Transmit A Wireless Signal From PC?
Oct 3, 2012
I recently bought a Nintendo 3DS but unfortunately my University's wireless security (WPA2 Enterprise) is incompatible with the system. As such, I was looking for a way to transmit a wireless signal from my computer, and place an alternative form of security onto it (such as WEP), so that the 3DS can connect to it.
At the moment, my desktop is connected via ethernet cable, which plugs directly into a wall socket. I'm pretty unsure as to what to use, I've heard of things such as 'wireless bridges', but I'm not sure how they work. Also, I'm looking for the device to transmit a signal even if my desktop isn't turned on. Is a router my only option?
View 1 Replies
ADVERTISEMENT
Dec 10, 2012
i have ipod but i dont have wireless modem i need software thats work from my pc as wireless modem
View 2 Replies
View Related
Nov 5, 2011
I have a TV tuner card and Wifi router. Can I transmit the TV signal through Wifi router to my Laptop. How?
View 1 Replies
View Related
Mar 24, 2011
I need to transfer live video and if possible video from station A to station B over wireless network. So what are the hardware requirements and setup cost...
Secondly how should i connect my CCTv cameras atleast 5 to computer's webcam so that i can transfer video over internet.
View 1 Replies
View Related
Sep 18, 2012
How do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 Replies
View Related
Apr 29, 2011
I need a wireless router to transmit internet in my home, it's on two floors, my only concern is that the floor is really thick and I'm gonna be working in the basement. I need to choose between the following, can you tell me which is best?
View 1 Replies
View Related
Jun 10, 2012
I will be doing a site survey using the client's Cisco 1262 with only 1 radio (g/n), 3 antennas. What is the maximum transmit power, 20dBm or 23dBm? I need to set the transmit power in the Airmagnet to 50% or 3dBm down as recommended by Cisco.
View 4 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Jul 12, 2011
maximum size I can set the Transmit/Recieve Buffers to for the WMP600N wireless adapter.
View 4 Replies
View Related
Apr 15, 2013
I have an AP1242 near a couple of conference rooms. I get complaints when we have a large contingent in there and some try to download documents. The bandwidth consumption is meage - less than 2Mbps. But there could be say 50 people in those training rooms. I see no errors at the FE interface on the AP but I do see a good number of Transmit Discards.
Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are generally very close to the access point - within a few feet even.
If it is indicative of a configuration problem would that be an issue of the configuration of the laptop wifi cards or a problem at the AP?
View 2 Replies
View Related
Jan 10, 2011
I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.
View 4 Replies
View Related
Sep 13, 2011
I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
View 1 Replies
View Related
Jan 5, 2012
I have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies
View Related
Dec 15, 2011
With firmware 2.06 my DIR-600 had transmit power choices 100%, 50%, 25% and 12,5%.(even 12,5% gave me excellent strength on all my devices, what is really the difference)But after updating to firmware 2.11 (via 2.10, othervise my DIR-600 refused to use 2.11)the choices for transmit power is now only "High", "Medium" and "Low". know the percentage values for those three settings?
View 2 Replies
View Related
Mar 13, 2011
I am unable to transmit e-mails to a friend , using "docomo.ne.jp" as her provider, and get no assistance from mailer-daemon at this end.
View 3 Replies
View Related
Feb 1, 2011
I had a requirement where I have to send the internet connection over 100m.As Ethernet supports clear transmission only upto 100m, I came up with this new idea (only in papers untill now). I believe RJ11 cables (normal telephone line) would be able to carry signals over longer distance as in ADSL broadband. plug the Ethernet cable which is already connected to internet source into ADSL modem. This ADSL modem will be connected to another ADSL modem which is at a longer distance away(let us say more than 100m or so.) The output of the latter ADSL modem will be connected to a computer/router which requires an internet connection.
View 9 Replies
View Related
Feb 17, 2011
Is it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies
View Related
May 19, 2011
We have a major poblem going on with our VPN router.We have a 7206vxr router which has an mGRE tunnel forming EIGRP neighbourship with about 800 remote locations using GRE over IPsec.
We have a problem where the EIGRP neighbourship keeps flapping intermittently and this happens to 30-40 locations at one time and very frequently.What I noticed was that the GRE tunnel transmit bandwidth was showing as 8 Mbps. I guess there is an option to change it.Will this 8 Mbps limit cause any issues of EIGRP neighbourship flaps and will increasing the bandwidth useful.
We are also seeing output drops on the tunnel interface.
pcvpnstore#sh int tu0Tunnel0 is up, line protocol is up Hardware is Tunnel Internet address is 10.254.254.254/16 MTU 17912 bytes, BW 30000 Kbit/sec, DLY 50000 usec, reliability 255/255, txload 244/255, rxload 110/255 Encapsulation TUNNEL, loopback not set Keepalive not set Tunnel source x.x.x.x (GigabitEthernet0/2) Tunnel protocol/transport multi-GRE/IP Key 0x328CDF, sequencing disabled Checksumming of packets disabled Tunnel TTL 255 Tunnel transport MTU 1472 bytes Tunnel transmit bandwidth 8000 (kbps) Tunnel receive bandwidth 8000 (kbps) Tunnel protection via IPSec (profile "dmvpn") Last input 00:00:00, output never, output hang never Last clearing of "show interface" counters 00:17:06 Input queue: 0/800/0/0 (size/max/drops/flushes); Total output drops: 732
View 9 Replies
View Related
Jan 27, 2013
I upgraded my 3602i survey ap the other day to the public image the other day and I have to say.. I've got it up and going of course, but I have a concern on the transmit power settings. Originally, the only option it gave me was MAX and -4, which I hadn't seen before, interesting.. -4 of what? 20? 17 probably or I though? At any rate, I went into the CLI to set the power manually, no issues there, though my options are not what I expected, maxing out at 25mw basically, which is fine but.. in setting it manually in CLI, the web interface reports an Error on transmit power. So.. does this work or not? Any survey with this image to verify it's power settings? 15.2(23c)
View 3 Replies
View Related
Nov 2, 2011
Which transmit hash policies are supported by the SLM2008? I can't find this information in any of the documentation for this switch, all that is stated is that it supports Link Aggregation using IEEE 802.3ad LACP. I'm connecting to a Netgear ReadyNAS Pro that supports Layer 2 and Layer 3+4 transmit hash policies and I'm not sure which to choose (or whether it matters).
View 2 Replies
View Related
Feb 25, 2012
We have a Cisco 6513 Switch. During some parts of the day it is having large amounts of transmit discards on a certain interface because of the amount of data we are pushing. We have determined it is a link problem and not a problem with the switch. The link cannot handle the amount of packets the switch is pushing out. I was wondering if there is a way to create a buffer or a way to regulate the maximum amount of packets that can leave that interface without losing any packets?
View 5 Replies
View Related
Nov 24, 2011
WRV200 does not transmit packets in Router mode. This issue has been describes already here:
[url]....
So is there a solution to forcing this router function properly according to manufacturer's declaration (router mode)?
View 1 Replies
View Related
Apr 9, 2013
Cisco 4500-X do not support egress queing on VLAN interfaces (SVI) which means cannot do a traffic-shapping, is there a work around via policing? I can police the traffic and then on the trunk interfaces do "per-port-per-VLAN" QoS but again only the policing not shapping so I was wondering what is the effect of "exceed-action transmit" command
policy-map SHAPE
class class-default
shape-average 8000000
Versus...
policy-map POLICE
class class-default
police 8000000 4000 conform-action transmit exceed-action transmit
View 10 Replies
View Related
Dec 13, 2011
After opening up Solarwinds NPM, I noticed that a few of my interfaces had lots of discards (who knows how long it's been sets the counters were reset)
interface GigabitEthernet1/0/25description Etherchannel to MamaCassswitchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiatepriority-queue outchannel-group 4 mode on
interface GigabitEthernet2/0/25description Etherchannel to MamaCassswitchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiatepriority-queue outchannel-group 4 mode on
interface Port-channel4switchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiate,It looks as if priority-queue was configured outbound on these interfaces, could this be the cause of the transmit discards which are now up to 79,835, I just reset the counters on the interfaces a little while ago.
I'm not the best in the world when it comes to QoS, we do have some VoIP phones, but they are only a specific network, and do not travel outside, since there are used mainly for VoIP training. I do know both interfaces are running the default of FIFO.
View 1 Replies
View Related
Jun 2, 2013
I am using 10Gig link to connect distribution and access switches. Since we are terminating the cables at multiple locations, we are also doing the link budgeting. The CISCO SFP 10G-LR module data sheet shows two values for the transmit power one of which is maximum power .5dBm and another is minimum power -8.2 dBm. Which value should I choose for the link budgeting.
View 1 Replies
View Related
Jan 22, 2013
Cannot get on net although there is a signal.
View 1 Replies
View Related
May 9, 2011
I work on an HP desktop that used to be able to connect to the wireless network. We moved offices and and I am unable to connect to the new wireless network.The network used to appear but had no signal strength. Now the network does not even appear.
View 14 Replies
View Related
Mar 12, 2012
What is the easiest way to boost the the signal from a wireless router(1 year old), weak signal going into a different room. Yes has to go around a wall into another room.
View 7 Replies
View Related
Apr 11, 2012
I got a Wireless Dongle to make my Windows ME PC wireless.On eBay, it said it worked on Windows ME.I installed it but cannot get a wireless signal.It does not even have a management program. So I reinstalled it and still got the same result.
View 5 Replies
View Related
Jan 20, 2013
I want to connect myself on my friend router by wifi but i cannot see the network what should i do ,what usb receiver anntena is the best or what i nedd to buy and is working 100 % maybe is 400 meter is the distance but sure is not 1 mile
View 1 Replies
View Related
Feb 23, 2013
I am trying to use a pre-existing DSL modem-router config in a club house my group uses for monthly meetings. It�s a separate modem and router (Linksys or Netgear), forget modem brand. I'm unable to communicate with the owners of the equipment. If I connect to the router directly with a cat5 patch cord I can get on the internet just fine, but do not see a wireless signal from the router. I am also unable to connect with 192.168.1.1 from my laptop. I get the same message as if I'd entered a random nonsense url. I know you can go into your router and disable wireless but first you have to talk to it via 192.168.1.1 .
So I got clever and piggybacked another known good router into one of the Ethernet ports on the 1st router, and again got on the internet with a direct cat5 connection. But this time, I DO SEE the wireless signal from my 2nd router and can connect to it from the laptop, but still no internet! it's like internet access is blocked in the 1st router.
View 11 Replies
View Related
May 20, 2012
I just bought a Gateway dx4860-Ub33P.I took it to geek squad and had them upgrade the video card to Nvidia geforce GTX 560 as well as upgrading the power supply.When I set up the computer at my home office, the wireless adapter is not picking up the signals. My laptop is picking up the wireless signals just fine so I know it can't be a signal strength issue.My Gateway does detect one very weak network, but not nearly as many as my laptop. I also have Norton Antivirus installed if that is at all useful.
View 10 Replies
View Related
May 16, 2011
I have three desktops and one lap. I have TWC RCA modem and cisco linksys router and two usb adapters for wireless connection. situation is this: the modem and router are at one end of the house and one of the pc's is located at the other end. that one gets low signal strength only one or two bars and the internet works slowly to a point it feels like i'm on dial up. I've had people tell me to upgrade the router from wrt45g to n which I did to an e1000, but I still have the same issue. also was told to move the modem and router to the center of the house. but twc says that would not correct the issue.
Something about dividing the mpbs and the farther the pc the lower the signal. so, guess my question would be 1. does that sound correct to you. would it be better to move the modem and router? would it be better to have the one in question wired in? I did try an extender by netgear, which gave more bars/signal strength but but then would not connect to the internet. but I did that before I got newer linksys router. not sure if maybe I should try the extender again, but then the geek squad, when they came an set up the new router, said that it would probably do the same thing.
View 9 Replies
View Related
