Outlook 2007 worked fine with my old router and when our laptops are connected on other networks. But both home laptops take about a minute to go through the "receiving mail" process with GMAIL pop3 accounts when connecting through the new E4200. Everything is factory default, and I reinstalled Outlook. This problem does not occur with the roadrunner email accounts also set up in Outlook
View 7 RepliesI am reading my gmail through Outlook 2007, using imap. When my computer is connected to the router by cable, everything works fine. When I try to connect wireless to the same router, it wont work. I can send e-mails, but outlook will not download new mail og syncronize with the server.
View 1 Replies View RelatedWe have a ASA 5510 which was running 8.0.2, we recently upgraded it to 8.2.5 and since the upgrade remote users for exchange 2007 are not able to download any large email attachments(over or close to 1MB). This is only happening to Outlook anywhere users or OWA users who are connecting to the exchange server using https(443) externally. If the same users connects internally they do not face any issue. When i check the logs on ASA i am gettings lots of RESET-O and RESET-I entries. Looks like the connection between the client and the server gets reset.
View 14 Replies View RelatedIs there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 2 Replies View Relatedhow to get Outlook to connect to Gmail IMAP servers when the ports are blocked through a firewall. Opening the ports in the firewall is not an option?
View 1 Replies View Relatedinternet is working with the client except for gmail account using outlook 2010.
View 1 Replies View RelatedI have a problem with new E4200 WAN speed. I have 1Gb connection from my ISP, and my old Netgear router gives me about 350 Mbps WAN speed, but with new E4200 I only got 110 Mbps max download speed.Cisco live support tried suggested to change MTU from Auto to 1400 (and try different wlan channels, even that I don't use wlan). This MTU size change makes no difference with WAN speed. I have latest firmaware installed, router reseted several times, tried different cables etc. Also with same cable sets my old Netgear still gives about 3 times better WAN speed.WAN port (and all LAN ports) seems to negotiated at 1000 Mbps at both ONT (optical network terminal) and Linksys settings page, but unfortanately there is no way to change the setting from auto to manual at E4200 settings (and it is not possible to change any settings of ONT by user). I was thinking that if somehow it won't auto negotiate properly (even if the setting page says its ok) but maybe it actually negotiated 100 Mbps port to WAN.
View 9 Replies View RelatedMy transfer speed from HDD which connected to linksys e4200 reach max 2,3MB/s how it is possible to watch fullHD movie if its required minimum 5MB/s? Maybe I should make some adjustments? HDD-WD My Passport 750Gb Also connection speed max reach 144mb/s?? how to make 300mb/s ? wifi adapter is Intel advanced N + WiMax 6250 AGN last driver installed, also E4200 last firmware installed 1.0.0.2 all settings by default Max download speed 75Mb/s by utorrent but provider gives 100Mb/s By cable its ok, max speed 100Mb/s as giving provider
View 9 Replies View RelatedI have brand new Cisco E4200 and WD Passport 500Gb.When it connected to router wireless (802.11n 300Mbit/sec) file transfer speed is around terrible 3 MB/sec. Same hard drive directly connected to my Mac Book Pro Unibody produce 30MB/sec. However my internet connection thru the router fairly shows 12MB/sec.It sounds funny, but for me is 4 times faster to download file from the Web rather the from hard dive that I'm holding in my hand.
View 5 Replies View RelatedI installed the E4200. Internet works fine, and the internet connection is maximum performance. But if I copy a file between laptops, or to my mediaplayer (AC Ryan HD2), the connection is 3MB/s tops. I changed to the 5gHz and N settings, still no change.
View 6 Replies View RelatedE4200 2.4 channel extremely slow.
View 7 Replies View RelatedI recently bought the E4200 thinking it would be the latest and greatest, and I wouldnt' have to worry, but after just a simple test of transferring files between my Home Server, and my PC (Both connected over Gigabit ethernet using CAT6 cables, with only the E4200 inbetween).I use to get anywhere from 40 MegaBytes/second to 50MegaBytes/second on my D-Link 655.But now I am lucky to barely get 20 MegaBytes/second. Is there an issue with this router? or am I expecting too much from Linksys?
View 6 Replies View RelatedE4200 with an external hard drive WD My Book (1TB) connected to the router via USB.Desktop PC (Windows 7) connected to router via Ethernet cable.Laptop PC (Windows 7) connected to router via wireless connection.I wanted to create a central media (videos/pictures) file on the external hard drive connected to the router. However, the transfer rate is terribly slow. Interestingly, it is 50KB/second when copying from the Desktop (via Ethernet) and 1.6Mbps when copying from the Laptop via wireless.
View 9 Replies View RelatedI usually download and update on my Nas in my house. I conneting my nas to the e4200. My laptop get full wifi from my router, but the speed up and down is very slow. I setup the wireless everything is auto.
View 1 Replies View RelatedUsing 1.0.03.
I am seeing something pretty bizarre: when trying to copy files between two computers (both Windows 7 SP1 64bit), both physically plugged into the back of the E4200, I see extremely slow transfer speeds: 1.0-1.1 MB/sec. Both computers are fast (i7-2600K, both using SSDs) and both have gigabit ports (and the 4200's web UI shows both ports in question as operating in gigabit mode).
This is so slow as to be sort of funny. Each of these computers see speeds well in excess of that when transferring between the computer and outside internet sites...so it's kind of funny that two computers plugged into the same switch in the back of the 4200 see 1 MB/second.
All I want is functional Wi-Fi in my house like the rest of the world. Unfortunately, I cannot have that for whatever reason.
Now that I said that, Let's me get down to explaining my issue. I orginally owned a Linksys WRT350n. This router worked fine for years, untill one day I decided to do a speed test on my new Motrola Atrix. My Wired computer gets ~22000kbps down and 4000kbps up... My wireless speedtest on my Atrix yielded 2000kbps down and 4000kbps up. I assumed it was the phone, so i went and tried every other wireless device in my house. Everyone of them got the same result.. 2000kbps down.. 4000kbps up.
At this point I went into my router settings and tried every available channel, all of them yielded the same result of 2000kbps down and 4000kbps up.. At this point, I assumed it was the router. Ive had it for a few years and figured it was just reaching EOL. I rushed to my nearest bestbuy to pick up a brand new Linksys E4200. I brought it home, hooked it up and was eager to test my new wireless speeds. Unfortunately the same results of 2000kbps down and 4000kbps up was the yield. Once again, I've tried every possible channel with no change to my speeds. At this point I called up Linksys/Cisco support.. They were POSITIVE it was a hardware issue and had me exchange the router, even though I informed them i had the same issue with my older router of a different model. I went along with it anyway, and exchanged my router. Same issue. I called Cisco/Linksys back up and informed them, and basically they told me "they'd make a note of the issue and call me back at a later date."
I downloaded a WiFi Analyzer on my cell phone. Theres only two other dectable networks in my area, and they are low low low signal. So, I don't believe it's heavy saturation. The router is in the same room as 3 of the wireless devices that get 2000kbps down/4000kbps up. So it's not range either.
Recently purchased a Linksys E4200.Computers on network:Two hard-wired gigabit desktops: one Windows XP, one Windows 7One hard-wired 100mbps desktop running Windows 7One laptop with an Intel 4965AGN running Windows 7.File transfer rates between any of the desktops and the laptop is very slow: ~2 megabytes/s
File transfer rates between the gigabit desktops is good (~50 megabytes/s, hdd bottleneck), transfers between the 100mbps desktop and one of the gigabit machines gives ~10 megabytes/s.Currently running on the 5Ghz band, connected with N at 300 megabits, good signal strength. Disabled mixed mode on this band, enabled N-only.Use a scanner tool, I can tell that there are no other networks on 5Ghz band.Also, tried 2.4 Ghz band and got similiar low speeds.These transfer rates are much below what other people report for real-world throughput. Any ideas? I know there is an Advanced Wireless config page, is there a setting there that might work if adjusted?
i have a newly formatted (i.e. empty) 2TB WD my book elite which when i connect it to my computers usb port, can transfer a 6gb video file at over 100MB/s according to the win 7 detail box. However, when i connect it to the usb port on the back of the e4200 and try to transfer the same file, it only goes at 8MB/s max ... it appears to be going at usb 1 speed. i've got the latest firmware on both the e4200 and the my book 1111 and everything seems to be working fine for both, except this transfer rate when connected to the e4200.granted, cisco doesn't specifically list this drive as being tested, but the router does recognize it and shows it as usb 2.0, but yet the transfer speed is just too slow.8MB/s is just not workable...i could just connect the drive directly to the computer and share it that way, but connecting it to the e4200 was one of the reasons i bought the e4200.
View 8 Replies View RelatedI have cable @ 15Mbps down, 2Mbps up. The cable line comes into the crawl space in my daylight basement. I have 3 Cat-5 cables running through the house. 1 to the TV downstairs, and then 1 each to 2 bedrooms on the second floor (one of which is my home office). In the home office, this Cat-5 is connected to a 24-port switch. I plug my printer, NAS, computers, etc into this switch.I have a WRT54G2 v1 that I was using as my Router/AP.I have a 1st & 3rd generation iPad. The iPad 3 plays YouTube videos in HD. About 6 weeks ago I started to get slow YouTube video playback on my iPad's. They would play a few seconds, then pause to buffer, etc. It used to be that videos started playing almost immediately and would never buffer.
Using Wifi Analyzer for Android, I noticed my neighborhood is saturated with 2.4Ghz wifi. So, I figured it must be that the 2.4Ghz band is saturdated and if I moved to a 5Ghz band, the YouTube buffering would be fixed.So, I purchased an E4200 (v1 I think) from Amazon. I bought this Router/AP because it supported the 5Ghz band. It also I connected it to my cable modem and setup everything. Still slow YouTube, and now YouTube videos are slow on my laptop (connected via ethernet). I still get ~15Mbps over ethernet or wifi using the speed test page provided by my ISP, but YouTube videos are VERY slow.
Just upgraded my E4200 to firmware 1.0.03 (from 1.0.01). I have some new issues, questions, and some outstanding issues.
1) Web interface over https is now painfully slow.
2) Does DDNS work in bridge mode? DynDNS allows the sending of an update without an IP address, so it should be able to work.
3) Does accessing the management interface in bridge mode count as local or remote?
4) I'd really like to be able to get WOL working through the router. I managed to create a static DHCP reservation for 192.168.1.254 to ff:ff:ff:ff:ff:ff, but I don't think the router added that entry to the ARP table, is there any way to do this.
(I think have WOL forwarded to 192.168.1.254). 5) Should the router be providing some local dns hostnames? For example I have the device name set up in the local network setup, but it won't resolve. Similar for connected devices, especially those with with a DHCP reservation. 6) In bridge mode, does it matter which port is used to connect to the other network device? Does it have to be the WAN port?
Im trying to optimize my E4200 settings and Ive noted that ping and download speeds are extremely slow for the internet service I signed up for. Ping speeds are consistently more than 1000ms and dowload speeds typically are less than 3Mbps. These are for both wireless and wired connections to the E4200 router.
When I disconnect the router and hardwire my laptop directly to the the modem, ping speeds are less than 100ms and download speeds are 20Mbps.
Simply put, webpage loading is at a snails pace with wireless and wired connection the router, but blazing fast when hardwired directly to the modem.
On a seperate issue, the iMac I have is also **bleep** slow even when hardwired directly to the modem. Is there an obvious router setting Im screwing up? Router is updated with the latest software.
I have the E4200 with latest firmware . When I connect my computer to the E4200 and that to my modem im getting about 50mb speed. If I disconnect the E4200 and connect my computer straight to the modem I get about 95mb speed?I have the Virgin Broadband 100mb service and all is working fine at their end.
View 2 Replies View RelatedI saw one post recommending to changing the MTU from 1500 to 1400. That did absolutely nothing. My comcast internet is now slower than 14.4 dial up modem I had 16 years ago. The strange thing is I can sometimes download at over 2 mbps with torrents. It's mainly loading websites where the speed is so bad.
View 9 Replies View RelatedI have recently purchased a Cisco E4200 to replace my D-LINK DIR-655, which I thought was defective because I was getting slow wirless file transfer speed, regardless of setting, location and client.Using the E4200, when I transfer a file from a PC to another, both connected at 300mb on the 2.4ghz band, the file transfer rate reported by windows 7 and networx is from 2MB/s to 3.5MB/s. I think those transfer rates are not acceptable. Is that a good assumption ? I would expect something in the range of 10MB/s (which is what I get with a cheap dlink router, wired)
I also had great difficulty finding a channel. I had to try them all one-by-one as the auto channel selection made my PCs connect at 130mb.The E4200 is setup as follows:
-WPA-Personal
-Channel 5
-802.11n only
I have tried 3 different computers with different network adapters and they all underperform (IMO..).There are no other wireless networks in my area.I also took the E4200 to my office which is very crowed. Every single channel is occupied by several wireless networks. I get a file transfer speed PC to PC of about 2MB.I basically could have kept my DIR-655 as the speeds are identical.
Can you suggest me how to block facebook,gmail,yahoo in cisco wireless router Model No;-WRT610N version 2
View 4 Replies View RelatedI get about only 500 KB/s for accessing files (as a network drive), regardless of the size of the file (even full 4GB iso)If I watch a video via media server however I get around 3MB/s.My firmware is currently on 1.00 and I am not upgrading due to the notorious media server problem.
View 5 Replies View RelatedSo I have installed my new E4200 version 1 and I am disappointed with the speeds. My computer has a wireless N card and gigabit Ethernet compatibility. I am currently getting a miserly 54 mbs wireless and 100 mbs on the wire (connected with cat6 all the way)... Anything I should try to get close to advertized speeds?
View 9 Replies View RelatedI recently installed an E4200 router/AP and, on one desktop, an AE2500 USB Adapter. All the other devices on the LAN work fine and the laptops, even show improved tranfer rates. The desktop, with the AE2500, shows good or very good signal strength, but the speed is down around 5.5 Mbps. Running a full backup of the HDD proves the slow speed.
View 7 Replies View Relatedmy router cant receive any internet from my modem. my internet ip when it is connected is 0.0.0.0 . when my modem is directly connected to the computer, it works fine, i can access the internet, but when it's connected on the router, this problem occur. iv'e tried the solution on the e300(something , i have forgot ) but it didnt work for me. my ISP is DSL btw. i have brought my router on the shop and it works fine. i even brought my CPU at the shop and used my router there and it works also just fine. Their ISP is also DSL . So base from these i've concluded that the problem is my modem?
View 8 Replies View RelatedI'm having trouble connecting using this new card i bought. i have installed the latest drivers and i can find networks and the signal strength is good too but when trying to connect after ive entered the passkey i get the message " no network found" or "did not receive response from router" or something along those lines. i can connect with my older card which is a wmp54g but that one shows less signal strength and my connection breaks from time to time (hence the upgrade to wmp600n) on a sidenote, my wmp600n card works perfectly fine under linux but i want it to run in windows (mainly for gaming) Im running windows vista 64 bit and the wmp600n has the latest drivers installed.
View 3 Replies View RelatedI need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies View RelatedMy phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies View Relatedmy up and down button doesn't work in gmail
View 1 Replies View Related