Linksys Wireless Adapters :: Set Transmit / Receive Buffers To For WMP600N
Jul 12, 2011maximum size I can set the Transmit/Recieve Buffers to for the WMP600N wireless adapter.
View 4 Replies
ADVERTISEMENT
LAN Connect / Can Receive But Not Transmit
Jan 10, 2011I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.
View 4 Replies View RelatedLinksys Wireless Adapters :: Wmp600n Did Not Receive Response From Router
Jan 27, 2011I'm having trouble connecting using this new card i bought. i have installed the latest drivers and i can find networks and the signal strength is good too but when trying to connect after ive entered the passkey i get the message " no network found" or "did not receive response from router" or something along those lines. i can connect with my older card which is a wmp54g but that one shows less signal strength and my connection breaks from time to time (hence the upgrade to wmp600n) on a sidenote, my wmp600n card works perfectly fine under linux but i want it to run in windows (mainly for gaming) Im running windows vista 64 bit and the wmp600n has the latest drivers installed.
View 3 Replies View RelatedLinksys Wireless Router :: E100 Can't Receive Any Internet From Modem
Mar 28, 2012my router cant receive any internet from my modem. my internet ip when it is connected is 0.0.0.0 . when my modem is directly connected to the computer, it works fine, i can access the internet, but when it's connected on the router, this problem occur. iv'e tried the solution on the e300(something , i have forgot ) but it didnt work for me. my ISP is DSL btw. i have brought my router on the shop and it works fine. i even brought my CPU at the shop and used my router there and it works also just fine. Their ISP is also DSL . So base from these i've concluded that the problem is my modem?
View 8 Replies View RelatedLinksys Wireless Router :: Can WES610N Receive Signal From Verizon 4G Jetpack?
Sep 15, 2012I need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies View RelatedLinksys Wireless Router :: Outlook 2007 Very Slow To Receive Gmail On E4200
Jul 16, 2012Outlook 2007 worked fine with my old router and when our laptops are connected on other networks. But both home laptops take about a minute to go through the "receiving mail" process with GMAIL pop3 accounts when connecting through the new E4200. Everything is factory default, and I reinstalled Outlook. This problem does not occur with the roadrunner email accounts also set up in Outlook
View 7 Replies View RelatedLinksys Wireless Router :: EA3500 Phones Connect To Wi-Fi But Cannot Sens / Receive Data
Feb 3, 2013My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies View RelatedBroadband :: Where Are Ethernet Buffers
Jul 26, 2011I seek info concerning the location of the In and out (Trasnmit and Recieve) Buffers of a/the Ethernet Adaptor(s).I expect it could negotiated with the current OS.
View 1 Replies View RelatedVideos Buffers At School But Not At Home
Sep 6, 2012i have my laptop which i use at school okay and when i try and watch youtube videos at school it works fine but as soon as i try and watch them at home it just buffers and buffers and never loads, its definitely not the internet connection as my dad/mum/brother/ps3 can all watch youtube videos, and i dont know why this is happening.
View 6 Replies View RelatedTransmit A Wireless Signal From PC?
Oct 3, 2012I recently bought a Nintendo 3DS but unfortunately my University's wireless security (WPA2 Enterprise) is incompatible with the system. As such, I was looking for a way to transmit a wireless signal from my computer, and place an alternative form of security onto it (such as WEP), so that the 3DS can connect to it.
At the moment, my desktop is connected via ethernet cable, which plugs directly into a wall socket. I'm pretty unsure as to what to use, I've heard of things such as 'wireless bridges', but I'm not sure how they work. Also, I'm looking for the device to transmit a signal even if my desktop isn't turned on. Is a router my only option?
How To Transmit A Wireless Signal From PC
Dec 10, 2012i have ipod but i dont have wireless modem i need software thats work from my pc as wireless modem
View 2 Replies View RelatedCisco WAN :: Minimize The Buffers On Catalyst WS-C3550-12T
Feb 8, 2012Howto minimize the buffers on Catalyst WS-C3550-12T to absorb 50ms to 100ms of PCoIP traffic according to:
[URL]
How To Transmit Video Over Wireless Network
Mar 24, 2011I need to transfer live video and if possible video from station A to station B over wireless network. So what are the hardware requirements and setup cost...
Secondly how should i connect my CCTv cameras atleast 5 to computer's webcam so that i can transfer video over internet.
Wireless Transmit To Speakers From Stereo Amplifier?
Sep 18, 2012How do I - from my stereo amplifier wireless transmit to two stereo speakers?
View 1 Replies View RelatedCisco Switching/Routing :: 6509E - Four Port 10G Blade Buffers 16M
Dec 29, 2011Looking at the specs for WS-X6704-10GE, it shows the port buffers at 16M per port. This doesn't seem like very much for a 10G port. Is this upgradable or related to how much RAM is in the blade?
View 4 Replies View RelatedTP-Link TL-WR841ND Wireless N Router - How To Transmit Internet
Apr 29, 2011I need a wireless router to transmit internet in my home, it's on two floors, my only concern is that the floor is really thick and I'm gonna be working in the basement. I need to choose between the following, can you tell me which is best?
View 1 Replies View RelatedCisco Wireless :: 1262 Maximum Transmit Power
Jun 10, 2012I will be doing a site survey using the client's Cisco 1262 with only 1 radio (g/n), 3 antennas. What is the maximum transmit power, 20dBm or 23dBm? I need to set the transmit power in the Airmagnet to 50% or 3dBm down as recommended by Cisco.
View 4 Replies View RelatedCisco WAN :: 2960 Buffers (drops / Packet Loss Due To Micro-bursts)?
Dec 21, 2011Have a pair of 2960's in a stack, one port(trunk) connects to another DC and we are seeing ~5% packet-loss and large output drops to this DC.
#sh interfaces gigabitEthernet 1/0/17 counters errors
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi1/0/17 0 0 0 0 0 182867
GigabitEthernet1/0/17 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is a0cf.5b87.ec11 (bia a0cf.5b87.ec11)
Description: QinQ_to_DC2
[code]....
As you can see, 30sec rate isnt excessive, but as the drops are outdiscards it would appear we are getting hit by the small buffers/microburst issue.
Gi1/0/17 is mapped to asic 0/20
Gi1/0/17 17 17 17 0/20 1 17 17 local Yes Yes
D-Link DIR-615 :: Router Won't Transmit Wireless When Local Wired Connection Is In Use
Aug 9, 2012the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies View RelatedCisco Switching/Routing :: Nexus 3064 - Deep Buffers In 10G Ethernet Switches
Mar 3, 2013I have a lot microbursts in my network and i looking 10G switches with big buffers. Which models have biggest buffers ? I think about 1-2U (nax 4U) switch with up to 60-100 10G ports. Something like nexus 3064 (he has only 9MB shared buffers AFAIK). Besides deep buffers i need also:
- trill or another ethernet ring topology like erps,eapsv2,
- Multi chassis LAG,
- virtual routers, policy routing
- dcb
- 40G interfaces will be plus
Cisco Wireless :: AP1242 Excessive Transmit Discards And Performance Complaints
Apr 15, 2013I have an AP1242 near a couple of conference rooms. I get complaints when we have a large contingent in there and some try to download documents. The bandwidth consumption is meage - less than 2Mbps. But there could be say 50 people in those training rooms. I see no errors at the FE interface on the AP but I do see a good number of Transmit Discards.
Are 50 users connected to an AP1242 simply more than should be expected of the device? 802.11g is the radio.
Are transmit discards indicative of some kind of configuration problem? The users in these cases are generally very close to the access point - within a few feet even.
If it is indicative of a configuration problem would that be an issue of the configuration of the laptop wifi cards or a problem at the AP?
Linksys Wireless Adapters :: Windows 7 / 64 Will Not See WMP54G?
Dec 24, 2011making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies View RelatedLinksys Wireless Adapters :: Cannot Get AE1000-4T To Work
May 24, 2011When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies View RelatedLinksys Wireless Adapters :: How To Install WUSB54GSC
May 26, 2011How to install model WUSB54GSC.
View 5 Replies View RelatedLinksys Wireless Adapters :: Trying To Work With WPC54G
Jan 17, 2012I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies View RelatedLinksys Wireless Adapters :: AE1000 Won't Allow Standby
Jan 21, 2011I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
Linksys Wireless Adapters :: Can't Install WMP54G?
Jul 5, 2011I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies View RelatedLinksys Wireless Adapters :: Wusb300n Setup Without CD
Sep 25, 2011I'm at a new apt and I can't get Online with vista to download the driver so I've been trying to download it on a droid or iPhone and transfer the file any know any way to do this besides finding a cd? Can I make a cd at a friends house by downloading the driver online? Where can I get the driver?
View 1 Replies View RelatedLinksys Wireless Adapters :: AE3000 Will Not Connect?
Sep 9, 2012I picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies View RelatedLinksys Wireless Adapters :: Lost CD For Wusb54gc Ver 3?
Mar 8, 2011i tried down loading drivers but computer still says needs cd.
View 4 Replies View RelatedLinksys Wireless Adapters :: AE1200 Keeps Disconnecting
Oct 9, 2011Like I said my AE1200 adapter keeps disconnecting, it happens about twice a day, underload especially.I already tried to update drivers, reinstall drivers, tweak settings, nothing works, I even turned off power save mode.I'm running WIndows 7 64-bit
View 4 Replies View RelatedLinksys Wireless Adapters :: Use AE1000 On Panasonic TV?
Jul 30, 2011We're using our Sprint hot spot and want to make a wireless connection to the TV...can I use the AE1000 for this? If not, what do I need to use?
View 2 Replies View RelatedLinksys Wireless Adapters :: WMP600N Wake On LAN
Jan 16, 2012I'm having trouble trying to allow this device to wake the pc. Does WMP600N support this ? When i go into the power management section i have 'Allow the computer to turn off this device to save power' but the option for 'Allow this device to wake the computer' is greyed out ? I currently have driver version 3.0.2.0 installed.
View 5 Replies View Related
