I have a ThinkPad running 2000PRO that I just installed a WPX54G Notebook Adapter. After installing and restarting the computer I get a window saying External exception E06D7363. Also, when I go into configure it says the adapter is inactive. When the computer first starts up the icon for the adapter is green then turns gray.
View 9 RepliesI've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies View RelatedI run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies View RelatedWhere can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View RelatedI have a WPC54G version 4 wireless-G notebook adapter. I cannot find anywhere even here the driver for this device? I read the forums and have been googling all morning and I found one topic that said that version 3 (Vista compatible) WPC54G_V31_driver_4.100.15.5_vista.exe..will work with ver 4. I have tried it and my adapter will still not see the files in the extracted folder. There's 5 files in the folder and when I do the hardware/update driver method it won't see the drivers. I have tried all the other version and none will load??
How can I get this driver to work with my Windows XP? I don't have the CD anymore.
I have a WPC54G ver. 2 adapter I am trying to get to work on a thinkpad T22 running W2kPRO with all the SPs and updates installed. The power light comes on, but the link light does not. I am using a Linksys WRT54GS wireless router. The monitor icon shows in the taskbar and when I open it, it says the adapter is inactive. I have tried several time to download and install the driver for the Linksys site. It seems to install OK, but when I go back and check the Drivers tab to verify that the driver version has changed to 3.20.21.0, it is still version 6.0.0.18.
View 4 Replies View RelatedI am trying to install a WPC54G adapter in a Compaq EVO N610C Laptop with Windows XP SP3 and it has a Texas Instrument PCI-1420 CardBus Controller. Adapter is inactive. I have uninstalled, reinstalled, download updated drivers from Linksys.
View 1 Replies View RelatedHave an old laptop running XPSP2 with a WPC54G V1.2 card that I use for email when traveling. Had no problems accessing my old home network that ran off of a WRT54G V 5.0 wireless router, nor with any of the "motel wireless networks" when I travel. I changed ISPs and now have an Actiontec PK5000 wireless router.
When I attempt to connect I get an error message "unable to acquire network address."
This new router has the following 64 bit and 128 bit settings
wpa-wpa2 personal
wpa personal
wpa2 personal
wep
security off
Using any of the security settings I get the error. Turning off security allows me to connect fine.
I realize this is a pretty old wireless card so is it possible it doesn't work with the current encryption standards but I would have thought that wep would have worked. The driver for the card is V3.3.15.0 which is also old. Would updating the driver work and if so what driver? If a new card is the only way any recommendations for an inexpensive card?
I use a WPC54G wireless adaptor to connect a laptop to my home network. I just replaced a WRT54G2 router with a Cisco Valet router.When I start up the laptop, the wireless adaptor's Monitor configuration takes priority over Windows XP wireless configuration, but the Cisco Valet does not recognize the Monitor. If I disable the Monitor, everything is fine until I reboot, and then the Monitor again prevents connecting to the router.
How do I permanently disable the Monitor software so that the laptop will default to the Windows XP wireless configuration settings?
I have the WPC54G , used on Sony Vaio, Windows XP Home Edition Version 2002 and use a Novatel Wireless MiFi 2200 Mobile Hotspot. Recently had system crash--reinstalled through recovery discs and all current Windows Update (SP3), as well as the WPC54G The WPC54G worked with various WiFi Networks and the MiFi2200 Device before crash. After "recovery", it recognize WiFi Networks, however; it does not recognize my network established through the Novatel Wireless MiFi 2200 Device. (Note: the MiFi Device is working because other computer/devices are gaining access to internet.
View 7 Replies View RelatedI have a Packard Bell Laptop using Windows XP OS and doesn't have Wireless Connection. So long ago i bought a Linksys by Cisco Wireless-G Notebook Adapter WPC54G v.1.2 but didn't have time to set it up or use it for travelling conditions. A couple years later when i came back to check on the laptop, i noticed that i lost the setup CD. So i went on the Linksys website and looked for the driver the download. On the back of the Adapter(card) it says it is version 1.2. But this version is unavailable on the Linksys Website. I could only find v.1, 2,3,3.1 and 7. v.1 gives a driver of v3.1 etc... AND NOT VICE-VERSA.So first when i inserted the card into the slot , the PC didnt detect it. It only detected it rarely if i insert another driver (eg: USB..). And so a window would pop up to install but i didnt know what to do there. When i downloaded the v.1 driver from the website and installed it, it seemed not the detect the card either, it would just say searching for wireless, but that's it. It would keep searching for hours even when im next to the router.finally, only the Power led light on the card is lit up but not the "Link" led.
View 1 Replies View RelatedFor quite some time my linksys wireless g notebook adapter hasn't been connecting to the Internet at all. I go to my Internet options and my house's Internet router doesn't show up. I remember a long time ago I was clearing space on my computer because its and old one and it runs slow Because I don't have much memory and I might have accidently deleted the linksis progam / installation. And I have no way of re-intalling it. I think the only way of re-installing it is using the linkage disc but I lost it in some boxes packed in storage.
View 1 Replies View RelatedTravel in an RV and many campgrounds have poor WiFi setups. Looking for some type of external antenna I can put outside of trailer. I'm using a WMP600N adapter in a desktop PC running Win 7.
View 1 Replies View RelatedI have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View RelatedI have a Linksys wireless WMP600n PCi adapter installed in my desktop PC and after recovering from standby, it does not automatically reconnect. I have to right-click on the Wireless Networks icon in the system tray then select "Repair". I would say it does this 9 times out of 10 (1 time in 10 I seem to luck out and it restores the connection automatically).
I have an Asus M4A88TD-M motherboard with 1 Gb of DDR3 RAM and I am running Windows XP Home Edition (SP3). There is only one PCi slot on this motherboard. Also, I am not using the wireless network software that shipped with the product but rather the native wireless networks application software that shipped with Windows XP. I have had this problem with the original driver that shipped with the product CD and the problem persists with the latest driver. I have not enabled Hibernation and there are no active power saving modes on the PC.I have reviewed all of the options in the Wireless 600n Properties/Advanced tab and have enabled the Continuously Awake Mode and disabled the Power Saving Mode but the problem persists.
I have two other PCs with the older Linksys wireless WMP300n PCi adapters and they do not exhibit this behaviour after recovering from standby - they reliably reconnect.
I am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means. We have wireless internet through Comcast, and my room is on the second floor. The router is on the first floor, but it's almost just underneath my room. The internet seems to connect completely fine, but it will disconnect at some things. For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection. I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..
View 1 Replies View RelatedI have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies View RelatedHaving problem getting another computer online with because it askes me for a password to tmy E1000 CIsco Router but ddidn't get password when i first set it up.. Router number, series, IP address doesn't work either. any thoughts on possible passwords or how i contact Cisco for assistance.
View 1 Replies View RelatedI have the model AE1200 usb adapter and its been working great for over 6 months, but lately it has been inconsistently working. It has stopped working then i have to reset the adapter and then it will work for a little bit and then it will do it again. is this a common problem or is it likely my adapter is failing? Is there an update that i am missing?
View 1 Replies View RelatedI've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?
View 3 Replies View RelatedI am trying to connect to the internet a second, older tower using the WUSB600N ver 2 adapter, the unfortunate part is that I have lost my CD's that originally came with the adapter. I am on my primary machine right now so I am able to get online. I am wondering if there is a way that I can get the proper drivers or software, put them on a USB drive and then put them on the computer that I am trying to connect?I have already tried this, but I cannot seem to get the steps right or I don't necessarily know what I am doing. I am at the Linksys support Page [URL] and I have tried to do as I mentioned before, but I am sort of just expecting it to GO and its not working. The computer i would like to make the WUSB600N adapter for is running windows XP pro Service Pack 3?
View 1 Replies View RelatedYesterday, I changed over to my new ISP (Orange). I have installed their router but the Linksys Adapter can't find it?I have laptop which found the Orange router straight away so it is working correctly. Also, the laptop lists around 10 networks in the area.
The WUSB54GS adapter finds just 1 or 2 networks but never the new Orange network I have set-up.I've tried uninstalling and re-installing, downloading the version updates but nothing works.
As titled have older linksys USB wifi adapter but Network magic wont add because 'other software' controlling adapter. Picked up a Dlink adapter dwa-131 usb wifi adapter but same issue, software conflict?Ive added several computers and laptops, different operating systems. Ipad, Ipod, blueRay, printer with no issues. But this USB wifi adapter has me completly stumped. This cant be this hard...dense I can be but... Is there a way simply that Im not seeing, adding a computer using a USB wifi adapter to my network thats compatible with NM?? Computer is an older Dell 8200 with XP sp3. I contacted support but maybe because my question was related to NM response was basically "your question was 'too technical call xxxxxxxx" -
View 2 Replies View RelatedI need a driver for a Wireless Notebook Adapter MN-720 (On a HP-Pavilion zt1145).. I have been searching for 7 hours for one everywhere.. NO ONE HAS IT, CNET says they do, but send me to some obsolete page as does Microsoft..
View 3 Replies View RelatedI just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies View RelatedI recently purchased a Linksys AE3000 Dual-Band Wireless-N USB Adapter as an upgrade to my Dell Desktop Computer and to compliment the Linksys EA4500 Router that I recently installed. Generally it seems to work well and the 2.4 GHz network status typically shows speed to be 450 Mbps. However, I’ve discovered if the computer goes to sleep based on my power plan, when it comes out of sleep the “Available Networks” will show the network I’m connected to (2.4 GHz network) and a false network identified as “Other Network” with a Red “X” where signal strength would normally be. When I mouse over it; it shows Network Name: Other Network; Signal Strength: Excellent; Security Type: Unsecured; Radio Type: Unknown; and SSID: Other Network.
Initially I thought this was an anomaly caused by having both bands of the Router (2.4 and 5.0 GHz) set to the same SSID, so I changed the 5.0 GHz band to a different SSID and set my Media Players to access the new SSID. However, now when the computer comes out of sleep mode, Available Networks will initially only show the Router’s 2.4 GHz SSID and the phantom “Other Network”. It takes a while before the Router’s 5.0 GHz SSID shows up. We live in the country, so there are no other networks close to us, just my home network. It never shows the “Other Network” when I start or restart the computer and if I disable the adapter and then enable it, the phantom network goes away until the computer goes into and out of sleep mode again. Also, I uninstalled and then reinstalled the Driver and then reinstalled the Adapter using the Cisco Connect Software and the problem still exists. Finally, I disabled the Router’s 5.0 GHz network and the phantom network no longer appears under any conditions. The Dell (Atheros Communications) Wireless Card in the computer doesn’t have this issue under any scenario. On both the AE3000 and Atheros Adapters the 2.4 GHz network shows a signal strength of Excellent (5 out of 5 bars) and the 5 GHz network shows Good (3 out of 5 bars).
How to correct this issue? With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.
I have an HP G62-340US Notebook with Windows 7. I keep getting the error message "The Windows Wireless service is not running on this computer". My laptop cannot see any wireless connections, but I can connect to the internet via ethernet cable.
View 2 Replies View RelatedI have a desktop PC with no wifi card that I want to use with a Clear Wifi hotspot. I have a WGA54AG Linksys Gaming Adapter and I want to use this with the desktop to access the wifi. I do not know how to reconfigure the gaming adapter for the CLear hotspot's security protocols.
View 1 Replies View RelatedI just installed a new router E3200.... now to install compatible USB adapter (AE2500)..... problems. The error is that the Cisco Connect software cannot find the USB adapter when I plug the AE2500 into any of the USB ports. The target machine is a lenovo T61 with XP installed.I have successfully installed the AE2500 on an older machine lenovo R52 with XP , no problems, so not the adapter.
I downloaded more recent version of Cisco Connect v 1.0.03, still no luck on T61.I also disabled firewall and virus protection, that did not work. Other possibilities I can try? I got the AE2500 for the T61, would like to get there.
I have just installed a Linksys WPM600N Wireless Adapter. I am trying to configure the adapter to wake the computer from standby but the option is greyed out in the device manager properties box. how I can configure this adapter to wake the computer out of standby?
View 1 Replies View Related