I have a server running sbs essentials and a system running windows 7 pro, but i cant get win7 pro to join the domain on the server, i get the following message - "An attempt to resolve the DNS name of a DC in the domain being joined has failed". I need to enter the domain controller i.p as the dns on the windows 7 machine ? is this true ? if so how do I find out the domain controller i.p,
View 1 RepliesHow do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 Replies View RelatedThe coaxial"or any other metal cable" was using for transmission signals(before fiber optic) the coaxial need repeater every 2 or 3 Kilo meter,because the signal will be attenuation when pass through the cable,when we transmission electricity to far places ,we use transformer to rising the voltage to 10000 or 100000 volt
View 8 Replies View RelatedSports bar with many Tv's playing differnet games, want the ability to have tables select the tv and hear the audio for their TV,Each table to have set of small speakers and a dial to select the tv.
View 1 Replies View RelatedI have problem with using my dell studio 1537 with platronics pulsar 260 bluetooth stereo headphones. After some time listening music bluetooth just disappearing from system, bluetooth indicator is on and not reacting for wireless switch. My OS is Win7x64, mini-card driver 6.2.0.9000, bt audio driver 6.2.0.9500. With other bluetooth functions, such as bt mouse or pda sync, i have no problems.
View 21 Replies View RelatedI am running OS X version 10.7.3.My router is the time capsule. Have wireless in house, no problem. BUT, just bought a Denon AVR 1913 stereo with wireless built in, but it requires ethernet hookup to router or a wireless bridge. I Have Linksys Cisco Dual-Band Wireless-N Gaming and Video Adapter (model WET610N).Its firmware is out of date and newest version is required due to difficulties with latest version of Mac os x.I cant install WES610N to update it.
View 1 Replies View RelatedI'm having trouble connecting my PS3 to the internet. I'm too far away from my wifi router and can't get a good signal strength. I do have an ethernet cable from my pc, but apparently it only works in my pc and not on my PS3. It keeps saying: no ethernet cable connected. I've searched fora, but apparently this can be caused by a lot of things, and I dont really find a solution :s. The problem is, it has worked before, and now it doesn't. Also, ethernet on my ps3 works perfectly at my buddy's house.
I have a linksys wrt54g version 7. I installed the router myself, but if my wired connection to my pc works, and the wireless connection works for the laptop, there shouldn't be any problem I guess?Perhaps, could the laptop -which is on the router's wifi and which is halfway in between my router and my PS3 in distance- act as a wifi amplifier to my PS3? That way, the ps3 could pick up the signal from the laptop, instead of all the way from the router?
Extending Range of my wifi with > D655 >> Booster Amplifier?I am looking to extend my WIFI signal to cover 50 Acers.I currently have 35� height tower with Dir-655 in box with 3 big Omni directional Antennas. It works but covers half of 50 Acers and it is slow.I am thinking of buying 802.11b/g/n 2.3W Wifi Booster Amplifier.
View 9 Replies View RelatedI have a Dell studio 15 with Windows 7 x64 and internal Bluetooth. I am trying to install Manhattan 2800 Bluetooth bookshelf speakers. They sometimes play but disconnect intermittently. When Bluetooth disconnects I have to completely shut down and start over. (I haven't been able to fix it with just Restart.) Here is a clue: In "devices and Printers" it shows the laptop as a device: Studio 15 [properties] Selecting: [Bluetooth L2CAP Interface] -- properties/General "Device status Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)" Selecting: [Bluetooth Hands free audio] -- properties Driver= Broadcom Corp, 7/1/2009,6.2.0.9500 Digital Signer: Microsoft Windows Hardware compatibility Publisher. The speaker documentation indicates Bluetooth v1.2, class 2 and A2DP protocol support The Bluetooth icon on the bar at the bottom of the desktop disappears when the connection breaks while looking at properties. This might be related -- I also have a Kensington Bluetooth trackball mouse that has intermittent problems with connecting at start-up. When the mouse doesn't work at start-up, I can usually make it work by removing its batteries and putting them back.
Q1 - Can my internal Bluetooth devices be updated or replaced?
Q2 - Otherwise, how would a USB based Bluetooth adapter interact with my current internal Bluetooth?
My stereo bluetooth headset-Dell Byte Corseca stereo bluetooth headset is not getting detected in my Acer Laptop (Acer 4752z). The headset works fine with my mobile. My laptop too can detect other bluetooth devices like mobile phones, mono stereo headsets, bluetooth mouse without any problem. However the headset is not detected when i try "Add a Device".
View 7 Replies View RelatedWhat is the maximum operating range (distance) allowed to maintain the full transmission speed?
View 4 Replies View RelatedI can't get my router Belkin AC750 to acknowledge my stereo. It is an Onkyo TX-NR717. I am using a direct connection to router (not wireless).
View 1 Replies View RelatedSo this problem seemed to come out of nowhere, I have no idea why it started. Basically, when I use my internet, eg: opening link, loading video or downloading randomly my speakers make a grinding noise and until the noise stops (can be 1-10 seconds) my internet drops (the internet icon on the bottom right shows it is still connected but nothing loads until the noise stops. Even then, the noise can drop in and out like 10 times in a minute and is constantly messing up the internet.
my speakers are Logitech (doubt that makes much difference as I doubt the problem is linked to them and my LAN card is some Ralink thing, nothing special. Here is a low volume recording of the noise, turn up your speakers to hear it well.
i have a 5500 series WLC connected to a switch through a trunk port with 2 v WLClans. the connection works fine, but sometimes it loses connectivity. it works again rebooting the wlc.
When the problem presented, i checked the cpd neighbors on switch and it didn't show the wlc, and i checked the cdp neighbors on WLC and this shows the switch in its neighbors list. i also checked the port counters on WLC and the receiver counters keep increasing, but the transmission counters remains in the same value. then i can see that only the TX side on the controller is down, if i restart the WLC the problem disappear temporarily.
Is there a misconfiguration or a wlc bug related to this behavior?
The switch is a Catalyst 3560
The WLC controller code is 6.0.188.0
I have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.
Then I had to setup a router for a friend, and recommended the DIR-615.
Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz
So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.
My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.
It's ax Hx firmware, FW: 8.04
What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.
I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...
If I send video file(overall bit rate is 17.5Mbps) to client with 2.4Ghz band, it always freezes and go repeatedly around 1 second interval. the distance around 10m away without any wall, open space actually.
But same condition with above, cheaper wireless router no problem at all. It happens only with EA4500. And there are no any parameters setting menu actually.
I have had trouble to verify the support wireless speed and band that CISCO891W-AGN-A-K9 supports. I saw on a vendor website that it supports a max wireless transmission speed of 54Mbps but this seems low for what is supposed to be the current model wireless router which is supports 802.11n. What the maximum supported wireless speed and whether 5Ghz is supported? Plus I am thinking about purchasing it for my home wireless network (upgrading from an 871W).
View 1 Replies View RelatedI've got an AIR-AP1142N-E-K9 access point, i've got the Radio0-802.11n(2.4ghz) enabled and the 5.0ghz disabled.
i've got my client real close to the AP and i only get a connection speed of 72Mbs.
Shouldn't i get 150mbs? Maybe some wrong configuration?
the only way i can get 300mbps from this router is by having these settings, it seems the only valid settings to get 300mbps from the router are the following:
Network Mode: mixed
Channel Width: auto (20mhz or 40mhz)
Channel : 1
if i leave the channel to auto it won't show up as 300.on top of that it doesn't want to stay at 300mbps for very long, sometimes its max rate in inSSDer is only 144 or 156mbps. its the weirdest thing, i think this version of the firmware seems to forget to check for how fast its wireless transmit speed is.When it reboots it only transmits at 144 or 156mbps. i have to go in the basic wireless page and just save the settings to reset it to 300, i don't even have to change anything, it resets its max rated speed back up to 300mbps.and more importantly, are the devs aware of this problem for the e1200 v2 ?
I'm trying to modify the power transmission control of multiple Lightweight Access Points (1131 AG E K9) at one single time on WLC 4400 or WCS.It is effectively possible to configure the power transmission per LAP and in global on WLC 4400 but i need to configure it per group of LAPs =i.e group X of 10 LAPs will have a power Threshold of X -dBm and group Y of 15 LAPs with Y -dBm.
View 3 Replies View RelatedI have been disappointed by the range of the EA4500 compared to previous routers, but I am most puzzled by it's behavior. I may get an "excellent" connection close to the router (one room away) and speeds up to 65 Mps, but after a few minutes of surfing the web the signal strength and speed can drop substantially.
The problem is the worst at a distance (one floor down in our house, maybe 30 feet away in total) where the signal strength may start at "good" and a speed of perhaps 30 Mps, but then after 3-4 minutes drops to "poor" and maybe 5 Mps.
here is my setup:
Router: DIR-655 B1 2.00NA
Desktop1: DWA-160 A1 1.80 [IP: x.x.x.104]
Desktop2: DWA-160 A1 1.80 [IP: x.x.x.103]
Laptop: Intel WiFi 5300 AGN [IP: x.x.x.100]
iPad 2 (1): [IP: x.x.x.101]
iPad 2 (2):
Router Config, Status, and Inssider Report:
[URL]
560km long pipeline, intermediate station at every 30 or 40 kms. Couple of Ip phones, 2 or 3 IP camera, and few control signls (IP system) will be connected at every stations. Do not expect heavy data. Which one may be the prefered economical solution can I use
1. Ethernet network (Switch with Optical SFP ports at every site)
2. SDH equipment at every site
3. DWDM equipment (if so lower end)
I recently bought the Dlink DIR-655 router and I have a Dlink DNS 323 nas. I have them connected and working. When I send data from my PC to the DNS 323, i'm doing about 6MB/s. when I'm sending data from DNS 323 to my PC, i'm doing about 30MB/s. all 3 devices have the 1000 Mbps enabled and Jumbo frames is enabled on the DNS 323 and my PC. is this normal?
View 14 Replies View RelatedI am dropping a FIN packet in the server and sending the following request from the client
curl --local-port 56789 http://servername
At this point a session is created for the port no 56789.
Immediately ,(the port has not finished the transmission yet) , I am sending another request using the same port as following.
curl --local-port 56789 http://servername
Now the following error occurs .
curl: (7) bind failure: Address already in use
My question is how to reuse the same port (56789) again in this situation?
I am trying to lower the transmission power on my WAG160N. I thought it should be an option in my advanced wireless settings of the web based setup page, however there is only transmission rate, n transmission rate and cts protection mode.
View 1 Replies View RelatedFor an N300 model F9K1002V4 router, how can I tell if it's transmitting in N mode? I have two newer laptops that are capable of receiving the 802.11N signal but are only receiving at 54mbps. The router is set to transmit at b/g/n rates.
View 7 Replies View Relatedmy neighbors cant pick up my signal unless they are outside. can i boost the signal from my router?
View 1 Replies View RelatedI would like to connect my 1841 to the equipment that has RS-422 interface in order to transmit data. I have to buy one WIC-1T to support it. However, I am not sure that this module will be able to support RS-422 or not (As I can see there is DB25 which is the interface of RS-422, but I realize that RS-232 also has 25 pins.)
View 3 Replies View RelatedThe LSRefreshtime is 30 minutes in OSPF as per rfc 2328, So the router LSA will start after this time(30 minutes). By using router lsa only the Link State Database will be updated. Suppose the datatransmission is started when it(router) is switched on. by using Link State Database only the routing table will be updated.
View 2 Replies View RelatedIs is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies View RelatedI have a question concerning the Internet LED Status Indicator. The manual states "A solid light indicates connection on the Internet port. This LED blinks on data transmission".My router seems to be working fine but the Internet LED on my 615 is blinking orange.Reason??
View 3 Replies View Related1. Does Linksys WAG320N support USB printer? Can I connect a printer to USB-port and send some text to print from notebook via wi-fi?
2. The fact is that I have a cheap, simple chinese WiFi-ADSL-modem ZTE, which has 3 modes - low / medium / high for WI-FI signal. So, the signal is transmitted by ZTE at LOW-level is equivalent to signal, which now sends my WAG320N. When I turn ZTE on high-level, then the range of wi-fi signal increases much, comparing with the range given by WAG320N. So, where can I turn on high-mode in my WAG320N?