Wireless Fail To Connect And Receive IP

Jan 12, 2012

I have problems in the following scenario. I attached an image with a summary diagram of the network in question. The problem is that on the 3rd floor of the site users connect via wireless fail to connect and receive an IP. But they can not navigate. The second and first floor itself. As you see in the diagram are 3 routers, one per floor. The first is the only router that provides DHCP the other two routers are as simple Access Points.


Linksys Wireless Router :: EA3500 Phones Connect To Wi-Fi But Cannot Sens / Receive Data

Feb 3, 2013

My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it.  The phones work completely fine elsewhere.  Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again.  Now it is constantly.  I restarted the modem, default reset it and still nothing.  I get an IP address too and it stays connected.  Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.

View 7 Replies View Related

Linksys Wireless Adapters :: AE2500 Pick Up Only One Network And Fail To Connect

Sep 1, 2011

I can connect via to E4200 with old laptop via G. Great signal and speed (54mps).No such luck on same machine with AE2500(G adapter disabled). Can't find any but one network(neighbors).CD software can't find adapter.I install the adpter manually using normal xp device discovery steps.Seems like there is quite a few AE2500 issues. Should I ask for RMA return? No point in wasting more time in trying to fix Cisco's tech issue.

View 4 Replies View Related

LAN Connect / Can Receive But Not Transmit

Jan 10, 2011

I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.

View 4 Replies View Related

Can Receive Email But Cannot Connect To The Internet?

Apr 26, 2011

Can receive email but cannot connect to the Internet, my user can get to all shared files on the network and get emails through exchange but cannot browse the internetWe turned off the firewall and checked DNS and the IP. It says the local area connection is connected. We added IE to the exceptions tab in firewall.

View 1 Replies View Related

Connect Mobile To Pc Via Bluetooth To Receive Calls Through Internet?

Jul 2, 2011

I'm working on a project in which we have to transfer our mobile phone calls via internet and our mobile should be connected to pc via bluetooth. This is pretty easy at dialer's end but how to recieve the call via internet on some pc and direct it to the reciever via bluetooth.

View 2 Replies View Related

Cisco WAN :: 2960 Should One Server Fail Other Will Act As Fail Over

Feb 22, 2012

We have two Cisco 2960 TT-L switches. I'd like to reduce single points of failure and have dual servers for most tasks. For example, two firewall servers and two web servers. Should one server fail the other will act as a failover.I'd like to extend the redundancy to the switches, and am thinking of connecting one web server to one switch, and one to the other. In the event a switch failed a set of servers would still run, and be able to talk to each other.I'd like to run two VLANs, one for the LAN, and one of the WAN, and connect the two VLANs on each of the switches with the associated VLAN on the other switch.

View 3 Replies View Related

Fail To Connect With Net Through Wifi

Mar 4, 2011

fail to connect with net through wifi

View 1 Replies View Related

Dell :: Inspiron Mini 1011 Won't Receive Enough Packets To Connect To Internet

Nov 12, 2011

I have a Dell Insipron Mini 1011 and recently I haven't been able to connect to the internet. The network connection says it's connect to linksys, but it sends out more packets than it receives. What can I do to get it to receive more packets? Could it be my area that's causing it not to connect?

View 1 Replies View Related

Belkin Routers :: LG840g Receive Failure To Connect To Requested Host Message / When Open Browser

Jan 17, 2013

The Lg840g is a tracfone with wifi capability. I get strong wifi signal and connection at home, but receive failure to connect to requested host message when I open the browser. This phone works at wayport wifi, so I assume it's a compatibility problem with the router. Is there a fix? (Router works great with our Acer and Kindle tablets though.)

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 / Fail To Connect Mail Server

Mar 10, 2013

Region : Denmark
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n

I have a TL-MR3420 router placed in a remote location. The internet connection is via 3G, and since the telco is shifting the IP every 24 hours, the router is configured with DDNS from no-ip.org. This is working OK most days, but sometimes the DNS fails to update. To be able to trobleshoot it, I am trying to make my router send a mail with the logfile every hour. This function seems to be easy and out-of-the-box, but it doesn't wiork. Whenever I try to mail the log I get the error message "Fail to Connect the mail server.".

It is not possible to enter another SMTP-port, so I asume the standard port 25 (like this thread). Most ISP-mail services require SSL/TLS and/or use an alternative port, so I have made my own server. This server is visible on the Internet, and I (and others) are able to connect and send mails using smtp on port 25. But, still my remote TL-MR3420 keep saying "Fail to Connect the mail server.". I have tried nearly everything, including disabling authentication and giving the IP-address of the smtp server directly instead of the URL.

View 1 Replies View Related

Wireless :: Cannot Read And Receive Emails

Apr 9, 2011

cannot read and receive emails

View 1 Replies View Related

Wireless :: Can Send Emails But Not Receive Them?

May 5, 2011

I recently migrated keeping my original email address. All went well, except I am unable to receive emails from one of my contacts. I can send to this individual successfully, but when the contact tries to respond the reply kicks back to him telling him that there was a delivery notice failure. Email addresses have been verified by both of us and both are accurate

View 2 Replies View Related

Wireless :: Can't Get Any Pages To Load / Send And Receive E-mail

May 26, 2011

I can connect to my mom's wireless network but now all of a sudden I can't get any pages to load. All I get is this page cannot be displayed screen. My computer shows I'm connected with an excellent signal but I can't get any pages to load, I can't even send and receive my e-mail.

View 2 Replies View Related

Dell :: 14R5420 Wireless Card Can't Receive Driver

Oct 31, 2012

I have my Dell Laptop with model 14R5420, service tag <Admin Note:service tag removed per privacy policy~RK>. It runs normally on Win 7. However, when I upgrage to Win 8, the wireless card can not receive the driver. I list below what I did.

- Download all drivers for my laptop which compatible Win 8 64 bit by using my service tag .

- Install Win 8 (format disk label C)

- Run Bios Driver to flash BIOS

- Set up all other downloaded drivers

All devices work perfectly except the wireless card. In Device Manager, there is still an unrecognized device name Network Device. I know that is the wireless card.If I run my backup to Win 7, everything is normal.

View 2 Replies View Related

Wireless :: Receive Router Signals At Laptop But No Internet Access?

Aug 19, 2011

i receive my router signals at my laptop but no internet access. i am receiving this problem from last 2,3 days. Before this it was working fine. I have reset the router settings many time but no results. i get the signals at my laptop but i cant access the internet . some times i got DNS server error.

View 1 Replies View Related

Windows Association Failed - Did Not Receive Any Response From Wireless Router

Dec 11, 2012

Windows association failed because Windows did not receive any response from the wireless router or access point. This is the message I have just got out of the blue from my laptop. it is showing that there is excellent strength... And I am also on my iPad connected to this connection.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Unable To Receive Dynamic IP

Nov 26, 2012

Region : Sweden
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : TL-WR1043ND_V1_120405_
ISP : Tele2 (fiber)

I recently bought your router and I am trying to install it.The problem that I get is that when the router tries to get the dynamic IP from my provider, it gets nothing.I have typed in the DNS servers but no go. Without the router, my uplink works fine. The provider does not lock onto a specific MAC adress.

View 8 Replies View Related

Linksys Wireless Router :: E100 Can't Receive Any Internet From Modem

Mar 28, 2012

my router cant receive any internet from my modem. my internet ip when it is connected is  . when my modem is directly connected to the computer, it works fine, i can access the internet, but when it's connected on the router, this problem occur. iv'e tried the solution on the e300(something , i have forgot )  but it didnt work for me. my ISP is DSL btw. i have brought my router on the shop and it works fine. i even brought my CPU at the shop and used my router there and it works also just fine. Their ISP is also DSL . So base from these i've concluded that the problem is my modem?

View 8 Replies View Related

Linksys Wireless Adapters :: Wmp600n Did Not Receive Response From Router

Jan 27, 2011

I'm having trouble connecting using this new card i bought. i have installed the latest drivers and i can find networks and the signal strength is good too but when trying to connect after ive entered the passkey i get the message " no network found" or "did not receive response from router" or something along those lines. i can connect with my older card which is a wmp54g but that one shows less signal strength and my connection breaks from time to time (hence the upgrade to wmp600n) on a sidenote, my wmp600n card works perfectly fine under linux but i want it to run in windows (mainly for gaming) Im running windows vista 64 bit and the wmp600n has the latest drivers installed.

View 3 Replies View Related

Cisco Wireless :: Clients Receive Wrong DNS Suffix Wap4410n?

Feb 21, 2012

Suddenly after more than a year of running fine, my wap seems to be giving all clients a bad DNS suffix which of course breaks DNS resolution internally (no problem with internet resolution).  I assume it's a wap problem since all of my wired clients receive the correct suffix.  I'm using a RVS4000 router if that makes any difference.

View 2 Replies View Related

Linksys Wireless Adapters :: Set Transmit / Receive Buffers To For WMP600N

Jul 12, 2011

maximum size I can set the Transmit/Recieve Buffers to for the WMP600N wireless adapter.

View 4 Replies View Related

Wireless :: Tp Link Td-w8901g Modem Receive Wifi Signals Through Wan And Give Out Through Lan

Jan 31, 2012

I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.

View 1 Replies View Related

Can Newer Toshiba Laptop Be Configured To Receive 5Ghz Wireless Channel

Mar 21, 2012

I'm looking at a dual-channel wireless-N router that transmitts at 2.4Ghz and 5Ghz, but none of our newer laptops even recognize the 5Ghz channel. Is there a configuration setting to change what frequency laptops can recognize? Looking to put 2 newer modle Toshiba loptops on the 5Ghz channel and leave two other...older systems on the 2.4Ghz channel.

View 5 Replies View Related

Linksys Wireless Router :: Can WES610N Receive Signal From Verizon 4G Jetpack?

Sep 15, 2012

I need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?

View 1 Replies View Related

Linksys Wireless Router :: Outlook 2007 Very Slow To Receive Gmail On E4200

Jul 16, 2012

Outlook 2007 worked fine with my old router and when our laptops are connected on other networks.  But both home laptops take about a minute to go through the "receiving mail" process with GMAIL pop3 accounts when connecting through the new E4200.  Everything is factory default, and I reinstalled Outlook.  This problem does not occur with the roadrunner email accounts also set up in Outlook

View 7 Replies View Related

Cisco Wireless :: WISMs Version / CPU Receive Multicast Queue Is Full On Controller?

Feb 21, 2012

I'm seeing the alert "CPU Receive Multicast Queue is full on Controller" on the WCS from one of my controllers. This is during peak hours and on a pretty busy WLC. I can't find any related lines in the logfiles. I'm currently running software version on a WISMs.

View 13 Replies View Related

Wireless Internet Connection Fail

May 18, 2011

my computer cannot access Internet at all. It finds all the wireless routers and can connect to them, but says that the router cannot access Internet. However, it can. All other devices connected to the router have full Internet access. I've tries rebooting computer, rebooting router, reconnecting to router, reinstalling wireless Internet driver, but still nothing

View 4 Replies View Related

Wireless Virus Update Connection Fail

Jun 16, 2012

virus update conection fail how i solve it in windows8

View 1 Replies View Related

Wireless Ethernet Fail After Windows 8 Pro Upgrade?

Dec 12, 2012

Just upgraded to Win8 Pro last night by wi-fi. Cannot access internet router via ethernet cable. Cannot access wireless either.

Using Network & Internet troubleshooting for Internet Connections, I get:

Problem with wireless adapter or access point Not Fixed X "Local Area Connection" doesn't have a valid IP configuration Not Fixed X

If I do a ifconfig, I see that LAN has its media disconnected. But not wireless. HP Pavillion dv1190us Notebook PC.

View 1 Replies View Related

Cisco Wireless :: 5508 / WLC Proxy ARP Fail

Jun 9, 2013

I have a lab network setup at my house with similar equipment to our office that I use for testing different features and functionality.  Since I have had this installed (~ 2 years) I've had an intermittent but recurring problem with connectivity to various wireless devices that I have never been able to fully resolve.I have a 5508 Wireless controller with a handful of 3502i APs spread throughout my house.  The controller is connected to a 3560X switch.  And I have an ASA 5510 firewall as my Firewall/Internet Gateway. When I work from home I most often work from a desktop computer in my office and have a Windows RDP session to a laptop located in another room in my house on one of my monitors as a working space (I know this is weird but there is a good reason).  This laptop is connected via WiFi at all times.Occasionally, I will lose connectivity to this laptop (or not be able to connect back to my desktop from it) and have to start an extended ping from the laptop to the desktop to re-establish connectivity.  A while ago I performed some deeper analysis on what was happening and what I found is that when the connectivity breaks the problem is that the desktop is unable to resolve the MAC address of the laptop.  It sends out ARP requests but never receives any reply back.
Why would the controller stop replying to ARP requests for the IP address of the laptop?If I log into the controller while this is happening it shows the laptop as a connected client, and has its IP address and MAC address listed fine in the clients section.  In order to avoid getting up every time I need to reconnect, I normally hop to a system I control across one of my VPN tunnels via RDP, then connect BACK to the laptop and start the ping to re-establish connectivity back to my main desktop machine.  This works because the firewalls ARP cache hasn't cleared yet.  And then everything works fine again... unless I manually clear my ARP cache.  Sometimes clearing the ARP cache will result in the exact same problem again and I will lose connection.  Other times it seems to repopulate almost immediately and the connection doesn't drop.
A wireshark debug from the desktop reveals that ARP requests simply go out with no reply, confirming what is happening.As a note, I have set both the User Idle Timeout and the ARP timeout to 24 hours to try but this has not had any effect.This problem seems to go away and then come back.  In fact, I havent been experiencing this issue for probably a couple months recently and then it just started again in the last few days which is why I am back to posting here.  No changes to the network were made in the meantime that could account for this change in behavior.  I am currently running version but this behavior has persisted through at least four software upgrades so I don't think it's an issue with a specific version but I don't really know.I occasionally epxerience connectivity issues in my house to other devices as well that I use less often like a printer, network camera, apple tv so I now feel like these issues are likely all related.

View 5 Replies View Related

Cisco Wireless :: AIR-LAP1262N-E-K9 Fail To Boot?

May 19, 2012

i have 1262 LAP which is fail to boot and went to rommon mode
here are the logs
ap: boot
Loading ""...: permission denied
Error loading ""


View 5 Replies View Related

Cisco Wireless :: Set Up Fail Over Capability On Two Active WLC 5508

Mar 18, 2013

for some reason some AP's are terminating the association to either one of the controllers for a short period of time. When this happens and the AP re-associates itself with either of the active controllers, it looses the information of what group it previously belonged; and it gets dropped in the default group, broadcasting every single SSID available.
What I would like to see happen is that if for some reason an AP terminates association, but restablishes it shortly; it can automatically go to the correct group.
Both WLC are running the same version and have the same amount of licenses, they can hold all the AP's one of the WLC came down. Config-wise they are identical except that the groups are named differently but ultimately configured the same. If that is an issue we can change it no problem since it's only the name.

View 5 Replies View Related

Cisco Wireless :: 1231 Fail To Register To Primary WLC

Oct 29, 2011

We have found that only Cisco 1231 WAP are exhibiting this behaviour. Their Primary WLAN controller is Cisco1 WLC but they fail to register to Primary WLC and fall back to Cisco2 WLC. After about 200 sec , they attempt to connect to Primary WLC once again and fail. The whole cycle is repeated every 250 seconds.

View 3 Replies View Related

Cisco Wireless :: 1410 Bridges Link Fail?

Jun 22, 2011

I have a point to point link of 9.27 km using 1410 bridges and AIR-ANT58G28SDA-N antennas as per the documentation that would be an easy to deploy link and it should work at 54 Mbps, eventhough it drops the link, it's so slow and the power measurments indicate -70 dbm (aprox) right under the antenna which is at 9 m height.
This is not the first time I have troubles with 1410 bridges, the other two times I had to change them for 1310 bridges. I wonder if it has to do with some configuration tunning like, external antena gain, link distance or anything else? By the wat this is ocurring in México don't know if that might be worth of taking into consideration in order to deploy a 1410 link.

View 3 Replies View Related

Linksys Wireless Router :: Fail To Open Ports E4200v1

Jan 4, 2013

im moving over to VDSL.But now i cant open any ports on the E4200 no mather what i do.It worked with the previous modem, but now i cant open anything. all the ports seems to be closes, 80, 21 etc, and the ports i manually forrward.The previous modem was a ZyXEL P-2602HWT-F3, and the new one is a ZyXEL P-2812HNU-F3.If i connect directly into the ZyXEL P-2812HNU-F3, every ports seems to be open, port 80 is open, port 21 is open, but not on the E4200, and yes, i have tried open the FTP ports.I have tried the 30/30/30 reset on the E4200.

View 6 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N - Setup Connection Fail?

Feb 22, 2013

Region : China
Model : TL-WR740N
Hardware Version : V1
Firmware Version :

tried to run the easy setup assistant but failed the connection test. The WLAN indicator did not flash or light up, don't know if that is the problem.

Have checked the cables and they are working fine. As this router is 3 yrs old, should I get a new one? Does it appear to be a hardware problem?

View 7 Replies View Related

Linksys Wireless Router :: All 3 AE2500s Fail On A Single Computer?

Dec 4, 2012

I purchased 3 AE2500s to connect 3 machines in my house.2 of the machines it works great. However on the 3rd machine, when I start browsing around (2.4Ghz or 5Ghz), things start going wonky and then the device basically loses connection, and the LED indicator starts flashing consistently indefinitely (with no connection).Removing and reconnecting the USB device will allow me to reconnect to my network and do stuff until it happens again. Speedtests on speedtest.net ALWAYS fail on upload test, I lose connection then.Streaming a movie across the network immediately causes this (exclamation mark on network icon) Regular browsing causes it also Checking event logs, I get the following error wlan extensibility module has stopped bcmihvsrv.dll The router is an E4200 I have tested all 3 AE2500s on this single machine, and they all do the same thing.Out of the 3 machines ONLY the one that doesn't work is Windows 7 32bit, the other 2 that do work are Windows 7 64bit Considering the event log is complaining about bcmihvsrv.dll, I know the 64bit version uses bcmihvsrv64.dll, could it be a bug in the 32bit drivers?I have attempted at trying different slots, uninstalling the drivers, removing and disabling any other network components in this single machine, lowering the power output in the advanced options, tried 2.4ghz and 5ghz, tried Wireless G only and then Wireless N only...

View 9 Replies View Related

Cisco AAA/Identity/Nac :: Wireless Clients Fail SSL / TLS Handshake And Reject ACS 5.2

Aug 29, 2011

I have a problem where wireless clients at a remote site cannot successfully authenticate through their WLC to my ACS 5.2 (Linux on VM). I have three sites where this authentication is functioning properly; at my fourth site the wireless clients fail with a PEAP error: "12321 PEAP failed SSL/TLS handshake because the client rejected the ACS local-certificate". My wireless clients are Win7 using WPA2-Enterprise security type with AES encryption. The authentication method is set to Microsoft PEAP (EAP-MSCHAP v2) and the 'Validate server certificate' is not checked. My wireless access rules on ACS 5.2 are working well at three sites. My ACS 5.2 has a self-signed certificate that doesn't expire until August 2012. A laptop that can successfully authenticate at other sites cannot authenticate at the fourth site.
Phase one of the PEAP process is where the client authenticates the server certificate and the TLS tunnel is created so that in phase two user authentication credentials are sent through the TLS tunnel using EAP. My clients do not seem to be able to create the TLS tunnel because they reject the ACS local certificate; thus, user credentials are never passed and authentication fails. I have renewed the ACS local certificate and rebooted the ACS server but the problem persists. My WLAN on the WLC has its security policy set to [WPA + WPA2][Auth(802.1X)]. WPA uses TKIP and WPA2 uses AES; Auth Key Mgmt is set to 802.1X. The remote site where authentication fails is a different domain; the other three sites are the same domain.
I can see the failed authentication attempts in my ACS "Monitoring and Reports | Reports | Catalog | AAA Protocol | RADIUS Authentication" report. They all fail with the same PEAP error: 12321 PEAP failed SSL/TLS handshake because the client rejected the ACS local-certificate. The ACS local certificate works fine at three sites--just not at the fourth. Is my problem the certificate or is it an 802.1X client problem?

View 4 Replies View Related

TP-Link Dual-Band Wireless :: Wdr3500 Fail To Transfer File

May 13, 2013

Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :

wdr3500 problem with usb external hard drive when I try to transfer files from computer to usb on the router it'll work for small files like MP3. But files like MKV where they can be 1-2gb will cause a disconnect and fail to transfer the file. The whole drive would disconnect and windows will give an I/O error.

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Slows Down Speed And Makes Many Downloads Fail

Jul 25, 2011

I can't get utube videos when I'm going through the router.  I can get them if I'm on the modem only.  The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites.  It just slows down eventually to a standstill and the download fails.  As stated when the router is not connected the above items pop up or download reasonably quickly through the modem.  We have moderate speed DSL.

View 1 Replies View Related

Cisco Wireless :: 5508 Controllers - After Upgrade Intel Wi-Fi Link Cards Fail

Nov 10, 2011

Just recently upgrade our 2 5508 controllers from to  Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points.  The thing these laptops all have in common is some variation of the Intel Wifi Link AGN cards.  I have about 200 other clients out there working just fine.
I've tried everything under the sun that I can think of.  Patches, drivers, the whole sh'bang. 
Is there a known issue with and these particular cards?

View 17 Replies View Related

Cisco Wireless :: 5508 / H-REAP LWAPs Losing VLAN Mapping When Fail To Secondary WLCs

May 2, 2011

I have three 5508 WLCs, running code supporting 100+ LWAPs in H-REAP mode. The LWAPs are servicing 2-3 WLANs each. Some are using central authentication and local switching, some are configured for central authentication and central switching. When the LWAPs fail from one WLC to another WLC, the LWAP's lose all of their VLAN mappings and pick up the VLAN of the management interface on the new WLC.

All WLANs are configured to use the management interface on the WLC and the VLAN mappings are configured per LWAP on the H-REAP properties  tab.  The WLAN ID numbers and all the WLAN settings are the same across all 3 WLC's. I have created AP groups on all 3 WLC's and the AP group config matches across the 3 WLCs.

I can get the LWAPs to keep their VLAN mapping by creating an interface on the WLC with the VLAN ID of the locally switched/remote site VLAN and then setting the interface for the WLAN to the new interface. However, then the WLAN doesn't work, because the centrally located WLC doesn't have the remote site VLAN. It also seems to keep the VLAN mapping if I create the locally switched/remote site VLAN interface on the WLC , and point the WLAN to the management interface. This shouldn't be a necessary step though... In H-REAP with local switching, the LWAPs aren't using the interface on the WLC.

I found a note in the 7.0 WLC config guide that explains why the VLANs are picking up the management interface VLAN, but that same note says the VLAN mappings can be changed per LWAP/WLAN!

From config guide: For hybrid-REAP access points, the interface mapping at the controller for WLANs that is configured for H-REAP Local Switching is inherited at the access point as the default VLAN tagging. This mapping can be easily changed per SSID, per hybrid-REAP access point

Using H-REAP and been able to get the LWAPs to keep the VLAN mapping when failing from one WLC to another?

View 9 Replies View Related

Did Not Receive IP Address

Feb 21, 2013

For the past 2 days I have been having a problem with my laptop taht, actually a bit old. I also have another pc, a desktop, with a d-link modem and wireless router (DIR-615). The problem is that I can't go on the internet with my laptop, because of a certrain error on the Intel PROSet Troubleshoot: "Did not receive IP addresss", in fact the IP address was written as, and when I open the internet browser I can't go on to any page. IO have tried everything, believe me, from switching off every thing, to reinstalling the router, but nothing seems to resolve the error.

View 12 Replies View Related

How To Receive A Call From Modem

Aug 3, 2011

i use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?

View 1 Replies View Related