Linksys Wireless Adapters :: Trying To Work With WPC54G
Jan 17, 2012
I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies
ADVERTISEMENT
Jan 15, 2009
Where can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
View 3 Replies
View Related
Dec 8, 2006
I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies
View Related
Mar 31, 2009
I have a WPC54G version 4 wireless-G notebook adapter. I cannot find anywhere even here the driver for this device? I read the forums and have been googling all morning and I found one topic that said that version 3 (Vista compatible) WPC54G_V31_driver_4.100.15.5_vista.exe..will work with ver 4. I have tried it and my adapter will still not see the files in the extracted folder. There's 5 files in the folder and when I do the hardware/update driver method it won't see the drivers. I have tried all the other version and none will load??
How can I get this driver to work with my Windows XP? I don't have the CD anymore.
View 6 Replies
View Related
Mar 3, 2013
I have a WPC54G ver. 2 adapter I am trying to get to work on a thinkpad T22 running W2kPRO with all the SPs and updates installed. The power light comes on, but the link light does not. I am using a Linksys WRT54GS wireless router. The monitor icon shows in the taskbar and when I open it, it says the adapter is inactive. I have tried several time to download and install the driver for the Linksys site. It seems to install OK, but when I go back and check the Drivers tab to verify that the driver version has changed to 3.20.21.0, it is still version 6.0.0.18.
View 4 Replies
View Related
Jan 29, 2011
I am trying to install a WPC54G adapter in a Compaq EVO N610C Laptop with Windows XP SP3 and it has a Texas Instrument PCI-1420 CardBus Controller. Adapter is inactive. I have uninstalled, reinstalled, download updated drivers from Linksys.
View 1 Replies
View Related
Jan 31, 2012
Have an old laptop running XPSP2 with a WPC54G V1.2 card that I use for email when traveling. Had no problems accessing my old home network that ran off of a WRT54G V 5.0 wireless router, nor with any of the "motel wireless networks" when I travel. I changed ISPs and now have an Actiontec PK5000 wireless router.
When I attempt to connect I get an error message "unable to acquire network address."
This new router has the following 64 bit and 128 bit settings
wpa-wpa2 personal
wpa personal
wpa2 personal
wep
security off
Using any of the security settings I get the error. Turning off security allows me to connect fine.
I realize this is a pretty old wireless card so is it possible it doesn't work with the current encryption standards but I would have thought that wep would have worked. The driver for the card is V3.3.15.0 which is also old. Would updating the driver work and if so what driver? If a new card is the only way any recommendations for an inexpensive card?
View 1 Replies
View Related
Dec 20, 2008
I've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies
View Related
Jan 2, 2012
I use a WPC54G wireless adaptor to connect a laptop to my home network. I just replaced a WRT54G2 router with a Cisco Valet router.When I start up the laptop, the wireless adaptor's Monitor configuration takes priority over Windows XP wireless configuration, but the Cisco Valet does not recognize the Monitor. If I disable the Monitor, everything is fine until I reboot, and then the Monitor again prevents connecting to the router.
How do I permanently disable the Monitor software so that the laptop will default to the Windows XP wireless configuration settings?
View 2 Replies
View Related
Dec 1, 2012
I have a ThinkPad running 2000PRO that I just installed a WPX54G Notebook Adapter. After installing and restarting the computer I get a window saying External exception E06D7363. Also, when I go into configure it says the adapter is inactive. When the computer first starts up the icon for the adapter is green then turns gray.
View 9 Replies
View Related
Aug 14, 2010
I have the WPC54G , used on Sony Vaio, Windows XP Home Edition Version 2002 and use a Novatel Wireless MiFi 2200 Mobile Hotspot. Recently had system crash--reinstalled through recovery discs and all current Windows Update (SP3), as well as the WPC54G The WPC54G worked with various WiFi Networks and the MiFi2200 Device before crash. After "recovery", it recognize WiFi Networks, however; it does not recognize my network established through the Novatel Wireless MiFi 2200 Device. (Note: the MiFi Device is working because other computer/devices are gaining access to internet.
View 7 Replies
View Related
Jul 12, 2011
I have a Packard Bell Laptop using Windows XP OS and doesn't have Wireless Connection. So long ago i bought a Linksys by Cisco Wireless-G Notebook Adapter WPC54G v.1.2 but didn't have time to set it up or use it for travelling conditions. A couple years later when i came back to check on the laptop, i noticed that i lost the setup CD. So i went on the Linksys website and looked for the driver the download. On the back of the Adapter(card) it says it is version 1.2. But this version is unavailable on the Linksys Website. I could only find v.1, 2,3,3.1 and 7. v.1 gives a driver of v3.1 etc... AND NOT VICE-VERSA.So first when i inserted the card into the slot , the PC didnt detect it. It only detected it rarely if i insert another driver (eg: USB..). And so a window would pop up to install but i didnt know what to do there. When i downloaded the v.1 driver from the website and installed it, it seemed not the detect the card either, it would just say searching for wireless, but that's it. It would keep searching for hours even when im next to the router.finally, only the Power led light on the card is lit up but not the "Link" led.
View 1 Replies
View Related
May 24, 2011
When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies
View Related
Oct 12, 2011
I've recently bought an AE2500 wireless adapter, and I've had problems setting it up, I've checked my port drivers versions and they're all up to date, I have looked over countless websites figuring out why it is doing this, my computer is a Windows Vista, and my last resort is formatting the computer, I've been here for countless hours trying to get this to work, when I run the disk with the adapter, it gets stuck at "Detecting Adapter" and ends up coming up with "Cannot find wireless adapter" or something really close to that. I've tried switching it to all of my USB ports, and nothing is working!
View 5 Replies
View Related
Nov 8, 2012
I have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies
View Related
May 18, 2011
I have a wireless adapter WMP54G for a long time, but recently i updated to windows 7 and the problems begun.
After read a lot of stuffs about this problem, i downloaded a driver by RALINK and installed de adpter. But......on the installation, show two hardware: one is the adapter Linksys WMP54G...and the other can't be installed. So..on the Device manager appear like "unknown device" on the three of "USB controllers"
So...i'm already try a lot of things and can't install this adapter
View 4 Replies
View Related
Jan 29, 2013
The latest driver is version 3.2.7 for Windows 7. I am still on the 3.0.2.0 driver which works fine for me. I just wanted to note that the 3.2.7 driver obtained from Windows Update doesn't work well, drops connections and takes longer to establish a connection. I've tried to update twice and each time I go back to the older driver.Can someone at Linksys examine the performance of this driver?
View 9 Replies
View Related
Mar 26, 2010
I have installed manually drivers for wusb54gc v3, but the wireless manager still write error 211. I do see the adapter in device manager and it's writen than it's working, bat still the manager doesn't work and ican't see any net. OS Win7 32bit.
View 9 Replies
View Related
Mar 12, 2011
Recently purchased refurb AE1000, it failed to work in Win7(AsusSabertooth I7 system) showing up but never enabling regardless of what I tried. I tested it in an old notebook I have under XP and worked flawlessly. So, I then tested it in XP mode on the I7 and it worked as well. I've used the latest Cisco drivers but no luck under Windows 7. It obviously isn't the hardware?
View 2 Replies
View Related
Mar 18, 2013
I have a Linksys Wireless G PCI adapter. The model is WMP54gs and the serial number MGP00E416793. I am trying to install this adapter on a Windows XP media center computer. The computer is update to date with all windows updates. I need the driver and software to successfully get this adapter to fully work.
View 3 Replies
View Related
Feb 28, 2011
I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.
View 2 Replies
View Related
Apr 10, 2012
have a Dell laptop running Windows 98 on it and I'm trying to get a Linksys WPC54G ver. 4 PCMCIA adapter working on it. I finally got the adapter installed along with its device drivers and other required software such as IE6 and I have it connected to the router in my house. The only problem is, the card shows a connection between the card and the router but a broken connection between the router and the internet. I can't seem to figure out how to fix this considering all of the other wireless devices in our home (iPods, laptops, phone, tablets etc) connect to it which makes me think I have to designate (I'm no good at networking) an IP address or DNS like you would be able to on WinXP, Vista, or 7.I had a friend come over and he was looking through the admin settings on the router and said that it only supports WEP encryption, not WPA. The router is the standard router that Verizon gave us when they came in to install FIOS. The card says it supports WEP and WPA (Radius and PSK whatever that means) and I have it set to WEP and entered the password but I can't seem to get it connected to the internet. Would it work if I bought a new router or is there some kind of thing I need to punch into the Internet Protocol properties like you would on later OS'?
View 2 Replies
View Related
Dec 26, 2012
Will a Belkin N450 DB F9K1105 v1 work with Linksys PoE PLEK400 adapters?
View 1 Replies
View Related
Sep 2, 2004
I have a network in my home using Mac computers (2). I needed to buy a PC for internet schooling. I bought a Dell Latitude and a Linksys WPC54G notebook adapter. I set up the notebook adapter, get a connection with good signal strength but cannot access the internet. I am using Windows XP Pro and have called Linksys with no dice. I don't have a network bridge and don't appear to have a firewall.
View 27 Replies
View Related
Sep 6, 2011
Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
May 26, 2011
How to install model WUSB54GSC.
View 5 Replies
View Related
Jan 21, 2011
I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
View 1 Replies
View Related
Jul 5, 2011
I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies
View Related
Sep 25, 2011
I'm at a new apt and I can't get Online with vista to download the driver so I've been trying to download it on a droid or iPhone and transfer the file any know any way to do this besides finding a cd? Can I make a cd at a friends house by downloading the driver online? Where can I get the driver?
View 1 Replies
View Related
Sep 9, 2012
I picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies
View Related
Mar 8, 2011
i tried down loading drivers but computer still says needs cd.
View 4 Replies
View Related
Oct 9, 2011
Like I said my AE1200 adapter keeps disconnecting, it happens about twice a day, underload especially.I already tried to update drivers, reinstall drivers, tweak settings, nothing works, I even turned off power save mode.I'm running WIndows 7 64-bit
View 4 Replies
View Related
