i receive my router signals at my laptop but no internet access. i am receiving this problem from last 2,3 days. Before this it was working fine. I have reset the router settings many time but no results. i get the signals at my laptop but i cant access the internet . some times i got DNS server error.
View 1 Replies
I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
View 1 Replies View RelatedI've had my computer for maybe a year now, and I have not had problems with my wireless before. Two nights ago I found that I lost internet, and when I tried to reconnect there were no connections available.
My wireless IS on, and my mother's IPad uses the same router as my laptop does for internet and she gets internet with no problem, so it's not the router. I've tried rebooting the computer, disabling and reinabling the wireless, shutting down the computer for the night and trying in the morning, and none of these things worked.
i have a packard bell network.i formatted the whole laptop.and now my laptop doesnot show any wireless network,however connects to dial up connection.i am using windows 7 ultimate 32 bit os
View 1 Replies View RelatedIs it possible to use a wireless router to pick up internet signals using a cricket broadband connection
View 1 Replies View RelatedI have a Wrt160n router and a Motorola sb120 modem (provided by comcast after my original modem got fried by lightning, no I didn't have my router hooked up when that happened), I have been having trouble trying to get the modem to send the internet signal to my router. I have tried mac address clone that was suggested on this forum for someone with a different router but still no internet to my computer, its all hooked up through Ethernet cables, the computer I have it hooked up with a hard line is running windows seven. When I plug the modem straight to the computer it works and I have internet but when I hook up the router between them it has no internet.
View 9 Replies View RelatedMy Gateway laptop has stopped sensing wireless signal. It was working just fine a few hours ago, then after I pulled it out of hibernate it stopped sensing the signal. I have switched the button off and on at least 3 times, tried restarting and turning off and starting. Have also tried the Fn-F2 a number of times but still no luck.
View 3 Replies View Relatedmy router cant receive any internet from my modem. my internet ip when it is connected is 0.0.0.0 . when my modem is directly connected to the computer, it works fine, i can access the internet, but when it's connected on the router, this problem occur. iv'e tried the solution on the e300(something , i have forgot ) but it didnt work for me. my ISP is DSL btw. i have brought my router on the shop and it works fine. i even brought my CPU at the shop and used my router there and it works also just fine. Their ISP is also DSL . So base from these i've concluded that the problem is my modem?
View 8 Replies View RelatedI have a HP laptop and unable to access the internet using a router. What should I do? I can use the lab top hooking it to the cable.
View 1 Replies View RelatedI have a WLC 4404. I added a new AP to the network and it is associated with the WLC now. But still its not braodcasting the ssids. I compared the configuration with the ones installed before and configuration is same.
View 9 Replies View RelatedAfter a couple of hours using the internet, the connection stopped. The wireless router still had an 'Excellent' signal, but it also said I had no internet access. All of the other wireless devices in my house connect to the internet perfectly, including when right next to the laptop.I've tried disabling the firewall and resetting the computer a few times, but nothing seems to pick up the internet access. The troubleshooting guide tells me that it is a problem with the wireless modem, but quite obviously that isn't true.
View 4 Replies View RelatedI'm looking at a dual-channel wireless-N router that transmitts at 2.4Ghz and 5Ghz, but none of our newer laptops even recognize the 5Ghz channel. Is there a configuration setting to change what frequency laptops can recognize? Looking to put 2 newer modle Toshiba loptops on the 5Ghz channel and leave two other...older systems on the 2.4Ghz channel.
View 5 Replies View RelatedMy Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
Just recently got a Zyxel VSG1432 router connected to the main computer in my home. I am now trying to connect my laptop wirelessly. It will connect to the router but says it is an unidentified network and it doesn't connect to the internet. There is an x in the network and sharing window.I have tried restarting the router, going to the router webpage and resetting to factory settings, none of this worked. Also contacted the service provider and spoke with two tech guys, but still no luck.
View 1 Replies View RelatedLinksys E1000 running on Window XP
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?
I am experiencing connectivity issues with the wireless part for several weeks. The laptop connects to it, but it shows me that it does not have internet access.I also have a belkin router that I also use. So, when I have the connectivity issues, I connect to the other router. When I use the Cisco Connect application, it goes on for a couple of minutes and then gives the message "If you are not connected to my router SSID name you can't update your router settings".
View 1 Replies View RelatedA bunch of stuff from my laptop was restarted and uninstalled. Now my laptop doesn't even pick up a signal
View 1 Replies View RelatedCan I connect my laptop to more than 1 wifi signals.
View 2 Replies View RelatedMy laptop will work on a wired connction just fine, however it fails to pick up wireless internet signals. It will either not find the signal, or not connect to it unless I have my laptop wired with an ethernet cable. My network adapter is a Broadcom 802.11n. I have tried updating the driver, and multiple different routers/connections.(Yes the adapter is enabled to search for connections, it just doesnt find them unless I have it wired)
View 1 Replies View RelatedI have an Aspire 7520 laptop and want to use it wirelessly on my router, it will not connect or even pick up the signal. I have no problems when i connect via the patch lead. i have uninstalled and reinstalled the wireless driver and i have checked to make sure i have an upto date driver as well. I run off vista, whats confusing me (doesn't take much) is that it was ok when i had my bt router but then changed to sky and it hasn't worked since.
View 5 Replies View Relatedcan't access internet,searchqu.com/431 this message comes up and i can't get rid of it!
View 1 Replies View RelatedSo i have a dell latitude e6400 laptop running windows XP. Now whenever I connect to my home wireless network, it will connect fine but randomly it will stop sending or receiving data. Therefore i cannot connect to any websites and i get a connection error. I check my connection though and it is running through an excellent connection.
View 5 Replies View Relatedi have mini dell laptop connect to internet using wireless. My laptop got connected and has strong signal but status said limited or no connection and I can not connect to internet.
View 2 Replies View RelatedI have a WAP4410N that only allows my laptop local access, no Internet. Here is the scoop:
- Other users connect to the WAP and get Internet access
- Laptop connects to many other networks and has Internet access
- Laptop is running Vista
- ipconfig /all has address, mask, gateway, DNS, and looks normal
- Adapter is Atheros AR5007 802.11b/g with latest drivers
Recently I bought a new netgear router. It has two separate wireless signals. One is the main wireless connection for my computers. The other is a slower backup network for smartphones, apple tv, and guests. All of the other devices in the house can find both signals, but my main PC is only finding the backup network. It works fine for general browsing, but is very slow for downloads and unusable for gaming
View 9 Replies View Relatedwhat can make a router stop transmitting wireless signals and wlan no longer working
View 1 Replies View RelatedIt seems since I have moved into my new house months ago my E3000 keeps on dropping its signal. I have an older roouter that doesn't do this. Currently I have a PS3/Xbox 360 plugged in and then the 3 laptops that use the wireless.
View 1 Replies View RelatedE2000-RM router has been working fine until about 2 days ago. Wired connection still works fine, but the wireless signals seems to be dropping in and out. I have a couple wireless devices and they all seem to be experiencing problems. Using the network connection bar on my laptop sometimes it shows a strong signal and connects no problem. Then all of a sudden the signal is gone (drops off list). It can be both the main and guest signal dropping, other times it might just be the main, etc., etc. Sometimes it shows a signal but will not connect and then a few seconds it might connect, or drop entirely. I guess the best word to describe it is highly erratic. Distance does not seem to matter. I can be 2 feet away and get the same behavior. The indicator on the box shows a signal at all times.
View 8 Replies View RelatedSo I just got this router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
My room Desktop Wifi:
Download was 0.50 mbs Upload: 3.6
My laptop right next to Router:
Download 19.87 mbs Upload: 3.5
My room Desktop Neighbors Wifi:
Download was 17.3 mbs Upload was 3.32.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
I have a friend internet wireless signal that is being hijacked by anothe individual and we know who it is, but can't get him to get his own internet, is there anything we can do to block the internet siganl that will only interfer with the indivual that is hijacking the internet and not interfer with the individual that has internet legally?
View 4 Replies View RelatedI have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies View RelatedI am having no end of issues with this router since the upgrade to CCC. I don't want to downgrade because the reason I purchased the router was for the hopeful addition of more apps later on and the CCC.
My router has now suddenly decided to no longer broadcast N signals. My 2.4ghz network is set for mixed and my 5ghz is set for N Only. They are both set to auto channel and WPA2 Personal security and have been working since I purchased the router on Sunday.
Last night it spontaneously rebooted and that was that.
Both laptops (with N adapters) are seeing the 2.4ghz network as 802.11g and my 300Mbps notebook adapter is seeing the 5ghz network as 802.11a. InSSIDer is showing that both networks are now broadcasting at a max of 54Mbps.
I have tried rebooting the router multiple times. I have also tried unplugging it for 60 seconds. I have also attempted to force the 2.4ghz to 20Mhz and a more optimal (unused) channel. That doesn't work. I tried setting the 5ghz network to wide (40mhz) with an optimal channel. Same deal. Still seeing it as 802.11a.
I have a cisco router model number E2000 it has worked fine until a few days ago, it keeps losing its signal on all my wireless devices I have reset it and it still is not working properly. I am wondering if I have to many wireless devices running through this router.
View 1 Replies View Related
