Linksys Wireless Adapters :: WPC54G How To Permanently Disable Monitor Software
Jan 2, 2012
I use a WPC54G wireless adaptor to connect a laptop to my home network. I just replaced a WRT54G2 router with a Cisco Valet router.When I start up the laptop, the wireless adaptor's Monitor configuration takes priority over Windows XP wireless configuration, but the Cisco Valet does not recognize the Monitor. If I disable the Monitor, everything is fine until I reboot, and then the Monitor again prevents connecting to the router.
How do I permanently disable the Monitor software so that the laptop will default to the Windows XP wireless configuration settings?
View 2 Replies
ADVERTISEMENT
Jan 17, 2012
I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies
View Related
Jan 15, 2009
Where can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
View 3 Replies
View Related
Dec 8, 2006
I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies
View Related
Mar 31, 2009
I have a WPC54G version 4 wireless-G notebook adapter. I cannot find anywhere even here the driver for this device? I read the forums and have been googling all morning and I found one topic that said that version 3 (Vista compatible) WPC54G_V31_driver_4.100.15.5_vista.exe..will work with ver 4. I have tried it and my adapter will still not see the files in the extracted folder. There's 5 files in the folder and when I do the hardware/update driver method it won't see the drivers. I have tried all the other version and none will load??
How can I get this driver to work with my Windows XP? I don't have the CD anymore.
View 6 Replies
View Related
Mar 3, 2013
I have a WPC54G ver. 2 adapter I am trying to get to work on a thinkpad T22 running W2kPRO with all the SPs and updates installed. The power light comes on, but the link light does not. I am using a Linksys WRT54GS wireless router. The monitor icon shows in the taskbar and when I open it, it says the adapter is inactive. I have tried several time to download and install the driver for the Linksys site. It seems to install OK, but when I go back and check the Drivers tab to verify that the driver version has changed to 3.20.21.0, it is still version 6.0.0.18.
View 4 Replies
View Related
Jan 29, 2011
I am trying to install a WPC54G adapter in a Compaq EVO N610C Laptop with Windows XP SP3 and it has a Texas Instrument PCI-1420 CardBus Controller. Adapter is inactive. I have uninstalled, reinstalled, download updated drivers from Linksys.
View 1 Replies
View Related
Jan 31, 2012
Have an old laptop running XPSP2 with a WPC54G V1.2 card that I use for email when traveling. Had no problems accessing my old home network that ran off of a WRT54G V 5.0 wireless router, nor with any of the "motel wireless networks" when I travel. I changed ISPs and now have an Actiontec PK5000 wireless router.
When I attempt to connect I get an error message "unable to acquire network address."
This new router has the following 64 bit and 128 bit settings
wpa-wpa2 personal
wpa personal
wpa2 personal
wep
security off
Using any of the security settings I get the error. Turning off security allows me to connect fine.
I realize this is a pretty old wireless card so is it possible it doesn't work with the current encryption standards but I would have thought that wep would have worked. The driver for the card is V3.3.15.0 which is also old. Would updating the driver work and if so what driver? If a new card is the only way any recommendations for an inexpensive card?
View 1 Replies
View Related
Dec 20, 2008
I've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies
View Related
Dec 1, 2012
I have a ThinkPad running 2000PRO that I just installed a WPX54G Notebook Adapter. After installing and restarting the computer I get a window saying External exception E06D7363. Also, when I go into configure it says the adapter is inactive. When the computer first starts up the icon for the adapter is green then turns gray.
View 9 Replies
View Related
Aug 14, 2010
I have the WPC54G , used on Sony Vaio, Windows XP Home Edition Version 2002 and use a Novatel Wireless MiFi 2200 Mobile Hotspot. Recently had system crash--reinstalled through recovery discs and all current Windows Update (SP3), as well as the WPC54G The WPC54G worked with various WiFi Networks and the MiFi2200 Device before crash. After "recovery", it recognize WiFi Networks, however; it does not recognize my network established through the Novatel Wireless MiFi 2200 Device. (Note: the MiFi Device is working because other computer/devices are gaining access to internet.
View 7 Replies
View Related
Jul 12, 2011
I have a Packard Bell Laptop using Windows XP OS and doesn't have Wireless Connection. So long ago i bought a Linksys by Cisco Wireless-G Notebook Adapter WPC54G v.1.2 but didn't have time to set it up or use it for travelling conditions. A couple years later when i came back to check on the laptop, i noticed that i lost the setup CD. So i went on the Linksys website and looked for the driver the download. On the back of the Adapter(card) it says it is version 1.2. But this version is unavailable on the Linksys Website. I could only find v.1, 2,3,3.1 and 7. v.1 gives a driver of v3.1 etc... AND NOT VICE-VERSA.So first when i inserted the card into the slot , the PC didnt detect it. It only detected it rarely if i insert another driver (eg: USB..). And so a window would pop up to install but i didnt know what to do there. When i downloaded the v.1 driver from the website and installed it, it seemed not the detect the card either, it would just say searching for wireless, but that's it. It would keep searching for hours even when im next to the router.finally, only the Power led light on the card is lit up but not the "Link" led.
View 1 Replies
View Related
Feb 11, 2007
The "Wireless Network Monitor" for my Linksys Dual-Band Wireless A+G Notebook Adapter Model No WPC55AG has been unable to run after I last updated my Windows XP machine using Windows Update. The problem presents itself immediately upon login (because the monitor is set to run on startup) with an error window that says "Abnormal program termination" and "WPC55AGV2.exe" in the title bar. I suspect the problem occurred because one of the new updates included an upgrade to the Microsoft .NET Framework Services 3.0.
View 6 Replies
View Related
Aug 5, 2010
Just tried to setup my wireless adapter and after it tells me to plug in my adaptor I get.Wireless adapter setup requires that wireless connections are managed by Microsoft windows.
Error Description: Other Wireless Manager
Model Name: AE1000
Operating System: WIndows Vista SP2
Software Version: 1.2.10104.2
I looked all over my computer I can not find any other wireless manager on my system nor could I find a way to enable or disable windows wireless manager.
View 9 Replies
View Related
Nov 23, 2012
I have a problem with my EA4500. Router permanently rebooting. - router is not visible on the network. Ping to 192.168.1.1 - loss of all packets; - hard reset (30/30/30) does not work.
View 9 Replies
View Related
Aug 26, 2011
For some reason my E4200 keeps going back to Swedish (I'm in Sweden) even after I have manually set it to English and making sure to save the changes. What I'm talking about is the WEB interface reached by going to 192.168.1.1
Why does it do that and how can I make it stick to English without switching back to Swedish all the time by itself?
View 8 Replies
View Related
Apr 10, 2012
have a Dell laptop running Windows 98 on it and I'm trying to get a Linksys WPC54G ver. 4 PCMCIA adapter working on it. I finally got the adapter installed along with its device drivers and other required software such as IE6 and I have it connected to the router in my house. The only problem is, the card shows a connection between the card and the router but a broken connection between the router and the internet. I can't seem to figure out how to fix this considering all of the other wireless devices in our home (iPods, laptops, phone, tablets etc) connect to it which makes me think I have to designate (I'm no good at networking) an IP address or DNS like you would be able to on WinXP, Vista, or 7.I had a friend come over and he was looking through the admin settings on the router and said that it only supports WEP encryption, not WPA. The router is the standard router that Verizon gave us when they came in to install FIOS. The card says it supports WEP and WPA (Radius and PSK whatever that means) and I have it set to WEP and entered the password but I can't seem to get it connected to the internet. Would it work if I bought a new router or is there some kind of thing I need to punch into the Internet Protocol properties like you would on later OS'?
View 2 Replies
View Related
Jan 19, 2012
My WAG160N had been working fairly reliably until this morning.
It's now stuck in a permanent cycle of resets:-
1. Power lights flashes 10 secs
2. Then wireless light comes on for 5 secs then goes out
3. The 4 network port lights flash once
4. Then just power light comes on for 2 secs
5. Power light blinks red, and repeat...
I've tried powering off (router and anything trying to connect), & unplugging everything. No difference.
Also tried the reset button. This seems to work - power light goes red after about 5 secs, and the router restarts. But no improvement.
It's not even staying up long enough to connect to the admin page.
View 9 Replies
View Related
Jan 18, 2011
How do I disable Tunnel Adapters in windows 7?
View 1 Replies
View Related
Jul 6, 2012
What are the steps to turn on wireless capability permanently?
View 1 Replies
View Related
Sep 2, 2004
I have a network in my home using Mac computers (2). I needed to buy a PC for internet schooling. I bought a Dell Latitude and a Linksys WPC54G notebook adapter. I set up the notebook adapter, get a connection with good signal strength but cannot access the internet. I am using Windows XP Pro and have called Linksys with no dice. I don't have a network bridge and don't appear to have a firewall.
View 27 Replies
View Related
Jan 8, 2013
I just switched ISP's and they provided me with a Ubee router. The computer plugged directly into works fine, great speed, no drops. A laptop connected via Wifi is the same, great speed, no drops.My Router is not simply 'dropping' connection, but instead, 'disabling' the internet to the devices and forcing me to reconnect in order to get approx. a few minutes of it again.I have a Desktop computer with a WGA600N Gaming adapter hooked up to it, and an iPod touch.Both worked perfectly with the old router, so I know it's the router for sure. The thing is, it's not just dropping and reconnecting..
It's connecting for a few minutes, and disconnecting permanently until I reconnect to the connection..For my iPod, it doesn't actually disconnect me, I just lose internet. It says I still have 3 bars of signal strength on my iPod, but I don't have internet. I must hit 'Forget this Network' and retype the password in order to get another 2-3 minutes out of the signal.As for my Desktop hooked up with the gaming adapter, when the internet 'runs out', I simply unplug it and plug it back in to 'renew' the internet.
View 2 Replies
View Related
Apr 3, 2012
How can you see who is connected to your router network? I am using a Linksys E2000.
View 1 Replies
View Related
Sep 11, 2012
Is there a way I can monitor what web sites are visited through my E4200 V1 (firmware v1.0.04)
View 3 Replies
View Related
Nov 16, 2011
I've got the E3000 set up and working. What I'd like to do now is monitor all the devices' connectivity to it. The bandwidth it consumes and stuff. Is there a way to do that on my router?
View 6 Replies
View Related
Dec 28, 2011
All my previous routers have allowed me to monitor my connection speeds however I can't find this in this router. I found the client table under "status" but I have not been able to find the connection speeds anywhere. I like to make sure that my devices are running at close to 300Mbps and not 54Mbps in case I have a connection setup wrong. I have searched in the forums without much luck.
View 9 Replies
View Related
Oct 28, 2011
I just got optical fiber installed in my place which gives me great download speeds. Now my ISP has a monthly download limit of 120GB, after that I gotta pay overages.Now my setup is like this: Fiber modem (1 port) -> Linksys E3000 router (4 ports + wifi).All my gear is hooked up to the Linksys router (xbox, ps3, media center, office pc & 2 laptops).I would like to keep track of the total "internet" bandwidth use of all devices, but exclude the normal network traffic, as that of course I don't pay for.Is there something that I can install on the Linksys router that can keep track of that kinda of information? router (4 ports + wifi).
View 6 Replies
View Related
Sep 21, 2012
I have a WRT160N router. Are there any network software packages out "there" than will allow me to track the total traffic on this device?
View 1 Replies
View Related
Apr 18, 2013
I am looking to track what my kids are doing on the internet. I have an ea4500 and was wondering if there is a detailed log file that I can look at?
View 3 Replies
View Related
Aug 28, 2011
I am sharign my bandwidth with my neighbour and would like to keep a tab on what he is downloading, and then limit the speeds he gets while using my 4Mbps line. He's accessign using a WIFI L:AN card.Can I do this usign WRT160Nv2? Maybe any third-party.
View 2 Replies
View Related
Dec 11, 2010
I have a wag160n and would like to disable the wireless and use as a wired ASDL modem. I can't see any obvious settings I'm the setup or buttons on the unit but was wondering if I were to set the DHCP to disable if
View 4 Replies
View Related
Aug 20, 2011
Is there anyway to disable WPS on the WRT120N router?
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
View 3 Replies
View Related
Apr 20, 2013
My network consists of a Westel C90-610030-06 DSL modem, Cisco E2500 router and Hawking HWREN100 range extender.My wife has trouble with her IPad connecting to the Hawking.Apple says I need to Disable WMM on the E2500.
View 2 Replies
View Related
