I have a desktop PC with no wifi card that I want to use with a Clear Wifi hotspot. I have a WGA54AG Linksys Gaming Adapter and I want to use this with the desktop to access the wifi. I do not know how to reconfigure the gaming adapter for the CLear hotspot's security protocols.
View 1 RepliesI have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies View Relatedhave received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.
View 6 Replies View RelatedMy router/modem is at one corner of the house and my computer is supposed to go in the other corner of the house. I am looking to play Battlefield 3, CS:GO, CoD:4, DayZ, and some other online games that require good connection to even do decent. I am going to be downloading different things and uploading videos to YouTube. I need a VERY FAST WiFi adapter that is comparable to wired connection, and remember, my computer will be all the way across the house.
View 6 Replies View Relatedneed the name of driver for clear hotspot
View 1 Replies View RelatedI'm looking for a very strong wifi adapter for my gaming pc. My router and modem are both below me in my home so I can't run the Ethernet cord to my room.
View 7 Replies View RelatedI've tried so many settings I cant even remember where i left off but one general question, troubleshoot to the next step with the wga54g; sometimes the connection shows 'acquring address' but never connects. I've fiddled with things so that i can get the GA to acquire an address but the internet comes through. Also the GA never shows up on the client table. So is the fact that i can get a network address a good thing or doesn't that necessarily mean i'm 'connected' to the network. Its frustrating to have the G light lite up yet no connection also at one point I did get the GA to show up in the client table when it was directly connected to the linksys 1200 but when i walked into the room and attached it to the PC, no dice I've turned off all firewalls temporarily and the 1200 is set on wpa/wp2 mixed. when i tried setting it just to wpa i got a warning then I lost my internet. I had to reinstall the 1200 again.
View 1 Replies View RelatedI have the E4200v1 and if I remember correctly I think its on 1.0.0.3 (cant remember because I went back to my wndr3700). I had not had any problems with it until yesterday when I returned to playing The Hunter (first time playing it on the E4200) and my girl hollered upstairs saying that she lost connection on the laptop. I reset the router and she reconnected and I went back to playing the game. 2 minutes later she hollers again. I stopped playing the game to try to figure out the wireless issue and everything looked normal. No more loss connections for the next few hours..........Until I started playing the game again...so I took it out of line and put the 3700 back in line and played the game for hours with no connection drop to the wireless. Is this a knows issue on the 4200? Are some setting changes necessary to game on it? btw I was playing the game wired and it didnt effect the connection at all?
View 6 Replies View Relatedi am looking for a great wireless adapter for gaming. I am looking at this one. [url]....
View 4 Replies View RelatedI've recently upgraded my computer from a XP machine to a Win7 machine. Back in the old days of my XP machine I would almost only use it to play a Battlefield 2 mod called Project Reality.When I first purchased the wirelsess USB adapter I had a problem with the game losing connection for a little while every 30 second, which of course was extremely annoying. I later solved this problem by disabling Windows Zero Wireless.
But if I turn off WLAN autoconfig in Windows 7 I'm not able to connect to my WIFI at all. It turns off my third party wireless software as well?By the way my USB adapater is a D-link 160 and my router is a D-link 615 (Maybe... I'm at work so it's just out of my memory)
is this type of device TEW-647GA Wireless Gaming Adapter the same as a network bridge? If so, why don't they call it a network bridge, which is a more general purpose device and appeal to more buyers?If not, what is it about this gaming adapter that makes it better than a network bridge for connecting to xbox, tivo, etc?
View 1 Replies View RelatedI have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View RelatedI have a Linksys wireless WMP600n PCi adapter installed in my desktop PC and after recovering from standby, it does not automatically reconnect. I have to right-click on the Wireless Networks icon in the system tray then select "Repair". I would say it does this 9 times out of 10 (1 time in 10 I seem to luck out and it restores the connection automatically).
I have an Asus M4A88TD-M motherboard with 1 Gb of DDR3 RAM and I am running Windows XP Home Edition (SP3). There is only one PCi slot on this motherboard. Also, I am not using the wireless network software that shipped with the product but rather the native wireless networks application software that shipped with Windows XP. I have had this problem with the original driver that shipped with the product CD and the problem persists with the latest driver. I have not enabled Hibernation and there are no active power saving modes on the PC.I have reviewed all of the options in the Wireless 600n Properties/Advanced tab and have enabled the Continuously Awake Mode and disabled the Power Saving Mode but the problem persists.
I have two other PCs with the older Linksys wireless WMP300n PCi adapters and they do not exhibit this behaviour after recovering from standby - they reliably reconnect.
I am trying to use a MIFI hotspot for the internet, I have a wifi laptop, and a wifi printer.I would like to print wirelessly from my laptop and use the internet at the same time, but I can't. To print I have to go to my wireless network and switch to my router. And if I want to use the internet I have switch my wireless network back to the MIFI hotspot.
View 3 Replies View RelatedI am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means. We have wireless internet through Comcast, and my room is on the second floor. The router is on the first floor, but it's almost just underneath my room. The internet seems to connect completely fine, but it will disconnect at some things. For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection. I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..
View 1 Replies View RelatedI have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies View RelatedHaving problem getting another computer online with because it askes me for a password to tmy E1000 CIsco Router but ddidn't get password when i first set it up.. Router number, series, IP address doesn't work either. any thoughts on possible passwords or how i contact Cisco for assistance.
View 1 Replies View RelatedI have the model AE1200 usb adapter and its been working great for over 6 months, but lately it has been inconsistently working. It has stopped working then i have to reset the adapter and then it will work for a little bit and then it will do it again. is this a common problem or is it likely my adapter is failing? Is there an update that i am missing?
View 1 Replies View RelatedI've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?
View 3 Replies View RelatedI am trying to connect to the internet a second, older tower using the WUSB600N ver 2 adapter, the unfortunate part is that I have lost my CD's that originally came with the adapter. I am on my primary machine right now so I am able to get online. I am wondering if there is a way that I can get the proper drivers or software, put them on a USB drive and then put them on the computer that I am trying to connect?I have already tried this, but I cannot seem to get the steps right or I don't necessarily know what I am doing. I am at the Linksys support Page [URL] and I have tried to do as I mentioned before, but I am sort of just expecting it to GO and its not working. The computer i would like to make the WUSB600N adapter for is running windows XP pro Service Pack 3?
View 1 Replies View RelatedYesterday, I changed over to my new ISP (Orange). I have installed their router but the Linksys Adapter can't find it?I have laptop which found the Orange router straight away so it is working correctly. Also, the laptop lists around 10 networks in the area.
The WUSB54GS adapter finds just 1 or 2 networks but never the new Orange network I have set-up.I've tried uninstalling and re-installing, downloading the version updates but nothing works.
As titled have older linksys USB wifi adapter but Network magic wont add because 'other software' controlling adapter. Picked up a Dlink adapter dwa-131 usb wifi adapter but same issue, software conflict?Ive added several computers and laptops, different operating systems. Ipad, Ipod, blueRay, printer with no issues. But this USB wifi adapter has me completly stumped. This cant be this hard...dense I can be but... Is there a way simply that Im not seeing, adding a computer using a USB wifi adapter to my network thats compatible with NM?? Computer is an older Dell 8200 with XP sp3. I contacted support but maybe because my question was related to NM response was basically "your question was 'too technical call xxxxxxxx" -
View 2 Replies View RelatedI built my new computer a while ago & I have went through 3 wireless network adapters already... 2 from d-link that just stopped working after 1-3 months and my current linksys ae3000 disconnects from internet randomly while gaming.I am looking for a new Wireless Network Adapter, or any tips or anything to stop my current problem.
Specs:
Spoiler
HDD: Seagate Barracuda 1TB 7200 RPM 32MB Cache
SSD: SanDisk Extreme 2.5" 120GB SATA III
Mobo: ASUS P8Z68-V PRO/GEN3 LGA 1155
GPU: EVGA SuperClocked GeForce GTX 680 2GB
RAM: G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
CD Drive: LITE-ON DVD Burner - Bulk 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM Black SATA Model iHAS124-04 - OEM
PSU: CORSAIR Enthusiast Series TX850 V2 850W
CPU: Intel Core i7-2700K Sandy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155
CPU Cooler: COOLER MASTER Hyper 212 EVO
OS: Windows 7 Ultimate 64-bit edition
I've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies View RelatedI just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies View RelatedI recently purchased a Linksys AE3000 Dual-Band Wireless-N USB Adapter as an upgrade to my Dell Desktop Computer and to compliment the Linksys EA4500 Router that I recently installed. Generally it seems to work well and the 2.4 GHz network status typically shows speed to be 450 Mbps. However, I’ve discovered if the computer goes to sleep based on my power plan, when it comes out of sleep the “Available Networks” will show the network I’m connected to (2.4 GHz network) and a false network identified as “Other Network” with a Red “X” where signal strength would normally be. When I mouse over it; it shows Network Name: Other Network; Signal Strength: Excellent; Security Type: Unsecured; Radio Type: Unknown; and SSID: Other Network.
Initially I thought this was an anomaly caused by having both bands of the Router (2.4 and 5.0 GHz) set to the same SSID, so I changed the 5.0 GHz band to a different SSID and set my Media Players to access the new SSID. However, now when the computer comes out of sleep mode, Available Networks will initially only show the Router’s 2.4 GHz SSID and the phantom “Other Network”. It takes a while before the Router’s 5.0 GHz SSID shows up. We live in the country, so there are no other networks close to us, just my home network. It never shows the “Other Network” when I start or restart the computer and if I disable the adapter and then enable it, the phantom network goes away until the computer goes into and out of sleep mode again. Also, I uninstalled and then reinstalled the Driver and then reinstalled the Adapter using the Cisco Connect Software and the problem still exists. Finally, I disabled the Router’s 5.0 GHz network and the phantom network no longer appears under any conditions. The Dell (Atheros Communications) Wireless Card in the computer doesn’t have this issue under any scenario. On both the AE3000 and Atheros Adapters the 2.4 GHz network shows a signal strength of Excellent (5 out of 5 bars) and the 5 GHz network shows Good (3 out of 5 bars).
How to correct this issue? With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.
I have a ThinkPad running 2000PRO that I just installed a WPX54G Notebook Adapter. After installing and restarting the computer I get a window saying External exception E06D7363. Also, when I go into configure it says the adapter is inactive. When the computer first starts up the icon for the adapter is green then turns gray.
View 9 Replies View RelatedI just installed a new router E3200.... now to install compatible USB adapter (AE2500)..... problems. The error is that the Cisco Connect software cannot find the USB adapter when I plug the AE2500 into any of the USB ports. The target machine is a lenovo T61 with XP installed.I have successfully installed the AE2500 on an older machine lenovo R52 with XP , no problems, so not the adapter.
I downloaded more recent version of Cisco Connect v 1.0.03, still no luck on T61.I also disabled firewall and virus protection, that did not work. Other possibilities I can try? I got the AE2500 for the T61, would like to get there.
I have just installed a Linksys WPM600N Wireless Adapter. I am trying to configure the adapter to wake the computer from standby but the option is greyed out in the device manager properties box. how I can configure this adapter to wake the computer out of standby?
View 1 Replies View RelatedMy desktop can go to internet with ethernet wire on. After installing wireless adaptor driver, the adaptor shows green solid light on 'power' and blinking light on 'Link'. The Linksys icon shows 'Cannot associate with the access point'. I called Verizon and was told that the adaptor might have problem. I want to know if really the adaptor's problem or the adaptor installation problem.
View 1 Replies View RelatedI have a Linksys WUSB54G version 4 adapter.My computer is running Windows XP, Service Pack 3, which is automatically updated at all times. I've been using the adapter for a year with no problems.
Suddenly, it's started loosing the connection to the Linksys router and locking up my computer so only a hard re-boot power-down will work.When it comes back up, some or all of my cookies are lost.
I've run several different security packages but no virus or other issues have been found.I've uninstalled the adapter and reinstalled it.Last time, following something I read on this site, I installed it without the Linksys software, just the drivers.