Not Able To Ping Default Gateway

Sep 10, 2012

I have a VM server, whose IP is in customer VLAN600 ( 172.60.60.10/24 ) and Peer end is switch then Firewall.Switch is configured with same VLAN600 and learning mac-address of Server on VLAN 600, Firewall is also having VLAN600 and IP is 172.60.60.1/24.Server is not able to Ping/reach Firewall and vice versa.

View 1 Replies


ADVERTISEMENT

Cisco :: Cannot Ping Default Gateway From R2 To R

Feb 13, 2013

i'm having problem to ping succesfully default gateway on Router1 from Router2. Basically i can: - ping from R1 the serial interface on R2 and default gateway on R2 - telnet from R1 to R2 - ping from R2 to serial link on R1, BUT I CANNOT ping default gateway from R2 to R1 Below is the photo showing topology and running configuration on both routers

View 2 Replies View Related

Cisco Wireless :: 2811 - Can't Ping Default Gateway

Jun 9, 2012

I'm trying to get a 2811 router with a NM-AIR-WLC6 Wireless Controller Module to work with an c1200 series access point. The LWAP is connected to a 2690 switch which has a trunk connected to the router. My configuration looks very similar to example 2 on this page: [URL] . The LWAP does get an IP from the DHCP pool on the router. I can also connect to the GUI of the controller from a PC on VLAN 250 (which also is connected to the switch).
 
[URL]
 
The moment I join my Wireless network I get no IP and when I enter a valid static IP, I still can't ping the gateway. I also noticed that the controller could ping the gateway before I configured the interface. After configuring an interface with that gateway, the controller loses the ability to ping to it. I can't seem to figure out why. I've been working all week on getting this controller and LWAP to broadcast a fully working network.

View 3 Replies View Related

Netgear N600 Router - Unable To Ping Default Gateway

Oct 24, 2011

about two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1

View 2 Replies View Related

Cisco Switching/Routing :: 3750 - Can't Ping The Default Gateway

May 3, 2012

This would probably sound like a stupid question but it took at least 2 hours of my time so far. I have a 3750 switch where a router and a server is connected. From the switch I can ping the router and server with no issue (directely connected). But from the server I am not able to ping the router. The router and the server are in the same subnet. The router is configured as the default router for the server. I am not able to ping the server from the router either. Here's the output of the ip route from the router. The server IP address is 10.1.200.21 and the router IP address is 10.10.200.1
 
10.0.0.0/8 is variably subnetted, 8 subnets, 3 masks
C       10.1.30.0/24 is directly connected, FastEthernet0/0.30
C       10.1.20.0/24 is directly connected, FastEthernet0/0.20

[Code].....

View 14 Replies View Related

Cisco Firewall :: Unable To Ping Default Gateway On ASA 5510

Mar 31, 2011

We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?

View 1 Replies View Related

Cisco VPN :: 3825 - Easy VPN Server / Ping Default Gateway Of 192.168.1.1?

Nov 23, 2012

I used the Cisco Configuration Professional to add an Easy VPN Server to my 3825. I'm able to connect when remote but I can't ping the default gateway of 192.168.1.1 which is in the same network as the VPN DHCP pool. I can access every single other device on the VLAN segments but not the default gateway which means when i connect I can't look at my router. And there's more,  I cannot ping anything offnet (ie 75.75.75.75).

Attached are some images which show some details from the client during the VPN connect and a few from the router (i had to use the lan switch as a jump host). If you can figure this out before I go back to the coffee shop to test this tomorrow I will send you a cake.

[code]...

View 6 Replies View Related

Cisco Switching/Routing :: SGE2010P VLan Cannot Ping Default Gateway

Oct 15, 2012

I have created two vlans, vlan 1 data and vlan 200 voice. the issue is that when an on one vlan i cannot ping the default gateway of the othe vlan from my PC. An using sge 2010p switches.
 
below is my configuration
p route 0.0.0.0 0.0.0.0 192.168.0.1
ip dhcp relay address 192.168.0.100
ip dhcp relay enable
ip dhcp information option
interface vlan 1
ip dhcp relay enable(code )

View 3 Replies View Related

Cisco Switching/Routing :: 3560G - Cannot Ping Default Gateway With Route Map Applied

Apr 11, 2012

I have a 3560G and an ASA FW, for which I am trying to use PBR to append the next hop. The gateway is the switch VLAN address and the amended net hop is the same VLAN interface on the ASA. Trouble is, I can ping the FW from a client, but not the switch. If I remove the route map, I can ping both. Even more strange is this is the case for some VLANs, but not all!
 
Config:
 
HOST ON VLAN 96
IP 10.11.120.99
S/M 255.255.255.240

[Code].....

View 2 Replies View Related

Cisco WAN :: RV016 Router - Logging / Ping Default Gateway Fail On Ixp1?

Oct 12, 2011

Loss connection every day for several hours and just comes back.  Reset router than works fine.  Only about six months old.  Found several forums staing the same problem.  I have a RV016 16 port VPN router.  What can I do? 

View 1 Replies View Related

Cisco Wireless :: 4095 With 3560 Clients Cannot Ping Default Gateway When Connected To SSID

May 21, 2013

My controller is vWLC installed in ESXi which has to vNet Cards configured with all vlans(4095), then it is connected to a 3560 switch with trunk. The configuration of the switch interface is as belows: The SSID is BYOD and I can connect the SSID and get the IP address such as 10.10.10.118/24, but for now, i cannot ping 10.10.10.1, but i can ping 10.10.10.90.

View 3 Replies View Related

Linksys Wired Router :: RV082 Gateway 2 Gateway VPN Can't Ping

Jul 26, 2012

We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network.  I am unable to ping between routers, let alone ping computers behind those routers. 
 
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic.  I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
 
To me it seems like a firewall issue at branch 2, but what's causing this.  Also they are currently running 2 differnet firmware version not sure if this would cause a problem.

View 1 Replies View Related

Cisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host

Dec 12, 2011

I set this up and I can ping all the gateways but never the hosts.  I was hoping I could make these links between 6500's a mix of L2 and L3.  Check it out.  They are connected in a linear fashion R1--->R2--->R3.  I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4.  I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration.  I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.

View 3 Replies View Related

The Default Gateway Is Not Available?

Feb 21, 2013

i joined because i keep on having the same problem. i read around the forum a bit before joining and i saw that mcafee was causing the problem for a lot of people. i dont have mcafee so that cant be it several crashes per day. like, literally close to 100 of them.

View 3 Replies View Related

Default Gateway Not Available

May 3, 2012

Periodically, I drop internet everywhere around my college's campus. I'm literally four feet from a router, but it doesn't seem to matter. I'll disconnect, run troubleshooter, and I'll get the error message saying that the default gateway is not available. My college is designed for Macs, but I'm running Windows 7. My Mac colleagues do not experience problems. The computer works at home and at nearly every other wireless network I've brought it in range of. Specifically, either IBM or Dell.

Dell XPS 15
i7-2720QM
8gb Ram
Windows 7 Home Premium SP 1
540? Something around 500 Nvidia graphics card

Ipconfig results:

Windows IP Configuration
Host Name . . . . . . . . . . . . : George-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No

[code].....

View 14 Replies View Related

Default Gateway Is Not Available?

Nov 30, 2011

I recently got a new laptop and ever since, the internet goes in and out. Most of the time it is not out long enough to display the no connectivity icon or stop music from streaming but it is noticeable. When I run the troubleshooter it says that the default gateway is unavailable. I tried manually setting the connection information but the same thing keeps happening except the troubleshooter then says that DHCP is not enabled. I've disabled every firewall I can find and updated all the drivers available. Here is my info:[CODE]

View 3 Replies View Related

No Default Gateway When Hardwired?

Jan 3, 2011

When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.

View 12 Replies View Related

Default Gateway Came Up Empty

Feb 8, 2013

I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?

View 3 Replies View Related

Possible To Use Ubuntu Box As Default Gateway

Jan 2, 2011

I have Squid proxy installed on a ubuntu box here. Currently all my PC's use my ADSL modem as their default gateway but what i wanted to do was see if it was possible to use the ubuntu box as the default gateway, and have it route through Squid to my ADSL modem.

View 3 Replies View Related

Cannot Connect To Default Gateway

May 20, 2011

I am trying to change the password on my D-Link router. So i typed ipconfig into cmd and the default gateway i get is 169.234.95.I have tried what used to work at home such as 192.168.0.1 and all of those.

View 9 Replies View Related

Cannot Connect To Default Gateway?

Dec 18, 2012

cannot connect to my default gateway 192.168.1.1 frustrating.

View 1 Replies View Related

No Internet Or Default Gateway

May 8, 2011

Basically, I'm using a broadband modem, which appears to be connecting fine, with all the required lights being on. My ISP says that, from their end, everything is perfect. Even my laptop shows Local Area Network as connected.However, for some reason, I am not able to access the internet. I was able to use it till last evening, but suddenly the internet stopped working. On Google Chrome, it says that there is no DNS or something.Subsequently, when I tried to access my modem settings, it shows as 'webpage not available'. I then noticed that there is no default gateway! I was able to access it the day before, but now I can't.

View 10 Replies View Related

DD-WRT WRT150N Default Gateway?

Feb 7, 2012

i recently had to do a 30/30/30 reset to my Linksys WRT150N which has DD-WRT installed on it... I can't access the configuration settings on the router by typing in 192.168.1.1. I did IPCONFIG/ALL and couldn't nothing came up for Default Gateway.

View 4 Replies View Related

Error - Default Gateway Is Not Available

Sep 17, 2012

It only happens with 1of my laptops, all others have not problems. In the network and sharing ctr, it intermittently says Access type: internet then suddenly I get a no internet access. I've tried release renew DNS, reboot computer, release/renew IP. When it says I have internet access, I attempt to connect to no avail.

View 7 Replies View Related

Cisco :: ASA 5505 As Default-Gateway?

Mar 28, 2012

I am trying to get rid of 2 old 2651xm's and 2 2950's from my CCNA days and want to get into the ASA realm. Can I be able to use the ASA, not only as a security appliance / firewall, but also be able to write the access lists, etc, to be able to use this as my router to push packets to and from my internal LAN to the outside world? I guess I should have stated as this being the front end device to my network, just after my DSL Cable modem, that is..and being the only device. I am trying to have this as my main router /firewall solution and then I have an old Linksys router I will pipe off one of the L2 ports to have an AP for my wireless devices? Is this a real solution an ASA can provide?

View 2 Replies View Related

Change The Default Gateway Of RDP On Server?

Oct 11, 2011

I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?

View 3 Replies View Related

ISP Blocks Default Gateway Address

Feb 23, 2012

My ISP is changing out all the ADSL routers in our area and they have blocked the Default Gateway Address, so we can not access it via Web Browser. This is frustrating because they changed our Wi-Fi password, instead of just keeping what we had like an Einstein. They said they did it because of Hackers

View 2 Replies View Related

Default Gateway Is Unavailable For Laptop

Jan 15, 2013

I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.

View 11 Replies View Related

Error Message / Default Gateway Not Available

May 12, 2012

I keep dropping off my internet connection and getting this error.

View 11 Replies View Related

Media Disconnected And Default Gateway Not Available

Dec 28, 2012

I had problems connecting to my wireless internet for extended periods of time with my lease expiring almost instantly. Nobody else in my house had trouble connecting, only me. Troubleshooting the connection only showed that the default gateway was not available and failed to allow me to connect despite "fixing" the problem. I attempted the ipconfig/renew, netsh int ip reset reset.log, and netsh winsock reset catalog operations in cmd as an administrator to no avail. Finally, as a last resort, I reset my modem and that finally allowed me to connect although occasionally I would be kicked off the connection and have to restart the modem again. I would still like to know the problem and a possible solution since my friends seem to have a similar problem with their wireless internet.

ipconfig/all before resetting the modem:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersOwner>ipconfig/all
Windows IP Configuration

[code]....

View 5 Replies View Related

Unable To Access Default Gateway

Jul 11, 2012

I am having connection issues with my laptop involving my wireless adapter (I assume), since I am able to connect to the internet via a different laptop, Xbox and phones in the household. It is a Dell M5010 and the problem has only recently occurred.

View 9 Replies View Related

DNS Server Not Responding And Default Gateway Is Not Available?

Sep 29, 2012

I have been having some trouble with my internet for awhile now. It fine one second and than it will get really slow and eventually stop working. When I troubleshoot to see what the problem is it either gives me DNS server is not responding or default gateway is not available, sometimes it will give me both. It says it fixes the default gateway problem but it will show up again 5 minutes later.

Here is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

[Code].....

View 5 Replies View Related

No Connection Via Ethernet No Default Gateway?

Jul 3, 2011

I got a hand-me-down laptop the other day. Wireless (WLAN) works fine, but I can not connect via ethernet.

It gives the "Limited or no connectivity" message, even if the ethernet cable is unplugged (no "a cable has been unplugged" message)

The laptop is plugged in to an EWIRE modem/router. Desktop connects fine via ethernet, as does my PlayStation 3 console via wireless. So I don't think it has to do with the modem/router. It's a Compaq from 2005 or so. Windows XP Pro SP3.

System:
Microsoft Windows XP
Media Center Edition

[Code].....

I have a general knowledge of fixing the typical internet connection problem (obtain DNS automatically, repair connection, unplug modem for 20 seconds, etc) but I've never been this stumped before.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved