Wireless Transmit To Speakers From Stereo Amplifier?
Sep 18, 2012How do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 RepliesHow do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 RepliesI have a server running sbs essentials and a system running windows 7 pro, but i cant get win7 pro to join the domain on the server, i get the following message - "An attempt to resolve the DNS name of a DC in the domain being joined has failed". I need to enter the domain controller i.p as the dns on the windows 7 machine ? is this true ? if so how do I find out the domain controller i.p,
View 1 Replies View RelatedSports bar with many Tv's playing differnet games, want the ability to have tables select the tv and hear the audio for their TV,Each table to have set of small speakers and a dial to select the tv.
View 1 Replies View RelatedI have problem with using my dell studio 1537 with platronics pulsar 260 bluetooth stereo headphones. After some time listening music bluetooth just disappearing from system, bluetooth indicator is on and not reacting for wireless switch. My OS is Win7x64, mini-card driver 6.2.0.9000, bt audio driver 6.2.0.9500. With other bluetooth functions, such as bt mouse or pda sync, i have no problems.
View 21 Replies View RelatedI am running OS X version 10.7.3.My router is the time capsule. Have wireless in house, no problem. BUT, just bought a Denon AVR 1913 stereo with wireless built in, but it requires ethernet hookup to router or a wireless bridge. I Have Linksys Cisco Dual-Band Wireless-N Gaming and Video Adapter (model WET610N).Its firmware is out of date and newest version is required due to difficulties with latest version of Mac os x.I cant install WES610N to update it.
View 1 Replies View RelatedI'm having trouble connecting my PS3 to the internet. I'm too far away from my wifi router and can't get a good signal strength. I do have an ethernet cable from my pc, but apparently it only works in my pc and not on my PS3. It keeps saying: no ethernet cable connected. I've searched fora, but apparently this can be caused by a lot of things, and I dont really find a solution :s. The problem is, it has worked before, and now it doesn't. Also, ethernet on my ps3 works perfectly at my buddy's house.
I have a linksys wrt54g version 7. I installed the router myself, but if my wired connection to my pc works, and the wireless connection works for the laptop, there shouldn't be any problem I guess?Perhaps, could the laptop -which is on the router's wifi and which is halfway in between my router and my PS3 in distance- act as a wifi amplifier to my PS3? That way, the ps3 could pick up the signal from the laptop, instead of all the way from the router?
Extending Range of my wifi with > D655 >> Booster Amplifier?I am looking to extend my WIFI signal to cover 50 Acers.I currently have 35� height tower with Dir-655 in box with 3 big Omni directional Antennas. It works but covers half of 50 Acers and it is slow.I am thinking of buying 802.11b/g/n 2.3W Wifi Booster Amplifier.
View 9 Replies View RelatedI have a Dell studio 15 with Windows 7 x64 and internal Bluetooth. I am trying to install Manhattan 2800 Bluetooth bookshelf speakers. They sometimes play but disconnect intermittently. When Bluetooth disconnects I have to completely shut down and start over. (I haven't been able to fix it with just Restart.) Here is a clue: In "devices and Printers" it shows the laptop as a device: Studio 15 [properties] Selecting: [Bluetooth L2CAP Interface] -- properties/General "Device status Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)" Selecting: [Bluetooth Hands free audio] -- properties Driver= Broadcom Corp, 7/1/2009,6.2.0.9500 Digital Signer: Microsoft Windows Hardware compatibility Publisher. The speaker documentation indicates Bluetooth v1.2, class 2 and A2DP protocol support The Bluetooth icon on the bar at the bottom of the desktop disappears when the connection breaks while looking at properties. This might be related -- I also have a Kensington Bluetooth trackball mouse that has intermittent problems with connecting at start-up. When the mouse doesn't work at start-up, I can usually make it work by removing its batteries and putting them back.
Q1 - Can my internal Bluetooth devices be updated or replaced?
Q2 - Otherwise, how would a USB based Bluetooth adapter interact with my current internal Bluetooth?
My stereo bluetooth headset-Dell Byte Corseca stereo bluetooth headset is not getting detected in my Acer Laptop (Acer 4752z). The headset works fine with my mobile. My laptop too can detect other bluetooth devices like mobile phones, mono stereo headsets, bluetooth mouse without any problem. However the headset is not detected when i try "Add a Device".
View 7 Replies View RelatedI recently bought a Nintendo 3DS but unfortunately my University's wireless security (WPA2 Enterprise) is incompatible with the system. As such, I was looking for a way to transmit a wireless signal from my computer, and place an alternative form of security onto it (such as WEP), so that the 3DS can connect to it.
At the moment, my desktop is connected via ethernet cable, which plugs directly into a wall socket. I'm pretty unsure as to what to use, I've heard of things such as 'wireless bridges', but I'm not sure how they work. Also, I'm looking for the device to transmit a signal even if my desktop isn't turned on. Is a router my only option?
i have ipod but i dont have wireless modem i need software thats work from my pc as wireless modem
View 2 Replies View RelatedI can't get my router Belkin AC750 to acknowledge my stereo. It is an Onkyo TX-NR717. I am using a direct connection to router (not wireless).
View 1 Replies View RelatedI need to transfer live video and if possible video from station A to station B over wireless network. So what are the hardware requirements and setup cost...
Secondly how should i connect my CCTv cameras atleast 5 to computer's webcam so that i can transfer video over internet.
So this problem seemed to come out of nowhere, I have no idea why it started. Basically, when I use my internet, eg: opening link, loading video or downloading randomly my speakers make a grinding noise and until the noise stops (can be 1-10 seconds) my internet drops (the internet icon on the bottom right shows it is still connected but nothing loads until the noise stops. Even then, the noise can drop in and out like 10 times in a minute and is constantly messing up the internet.
my speakers are Logitech (doubt that makes much difference as I doubt the problem is linked to them and my LAN card is some Ralink thing, nothing special. Here is a low volume recording of the noise, turn up your speakers to hear it well.
I need a wireless router to transmit internet in my home, it's on two floors, my only concern is that the floor is really thick and I'm gonna be working in the basement. I need to choose between the following, can you tell me which is best?
View 1 Replies View RelatedI will be doing a site survey using the client's Cisco 1262 with only 1 radio (g/n), 3 antennas. What is the maximum transmit power, 20dBm or 23dBm? I need to set the transmit power in the Airmagnet to 50% or 3dBm down as recommended by Cisco.
View 4 Replies View Relatedthe Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies View Relatedmaximum size I can set the Transmit/Recieve Buffers to for the WMP600N wireless adapter.
View 4 Replies View RelatedI have an AP1242 near a couple of conference rooms. I get complaints when we have a large contingent in there and some try to download documents. The bandwidth consumption is meage - less than 2Mbps. But there could be say 50 people in those training rooms. I see no errors at the FE interface on the AP but I do see a good number of Transmit Discards.
Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are generally very close to the access point - within a few feet even.
If it is indicative of a configuration problem would that be an issue of the configuration of the laptop wifi cards or a problem at the AP?
I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.
View 4 Replies View RelatedI have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
I have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies View RelatedWith firmware 2.06 my DIR-600 had transmit power choices 100%, 50%, 25% and 12,5%.(even 12,5% gave me excellent strength on all my devices, what is really the difference)But after updating to firmware 2.11 (via 2.10, othervise my DIR-600 refused to use 2.11)the choices for transmit power is now only "High", "Medium" and "Low". know the percentage values for those three settings?
View 2 Replies View RelatedI am unable to transmit e-mails to a friend , using "docomo.ne.jp" as her provider, and get no assistance from mailer-daemon at this end.
View 3 Replies View RelatedI had a requirement where I have to send the internet connection over 100m.As Ethernet supports clear transmission only upto 100m, I came up with this new idea (only in papers untill now). I believe RJ11 cables (normal telephone line) would be able to carry signals over longer distance as in ADSL broadband. plug the Ethernet cable which is already connected to internet source into ADSL modem. This ADSL modem will be connected to another ADSL modem which is at a longer distance away(let us say more than 100m or so.) The output of the latter ADSL modem will be connected to a computer/router which requires an internet connection.
View 9 Replies View RelatedIs it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies View RelatedI have a TV tuner card and Wifi router. Can I transmit the TV signal through Wifi router to my Laptop. How?
View 1 Replies View RelatedWe have a major poblem going on with our VPN router.We have a 7206vxr router which has an mGRE tunnel forming EIGRP neighbourship with about 800 remote locations using GRE over IPsec.
We have a problem where the EIGRP neighbourship keeps flapping intermittently and this happens to 30-40 locations at one time and very frequently.What I noticed was that the GRE tunnel transmit bandwidth was showing as 8 Mbps. I guess there is an option to change it.Will this 8 Mbps limit cause any issues of EIGRP neighbourship flaps and will increasing the bandwidth useful.
We are also seeing output drops on the tunnel interface.
pcvpnstore#sh int tu0Tunnel0 is up, line protocol is up Hardware is Tunnel Internet address is 10.254.254.254/16 MTU 17912 bytes, BW 30000 Kbit/sec, DLY 50000 usec, reliability 255/255, txload 244/255, rxload 110/255 Encapsulation TUNNEL, loopback not set Keepalive not set Tunnel source x.x.x.x (GigabitEthernet0/2) Tunnel protocol/transport multi-GRE/IP Key 0x328CDF, sequencing disabled Checksumming of packets disabled Tunnel TTL 255 Tunnel transport MTU 1472 bytes Tunnel transmit bandwidth 8000 (kbps) Tunnel receive bandwidth 8000 (kbps) Tunnel protection via IPSec (profile "dmvpn") Last input 00:00:00, output never, output hang never Last clearing of "show interface" counters 00:17:06 Input queue: 0/800/0/0 (size/max/drops/flushes); Total output drops: 732
I upgraded my 3602i survey ap the other day to the public image the other day and I have to say.. I've got it up and going of course, but I have a concern on the transmit power settings. Originally, the only option it gave me was MAX and -4, which I hadn't seen before, interesting.. -4 of what? 20? 17 probably or I though? At any rate, I went into the CLI to set the power manually, no issues there, though my options are not what I expected, maxing out at 25mw basically, which is fine but.. in setting it manually in CLI, the web interface reports an Error on transmit power. So.. does this work or not? Any survey with this image to verify it's power settings? 15.2(23c)
View 3 Replies View RelatedWhich transmit hash policies are supported by the SLM2008? I can't find this information in any of the documentation for this switch, all that is stated is that it supports Link Aggregation using IEEE 802.3ad LACP. I'm connecting to a Netgear ReadyNAS Pro that supports Layer 2 and Layer 3+4 transmit hash policies and I'm not sure which to choose (or whether it matters).
View 2 Replies View RelatedWe have a Cisco 6513 Switch. During some parts of the day it is having large amounts of transmit discards on a certain interface because of the amount of data we are pushing. We have determined it is a link problem and not a problem with the switch. The link cannot handle the amount of packets the switch is pushing out. I was wondering if there is a way to create a buffer or a way to regulate the maximum amount of packets that can leave that interface without losing any packets?
View 5 Replies View RelatedWRV200 does not transmit packets in Router mode. This issue has been describes already here:
[url]....
So is there a solution to forcing this router function properly according to manufacturer's declaration (router mode)?
Cisco 4500-X do not support egress queing on VLAN interfaces (SVI) which means cannot do a traffic-shapping, is there a work around via policing? I can police the traffic and then on the trunk interfaces do "per-port-per-VLAN" QoS but again only the policing not shapping so I was wondering what is the effect of "exceed-action transmit" command
policy-map SHAPE
class class-default
shape-average 8000000
Versus...
policy-map POLICE
class class-default
police 8000000 4000 conform-action transmit exceed-action transmit