LAN Connect / Can Receive But Not Transmit
Jan 10, 2011
I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.
View 4 Replies
ADVERTISEMENT
Jul 12, 2011
maximum size I can set the Transmit/Recieve Buffers to for the WMP600N wireless adapter.
View 4 Replies
View Related
Apr 26, 2011
Can receive email but cannot connect to the Internet, my user can get to all shared files on the network and get emails through exchange but cannot browse the internetWe turned off the firewall and checked DNS and the IP. It says the local area connection is connected. We added IE to the exceptions tab in firewall.
View 1 Replies
View Related
Jan 12, 2012
I have problems in the following scenario. I attached an image with a summary diagram of the network in question. The problem is that on the 3rd floor of the site users connect via wireless fail to connect and receive an IP. But they can not navigate. The second and first floor itself. As you see in the diagram are 3 routers, one per floor. The first is the only router that provides DHCP the other two routers are as simple Access Points.
View 13 Replies
View Related
Jul 2, 2011
I'm working on a project in which we have to transfer our mobile phone calls via internet and our mobile should be connected to pc via bluetooth. This is pretty easy at dialer's end but how to recieve the call via internet on some pc and direct it to the reciever via bluetooth.
View 2 Replies
View Related
Nov 12, 2011
I have a Dell Insipron Mini 1011 and recently I haven't been able to connect to the internet. The network connection says it's connect to linksys, but it sends out more packets than it receives. What can I do to get it to receive more packets? Could it be my area that's causing it not to connect?
View 1 Replies
View Related
Feb 3, 2013
My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies
View Related
Jan 17, 2013
The Lg840g is a tracfone with wifi capability. I get strong wifi signal and connection at home, but receive failure to connect to requested host message when I open the browser. This phone works at wayport wifi, so I assume it's a compatibility problem with the router. Is there a fix? (Router works great with our Acer and Kindle tablets though.)
View 1 Replies
View Related
Oct 3, 2012
I recently bought a Nintendo 3DS but unfortunately my University's wireless security (WPA2 Enterprise) is incompatible with the system. As such, I was looking for a way to transmit a wireless signal from my computer, and place an alternative form of security onto it (such as WEP), so that the 3DS can connect to it.
At the moment, my desktop is connected via ethernet cable, which plugs directly into a wall socket. I'm pretty unsure as to what to use, I've heard of things such as 'wireless bridges', but I'm not sure how they work. Also, I'm looking for the device to transmit a signal even if my desktop isn't turned on. Is a router my only option?
View 1 Replies
View Related
Dec 10, 2012
i have ipod but i dont have wireless modem i need software thats work from my pc as wireless modem
View 2 Replies
View Related
Jan 5, 2012
I have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies
View Related
Mar 24, 2011
I need to transfer live video and if possible video from station A to station B over wireless network. So what are the hardware requirements and setup cost...
Secondly how should i connect my CCTv cameras atleast 5 to computer's webcam so that i can transfer video over internet.
View 1 Replies
View Related
Dec 15, 2011
With firmware 2.06 my DIR-600 had transmit power choices 100%, 50%, 25% and 12,5%.(even 12,5% gave me excellent strength on all my devices, what is really the difference)But after updating to firmware 2.11 (via 2.10, othervise my DIR-600 refused to use 2.11)the choices for transmit power is now only "High", "Medium" and "Low". know the percentage values for those three settings?
View 2 Replies
View Related
Mar 13, 2011
I am unable to transmit e-mails to a friend , using "docomo.ne.jp" as her provider, and get no assistance from mailer-daemon at this end.
View 3 Replies
View Related
Feb 1, 2011
I had a requirement where I have to send the internet connection over 100m.As Ethernet supports clear transmission only upto 100m, I came up with this new idea (only in papers untill now). I believe RJ11 cables (normal telephone line) would be able to carry signals over longer distance as in ADSL broadband. plug the Ethernet cable which is already connected to internet source into ADSL modem. This ADSL modem will be connected to another ADSL modem which is at a longer distance away(let us say more than 100m or so.) The output of the latter ADSL modem will be connected to a computer/router which requires an internet connection.
View 9 Replies
View Related
Feb 17, 2011
Is it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies
View Related
Nov 5, 2011
I have a TV tuner card and Wifi router. Can I transmit the TV signal through Wifi router to my Laptop. How?
View 1 Replies
View Related
Sep 18, 2012
How do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 Replies
View Related
May 19, 2011
We have a major poblem going on with our VPN router.We have a 7206vxr router which has an mGRE tunnel forming EIGRP neighbourship with about 800 remote locations using GRE over IPsec.
We have a problem where the EIGRP neighbourship keeps flapping intermittently and this happens to 30-40 locations at one time and very frequently.What I noticed was that the GRE tunnel transmit bandwidth was showing as 8 Mbps. I guess there is an option to change it.Will this 8 Mbps limit cause any issues of EIGRP neighbourship flaps and will increasing the bandwidth useful.
We are also seeing output drops on the tunnel interface.
pcvpnstore#sh int tu0Tunnel0 is up, line protocol is up Hardware is Tunnel Internet address is 10.254.254.254/16 MTU 17912 bytes, BW 30000 Kbit/sec, DLY 50000 usec, reliability 255/255, txload 244/255, rxload 110/255 Encapsulation TUNNEL, loopback not set Keepalive not set Tunnel source x.x.x.x (GigabitEthernet0/2) Tunnel protocol/transport multi-GRE/IP Key 0x328CDF, sequencing disabled Checksumming of packets disabled Tunnel TTL 255 Tunnel transport MTU 1472 bytes Tunnel transmit bandwidth 8000 (kbps) Tunnel receive bandwidth 8000 (kbps) Tunnel protection via IPSec (profile "dmvpn") Last input 00:00:00, output never, output hang never Last clearing of "show interface" counters 00:17:06 Input queue: 0/800/0/0 (size/max/drops/flushes); Total output drops: 732
View 9 Replies
View Related
Apr 29, 2011
I need a wireless router to transmit internet in my home, it's on two floors, my only concern is that the floor is really thick and I'm gonna be working in the basement. I need to choose between the following, can you tell me which is best?
View 1 Replies
View Related
Jun 10, 2012
I will be doing a site survey using the client's Cisco 1262 with only 1 radio (g/n), 3 antennas. What is the maximum transmit power, 20dBm or 23dBm? I need to set the transmit power in the Airmagnet to 50% or 3dBm down as recommended by Cisco.
View 4 Replies
View Related
Jan 27, 2013
I upgraded my 3602i survey ap the other day to the public image the other day and I have to say.. I've got it up and going of course, but I have a concern on the transmit power settings. Originally, the only option it gave me was MAX and -4, which I hadn't seen before, interesting.. -4 of what? 20? 17 probably or I though? At any rate, I went into the CLI to set the power manually, no issues there, though my options are not what I expected, maxing out at 25mw basically, which is fine but.. in setting it manually in CLI, the web interface reports an Error on transmit power. So.. does this work or not? Any survey with this image to verify it's power settings? 15.2(23c)
View 3 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Nov 2, 2011
Which transmit hash policies are supported by the SLM2008? I can't find this information in any of the documentation for this switch, all that is stated is that it supports Link Aggregation using IEEE 802.3ad LACP. I'm connecting to a Netgear ReadyNAS Pro that supports Layer 2 and Layer 3+4 transmit hash policies and I'm not sure which to choose (or whether it matters).
View 2 Replies
View Related
Feb 25, 2012
We have a Cisco 6513 Switch. During some parts of the day it is having large amounts of transmit discards on a certain interface because of the amount of data we are pushing. We have determined it is a link problem and not a problem with the switch. The link cannot handle the amount of packets the switch is pushing out. I was wondering if there is a way to create a buffer or a way to regulate the maximum amount of packets that can leave that interface without losing any packets?
View 5 Replies
View Related
Nov 24, 2011
WRV200 does not transmit packets in Router mode. This issue has been describes already here:
[url]....
So is there a solution to forcing this router function properly according to manufacturer's declaration (router mode)?
View 1 Replies
View Related
Apr 9, 2013
Cisco 4500-X do not support egress queing on VLAN interfaces (SVI) which means cannot do a traffic-shapping, is there a work around via policing? I can police the traffic and then on the trunk interfaces do "per-port-per-VLAN" QoS but again only the policing not shapping so I was wondering what is the effect of "exceed-action transmit" command
policy-map SHAPE
class class-default
shape-average 8000000
Versus...
policy-map POLICE
class class-default
police 8000000 4000 conform-action transmit exceed-action transmit
View 10 Replies
View Related
Apr 15, 2013
I have an AP1242 near a couple of conference rooms. I get complaints when we have a large contingent in there and some try to download documents. The bandwidth consumption is meage - less than 2Mbps. But there could be say 50 people in those training rooms. I see no errors at the FE interface on the AP but I do see a good number of Transmit Discards.
Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are generally very close to the access point - within a few feet even.
If it is indicative of a configuration problem would that be an issue of the configuration of the laptop wifi cards or a problem at the AP?
View 2 Replies
View Related
Dec 13, 2011
After opening up Solarwinds NPM, I noticed that a few of my interfaces had lots of discards (who knows how long it's been sets the counters were reset)
interface GigabitEthernet1/0/25description Etherchannel to MamaCassswitchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiatepriority-queue outchannel-group 4 mode on
interface GigabitEthernet2/0/25description Etherchannel to MamaCassswitchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiatepriority-queue outchannel-group 4 mode on
interface Port-channel4switchport trunk encapsulation dot1qswitchport mode trunkswitchport nonegotiate,It looks as if priority-queue was configured outbound on these interfaces, could this be the cause of the transmit discards which are now up to 79,835, I just reset the counters on the interfaces a little while ago.
I'm not the best in the world when it comes to QoS, we do have some VoIP phones, but they are only a specific network, and do not travel outside, since there are used mainly for VoIP training. I do know both interfaces are running the default of FIFO.
View 1 Replies
View Related
Jun 2, 2013
I am using 10Gig link to connect distribution and access switches. Since we are terminating the cables at multiple locations, we are also doing the link budgeting. The CISCO SFP 10G-LR module data sheet shows two values for the transmit power one of which is maximum power .5dBm and another is minimum power -8.2 dBm. Which value should I choose for the link budgeting.
View 1 Replies
View Related
Sep 13, 2011
I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
View 1 Replies
View Related
Feb 21, 2013
For the past 2 days I have been having a problem with my laptop taht, actually a bit old. I also have another pc, a desktop, with a d-link modem and wireless router (DIR-615). The problem is that I can't go on the internet with my laptop, because of a certrain error on the Intel PROSet Troubleshoot: "Did not receive IP addresss", in fact the IP address was written as 0.0.0.0, and when I open the internet browser I can't go on to any page. IO have tried everything, believe me, from switching off every thing, to reinstalling the router, but nothing seems to resolve the error.
View 12 Replies
View Related
Aug 3, 2011
i use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?
View 1 Replies
View Related
