Belkin Routers :: Will N450 DB F9K1105 V1 Work With Linksys PoE PLEK400 Adapters
Dec 26, 2012Will a Belkin N450 DB F9K1105 v1 work with Linksys PoE PLEK400 adapters?
View 1 RepliesWill a Belkin N450 DB F9K1105 v1 work with Linksys PoE PLEK400 adapters?
View 1 RepliesRouter is a Model F9K1105. Two PCs, a MAC laptop and two TiVo DVRs have connected without any issues. Printer SEES the network but will not connect.
View 1 Replies View RelatedHere is my Windows IP Configuration:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.invalid
Link-local IPv6 Address . . . . . : fe80::102:103b:dc51:f708%10
IPv4 Address. . . . . . . . . . . : 192.168.254.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
Can I connect a Belkin N450 wireless router to a Belkin N750 wireless router without using a cat5e cable?
View 1 Replies View RelatedMy Belkin N450 assigns a 192.168.169.2 for an IP address. This does not allow me to add to the DMZ to bypass firewall and open my NAT. It wants a 192.168.2.__. What do I need to do to make this happen?
View 1 Replies View RelatedCan I Connect The Belkin N450 Router If I Don't Have A Modem? I Want To Use It To Connect My Ipod Touch to Wi-Fi.
View 2 Replies View RelatedNewer router purchased in Sept. 2012, can't get laptop connected to it.
View 1 Replies View RelatedBelkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies View RelatedThis model is FK91105v1. It is great with our ten different devices (possibly even a dozen?), but it continues to disconnect a Kindle Fire - that used to connect with no problem - evidently upon acquisition of a newer Kindle Fire. As long as MAC Filtering is not enabled, then there shouldn't be an issue of a "white list" - which the Kindle manual suggests as a solution ("If ... filtering is enabled, ensure your Kindle's MAC address is added to your router's white list in your network settings"). (I did figure out how to go to the network address, but was mostly flumoxed from there)
View 2 Replies View RelatedWithout my N 450 router hooked up I am getting hardwired speeds of 50/5 mb, but with N 450 hardwired into my PC the speeds drop to 20/5 mb. I have checked DHCP and I am not getting piggy backed. Is it a bottlekneck, misconfigured or just not compatible with Time Warner?
View 1 Replies View Relatedi have no access to my laptop keyboard, it crashed but i still need to use router for my roku and nintendo wii, however my isp has a captive portal.
View 1 Replies View RelatedIt took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.
View 1 Replies View RelatedYesterday, I installed the N450 DB and it was probably the easiest install I've ever had to do. One problem though, I can now no longer send or receive email thru Outlook Express 6. Keep getting this message 'The host 'mail' could not be found. Please verify that you have entered the server name correctly. Account: 'mail', Server: 'mail', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D'.
View 3 Replies View RelatedI have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies View RelatedRouter interface for N450 DB fails to load/loads slowly/loads partially. I am running Windows 8, and have tried IE10 both from Start Screen and desktop, no luck.
View 4 Replies View RelatedHow to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View Relatedhave purchased Belkin wifi usb adapter dualband N450 and downloaded the driver from included CD, my OS is windows7 starterfter I plug in the adapter, the power ON is litting and wait for a while if will flashing but not. I opened the "NETWORK AND SHARING CENTER" and click the "CHANGE ADAPTER SETTINGS", the Belkin wireless adapter is disabled and had tried enabling it but still it is disable. I uninstalled the driver and the program, I checked in the internet and downloaded the file F9L1101v1_N600.exe and installed. Checked again but still the same problem before, Disabled and tried enabling but to no success.
View 3 Replies View RelatedI bought a Canon Pixma mg3220 all in one printer/scanner today. I specifically picked it for the Airprint feature for my IPhone, which I can't get to work. Is it a problem with my F5D7234-4 v5 router? I have updated the firmware and it still won't print. The Iphone sees the printer, but that's as far as I get.
View 2 Replies View RelatedDoes the F9K1113 work with BT Infinity? I have tried to get this to work but I cannot
View 2 Replies View RelatedMy belkin , model# f7d5301 v1 is not compatible with my hp laptop.
View 1 Replies View RelatedI am replacing my modem, and intend on getting one that supports IPv6. Does the Belkin model F5D7234-4 support IPv6, and does it need to?
View 1 Replies View RelatedHow to get "Video Mover" to work on my N900 DB. My TV has a DLNA client and can see other DLNA servers (PCs, etc.) but cannot see the Belkin.
View 5 Replies View RelatedI have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies View RelatedI just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies View RelatedI have just bought a n300 everything works well except i cant get my sky on demand wireless bridge to work , sky have said all ok, as have my broadband supplier. im told i need to maybe change my wireless settings in router !
View 2 Replies View RelatedI'm trying to get 'Access Control' working so I can limit Wi-Fi time on my kids iPod touches, but the settings aren't clear and the help file is not clear whatsoever.I've been testing it with my iPhone, I have the MAC added, but none of the options available will even stop my iPhone accessing the internet over my Wi-Fi.
View 1 Replies View RelatedI have just purchased the latest 2012 27" iMac and I would like to know if the Belkin AV360 (F2CD007) works with this iMac as it has thunderbolt ports and not the previous mini display ports that older iMacs have? I have searched online and asked Apple directly but they referred me to Belkin. I have emailed Belkin and the reply was not useful.
View 1 Replies View RelatedHow can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
View 1 Replies View RelatedWhen I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies View RelatedI run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies View RelatedI've recently bought an AE2500 wireless adapter, and I've had problems setting it up, I've checked my port drivers versions and they're all up to date, I have looked over countless websites figuring out why it is doing this, my computer is a Windows Vista, and my last resort is formatting the computer, I've been here for countless hours trying to get this to work, when I run the disk with the adapter, it gets stuck at "Detecting Adapter" and ends up coming up with "Cannot find wireless adapter" or something really close to that. I've tried switching it to all of my USB ports, and nothing is working!
View 5 Replies View RelatedI have a Belkin AC1200 Router. It seems working properly re Internet/Wireless connections. When I connect a printer (Canon Pixma MP500) through the USB port the (USB) light doesn't turn on, nor the printer is appearing on the "available devices" (Belkin USB Print and Storage Center).
View 2 Replies View RelatedI have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View Related