet then suddenly I get a no internet access. I've tried release renew DNS, reboot computer, release/renew IP. When it says I have internet access, I attempt to connect to no avail.
View 7 Replies
View Related
Mar 28, 2012
I am trying to get rid of 2 old 2651xm's and 2 2950's from my CCNA days and want to get into the ASA realm. Can I be able to use the ASA, not only as a security appliance / firewall, but also be able to write the access lists, etc, to be able to use this as my router to push packets to and from my internal LAN to the outside world? I guess I should have stated as this being the front end device to my network, just after my DSL Cable modem, that is..and being the only device. I am trying to have this as my main router /firewall solution and then I have an old Linksys router I will pipe off one of the L2 ports to have an AP for my wireless devices? Is this a real solution an ASA can provide?
View 2 Replies
View Related
Oct 11, 2011
I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies
View Related
Feb 23, 2012
My ISP is changing out all the ADSL routers in our area and they have blocked the Default Gateway Address, so we can not access it via Web Browser. This is frustrating because they changed our Wi-Fi password, instead of just keeping what we had like an Einstein. They said they did it because of Hackers
View 2 Replies
View Related
Jan 15, 2013
I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.
View 11 Replies
View Related
May 12, 2012
I keep dropping off my internet connection and getting this error.
View 11 Replies
View Related
Dec 28, 2012
I had problems connecting to my wireless internet for extended periods of time with my lease expiring almost instantly. Nobody else in my house had trouble connecting, only me. Troubleshooting the connection only showed that the default gateway was not available and failed to allow me to connect despite "fixing" the problem. I attempted the ipconfig/renew, netsh int ip reset reset.log, and netsh winsock reset catalog operations in cmd as an administrator to no avail. Finally, as a last resort, I reset my modem and that finally allowed me to connect although occasionally I would be kicked off the connection and have to restart the modem again. I would still like to know the problem and a possible solution since my friends seem to have a similar problem with their wireless internet.
ipconfig/all before resetting the modem:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersOwner>ipconfig/all
Windows IP Configuration
[code]....
View 5 Replies
View Related
Sep 29, 2012
I have been having some trouble with my internet for awhile now. It fine one second and than it will get really slow and eventually stop working. When I troubleshoot to see what the problem is it either gives me DNS server is not responding or default gateway is not available, sometimes it will give me both. It says it fixes the default gateway problem but it will show up again 5 minutes later.
Here is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
View 5 Replies
View Related
Jul 3, 2011
I got a hand-me-down laptop the other day. Wireless (WLAN) works fine, but I can not connect via ethernet.
It gives the "Limited or no connectivity" message, even if the ethernet cable is unplugged (no "a cable has been unplugged" message)
The laptop is plugged in to an EWIRE modem/router. Desktop connects fine via ethernet, as does my PlayStation 3 console via wireless. So I don't think it has to do with the modem/router. It's a Compaq from 2005 or so. Windows XP Pro SP3.
System:
Microsoft Windows XP
Media Center Edition
[Code].....
I have a general knowledge of fixing the typical internet connection problem (obtain DNS automatically, repair connection, unplug modem for 20 seconds, etc) but I've never been this stumped before.
View 6 Replies
View Related
Feb 13, 2013
i'm having problem to ping succesfully default gateway on Router1 from Router2. Basically i can: - ping from R1 the serial interface on R2 and default gateway on R2 - telnet from R1 to R2 - ping from R2 to serial link on R1, BUT I CANNOT ping default gateway from R2 to R1 Below is the photo showing topology and running configuration on both routers
View 2 Replies
View Related
Jun 1, 2012
We have a Windows XP machine on our network that is giving us a strange problem. We have it statically configured with an IP and a default gateway address which points to a router on our network. This is the same router that nearly all of our machines point to and none of the other machines have this issue.If we open up CMD and make a ping request from an outside server (public or interal servers on other subnets) we get a 'destination host unreachable' error. We can ping the ip address of the router that is assigned as the default gateway. We can circumvent this ip address by adding a static route ('route add' from CMD) directing all traffic on the network interface to the ip of the router. Once this is done we can ping and get a response from any server both internal and external. We also tried doing a tracert (without have the static route added) to an external site by IP address. The tracert does not even show a hop for the router so it seems as if the request is never making it past the interface on the XP machine. We simply get an error saying it is unable to find the host. Interesting though it does provide us with a domain name for the ip address. So somehow it is able to reslove DNS. (We have a local DNS server on the same subnet)
View 7 Replies
View Related
