Denon AVR 1913 - Installing Linksys Bridge Adapter To Connect To Wireless Stereo
Jun 10, 2012
I am running OS X version 10.7.3.My router is the time capsule. Have wireless in house, no problem. BUT, just bought a Denon AVR 1913 stereo with wireless built in, but it requires ethernet hookup to router or a wireless bridge. I Have Linksys Cisco Dual-Band Wireless-N Gaming and Video Adapter (model WET610N).Its firmware is out of date and newest version is required due to difficulties with latest version of Mac os x.I cant install WES610N to update it.
View 1 Replies
ADVERTISEMENT
Nov 2, 2012
Wireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
View 1 Replies
View Related
Jul 28, 2011
I just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to anything on the screen, nor is Task Manager even showing it as a running application. I'm running Windows XP SP3 (latest updates). I tuned off the AVG virus scan. But it still just seems to hang. BTW, I used the web interface to fully configure the router and it works fine so I could get by without Cisco Connect, but it might just be easier to use.
View 4 Replies
View Related
Aug 28, 2012
I have a wi fi sky adapter,and when i plug it in,it says installing driver software. But..then it just hangs there,and eventually leads to-driver was not sucessfully installed(that is when i plug it out,but i waited more than an hour before that)I tried uninstaling and updating the driver for it,but it didnt worked.When i tried to uninstal the driver,again it just hanged.That is untill i unpluged the adapter..I have manually downloaded the latest driver,and when i check in properties it says that device is working properly.
View 19 Replies
View Related
May 8, 2012
I have installed a SumvisionSWV322P Wireless PCI Adapter in to my desktop and have configured it to run on my existing home network: I can connect no problem but after about 10 mins my whole desktop just locks up: The only way I can get out of this is by re-booting by turning the machine off completely by the on/off button. My OS is Windows XP Professional version 2002 SP3:
View 1 Replies
View Related
Jul 4, 2013
I have a Inspiron M5110 Laptop and was having some trouble staying connected to my internet so this morning I decided I would try and update the drivers. I have uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now, it won't even TRY to connect at all. In the bottom right corner, there's a red x over the wireless bars, and says No Connections are available. Before , it would have a spinning circle while trying to connect, but it doesnt have that at all anymore. My Ethernet connection is working fine, I even uninstalled and reinstalled that driver (REALTEK) and its working with no problems.
If I run IPCONFIG, the wireless adapter doesn't even show up anymore. I've tried resetting, disabling, anything I could think of. I tried several versions too of the drivers, but nothing is working. Right now, I removed it, so I have a yellow exclamation mark next to Network Controller in my Device Settings. My hardware ID for the adapter is PCIVEN_168C&DEV_002B&SUBSYS_02051028
I think from the above info, I believe the wireless adapter belongs to Atheros.how I can get this thing to even attempt to connect to a network? I'm dead in the water...
View 7 Replies
View Related
Oct 16, 2012
I have a Cisco Wlc 4402 , denon 3312 & AP 1142 all three devices are same subnet . But Airpaly not showing in Iphone. But if i put a Airport express in on these subnet then i find airplay option. How without Airport express i can enable airplay...
View 2 Replies
View Related
Nov 29, 2011
is this type of device TEW-647GA Wireless Gaming Adapter the same as a network bridge? If so, why don't they call it a network bridge, which is a more general purpose device and appeal to more buyers?If not, what is it about this gaming adapter that makes it better than a network bridge for connecting to xbox, tivo, etc?
View 1 Replies
View Related
Dec 10, 2011
I have a netgear WNR1000v2 which is on the other side of my house. There is about 70-80ft distance from it, and my desktop is on the top floor. Installing a LAN cable is not an option but a wireless bridge adapter is.I am looking for either:
• A long range Wireless adapter, PCI or PCIe
• A wireless bridge with long range
View 3 Replies
View Related
Jan 16, 2013
I configured the EA4500 to work in bridge mode, to use it as an accespoint for an existing network (Linksys WRT610N). It gets an IP address (192.168.1.141), but does not offer a wireless network (the ethernet ports do offer network acces). When I try to access the configuration on IP address 192.168.1.141 I get the Linksys Smart Wifi page asking for the password. When I enter the password, a message "Waiting" appears and that's all. It keeps me waiting forever and I cannot access the configuration settings.I have tried to reset the router (30sec. reset button, power off 30sec, power on) but the result is the same.
View 6 Replies
View Related
Nov 25, 2012
I have a server running sbs essentials and a system running windows 7 pro, but i cant get win7 pro to join the domain on the server, i get the following message - "An attempt to resolve the DNS name of a DC in the domain being joined has failed". I need to enter the domain controller i.p as the dns on the windows 7 machine ? is this true ? if so how do I find out the domain controller i.p,
View 1 Replies
View Related
Sep 18, 2012
How do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 Replies
View Related
Jul 11, 2012
Im trying to bridge my zyxel eq660r-f1 dsl modem so that i can resolve the nat issue im having in my home network. Only problem is that everytime I bridge the modem and hook my E4200 up, I cannot connect to the internet. If i connect my laptop directly to the modem, I do get internet but not through the router itself.
View 8 Replies
View Related
Mar 27, 2013
I need to setup my Aironet 1231 to connect some remote computers to a Cisco home wifi unit wirelessly. Here is what I need:
CiscoLinksys E1000 provides my wireless Internet connection in building A ----> Cisco Airnet 1231 is in building B and cat5 cable cannot be run between the buildings. Building B can see building A's wifi signal but only on one side. I need to provide wifi Internet to the entire B building. ---> Cisco 3550 PoE switch ----> another Areonet 1231 ---> Laptops via wifi.
OR
CiscoLinksys E1000 ----> Cisco Airnet 1231 ---> Wifi PC's
Either setup will work. My goal is to provide Internet access to one or more laptops via wifi. How would you set up the Areonet?
As a: Root bridge, Non-root bridge, or a Workgroup bridge?
View 2 Replies
View Related
Dec 6, 2011
I recently changed my internet connection to DSL from Cable, so now I'm using PPPoE type of connection.
Right now my router is configured as Automatic DHCP with the modem doing the PPPoE connection. All is fine and well.
Since I own a PS3, and Nat Type 3 conection is really bad for my online gaming, I would like to bridge my modem and connect to the internet through my router. That way I can properly forward my ports, use QoS and effectively get a better connection on the PS3.
I was able to successfully bridge the modem, but the PPPoE config on the router isn't able to connect to the internet.
Modem and router have been reinitialized after the configurations were changed. I do have the username and passwords, and they were properly put on the router.
View 1 Replies
View Related
Mar 4, 2013
How do I connect to the EA6500 once it's in Bridge mode acting as a wireless access point? Checked the posts and some seem to be able to do this but, we cannot.
View 6 Replies
View Related
Dec 26, 2009
I have problem with using my dell studio 1537 with platronics pulsar 260 bluetooth stereo headphones. After some time listening music bluetooth just disappearing from system, bluetooth indicator is on and not reacting for wireless switch. My OS is Win7x64, mini-card driver 6.2.0.9000, bt audio driver 6.2.0.9500. With other bluetooth functions, such as bt mouse or pda sync, i have no problems.
View 21 Replies
View Related
Mar 18, 2013
I'm starting this thread because I can't get my new Linksys AE2500 wireless use adapter to connect to my new Linksys X2000 ADSL modem. I purchased both of these devices because my old 2wire modem kept dropping the wifi signal and I had to keep turning off and on the modem in order to get the wifi signal back. Now my problem is that I can't connect my AE2500 adapter to the x2000 modem at all, heck I can't connect any wifi enabled device to the modem even though the SSID and password is correct. The adapter finds the network but it can't connect to it at all. The x2000 modem works perfectly since I can use the internet if I connect my computer to it via Ethernet cable but unfortunately I have my desktop in my room and the modem is in the living room so connecting using an Ethernet cable really isn't an option. I tried using my old 2wire modem to see if it would connect to that modem and it did as a matter of fact and the speeds were good but as of late, the speeds have been horrible and the signal drops every few minutes. I get 1 bar in the network status and speed of 1.0 Mbps. Here is a picture for reference:
The problem only persists when using wifi though because when connected to the 2wire modem, the speeds are fast. Range isn't really a problem because im like 10 feet away from the router so I'm not sure what's causing that problem. I assume it's the modem being that its about 7 years old so I would really like to get my x2000 working to see if it's better than my old 2 wire. I'm currently connected to my old 2wire modem via my AE2500 wireless usb adapter as that's the only way I can use the internet.Here's my info:
[code]....
View 4 Replies
View Related
Apr 23, 2010
I recently purchased the Linksys E3000 router. My old network set up had been 100% wired, but with the new router we have converted to wireless on some of the internet capable devices. I have 2 pc's side by side in separate room from the router that we purchased wireless adapters for, the Linksys AE1000. One pc set up fine and accesses the internet with no issues. The second pc cannot connect the network. It sees the network with a good signal strength, but it times out when trying to connect.I called tech support and have been through a variety of things with them to no avail so far.Both of these pc's are running Windows XP SP3. On the one that won't connect, have already confirmed in device manager that the adapter is correctly installed. I uninstalled it, rebooted, reinstalled it anyway with no luck. With tech support already tried disabling the 5ghz band and changing the channel on the 2.4ghz band to 11.I have confirmed several times I am entering the password in correctly, and I did pay attention to case sensitivity.When I run ipconfig/all, it says under Media State: Media Disconnected.
View 5 Replies
View Related
Apr 18, 2011
Will a realtek wireless network adapter connect to a Linksys WRT 110 router from a wood frame house to a concrete building approx. 100 ft. away
View 1 Replies
View Related
May 22, 2011
I have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies
View Related
Aug 18, 2012
I need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).
View 7 Replies
View Related
Jan 31, 2013
I have a denon avr2113 receiver wired to my router on my home network. It has internet access and shows up on the router, but it doesn't show up on my windows 7 computers, which are wirelessly connected to the same network. Any ides? Streaming is allowed on windows
View 1 Replies
View Related
Jan 7, 2011
I have Comcast broadband with one modem connected to my PC. I just bought a Denon AVR-991 Receiver that has internet capability. I I plan to use it for internet radio, etc.The problem is that each piece of equipment is in different areas of the house. I could connect the cable modem to the receiver and connect the PC to the internet via a wireless router, but I don't want to lose the speed of a direct connection on the PC.. can I have two different modems connected to the same incoming cable line? FYI, the existing modem is a Linksys BEFCMU10, and the second modem is one Comcast is in the process of sending to me as I just added Voip phone service to my account.
View 2 Replies
View Related
Aug 12, 2011
WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.
I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
View 2 Replies
View Related
Jul 30, 2011
How do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies
View Related
Aug 1, 2011
What is the best method (the one that works) to connect the E3000 with the SPA2102 phone adapter? Or, is it not possible?
View 9 Replies
View Related
Jun 27, 2011
I just installed a new router E3200.... now to install compatible USB adapter (AE2500)..... problems. The error is that the Cisco Connect software cannot find the USB adapter when I plug the AE2500 into any of the USB ports. The target machine is a lenovo T61 with XP installed.I have successfully installed the AE2500 on an older machine lenovo R52 with XP , no problems, so not the adapter.
I downloaded more recent version of Cisco Connect v 1.0.03, still no luck on T61.I also disabled firewall and virus protection, that did not work. Other possibilities I can try? I got the AE2500 for the T61, would like to get there.
View 2 Replies
View Related
Oct 2, 2012
I'm trying to share an internet connection from one laptop to another laptop but not allowed to do this wirelessly. I only have 1 ethernet port in my room. So I was wondering is it possible to plug laptop #1 into the ethernet port then bridge this connection via a usb to lan adapter.
View 1 Replies
View Related
Dec 4, 2011
How do I connect three or more WAP54G's in bridge.
View 3 Replies
View Related
Apr 5, 2012
different ways to connect a printer to the X3000. how to connect a printer to the X3000, i.e. wirelessly, USB port, or directly via one of the LAN ports. I also checked the product information for X3000 on the CISCO website and it only makes reference of the USB port as StorageLink.
. Since then I have reconsidered and now am looking to purchase the E4200V2 to connect in bridge mode to my X3000 instead of the E1500. Correct me if I am wrong but connecting the E4200V2 to my X3000 should be the same connecting the E1500 to my X3000, i.e. bridge mode? Yes or No?And my final set of questions is rregarding what would be the best set-up for adding a storage device and printer to my network once I get the E4200V2 and set it up in bridge mode?
- Should I connect both the printer and storage device to my the E4200V2?
- Should I connect them both to my X3000, which provides my internet connection?
- Should I connect one to the X3000 and one to the E4200, if so which to which for best set-up?
View 4 Replies
View Related
Feb 5, 2012
My stereo bluetooth headset-Dell Byte Corseca stereo bluetooth headset is not getting detected in my Acer Laptop (Acer 4752z). The headset works fine with my mobile. My laptop too can detect other bluetooth devices like mobile phones, mono stereo headsets, bluetooth mouse without any problem. However the headset is not detected when i try "Add a Device".
View 7 Replies
View Related
Mar 27, 2012
I recently had to reformat, and I tried to re-install my E1000 Wireless N router from the CD. Even after entering my network name and password, it said it was unable to connect to my network. My internet works fine - I just can't make my computer in control of it again. I have several devices connected wirelessly, including an Ipad, and they all get internet fine. how to get the program installed so I can change settings again?
View 1 Replies
View Related
