I have just purchased the latest 2012 27" iMac and I would like to know if the Belkin AV360 (F2CD007) works with this iMac as it has thunderbolt ports and not the previous mini display ports that older iMacs have? I have searched online and asked Apple directly but they referred me to Belkin. I have emailed Belkin and the reply was not useful.
View 1 Repliesdoes a belkin modem router type 437B96 N+ work with a iMac? and/or do I need special software/firmware upload? from where?
View 1 Replies View RelatedI have an iMac running 10.4.11. I would like be able to print through the router. I now have my PC laptops doing so. What voodoo do I have to do to make the iMac work with it?
View 3 Replies View RelatedI bought a Canon Pixma mg3220 all in one printer/scanner today. I specifically picked it for the Airprint feature for my IPhone, which I can't get to work. Is it a problem with my F5D7234-4 v5 router? I have updated the firmware and it still won't print. The Iphone sees the printer, but that's as far as I get.
View 2 Replies View RelatedDoes the F9K1113 work with BT Infinity? I have tried to get this to work but I cannot
View 2 Replies View RelatedMy belkin , model# f7d5301 v1 is not compatible with my hp laptop.
View 1 Replies View RelatedI am replacing my modem, and intend on getting one that supports IPv6. Does the Belkin model F5D7234-4 support IPv6, and does it need to?
View 1 Replies View RelatedHow to get "Video Mover" to work on my N900 DB. My TV has a DLNA client and can see other DLNA servers (PCs, etc.) but cannot see the Belkin.
View 5 Replies View RelatedI have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies View RelatedI just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies View RelatedI have just bought a n300 everything works well except i cant get my sky on demand wireless bridge to work , sky have said all ok, as have my broadband supplier. im told i need to maybe change my wireless settings in router !
View 2 Replies View RelatedI'm trying to get 'Access Control' working so I can limit Wi-Fi time on my kids iPod touches, but the settings aren't clear and the help file is not clear whatsoever.I've been testing it with my iPhone, I have the MAC added, but none of the options available will even stop my iPhone accessing the internet over my Wi-Fi.
View 1 Replies View RelatedHow can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
View 1 Replies View RelatedI have a Belkin AC1200 Router. It seems working properly re Internet/Wireless connections. When I connect a printer (Canon Pixma MP500) through the USB port the (USB) light doesn't turn on, nor the printer is appearing on the "available devices" (Belkin USB Print and Storage Center).
View 2 Replies View RelatedWill a Belkin N450 DB F9K1105 v1 work with Linksys PoE PLEK400 adapters?
View 1 Replies View Related(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedHow do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View RelatedI have a Belkin router and several Apple products. I understand that Belkin and Apple have communication issues. how to make these two work together better?
View 5 Replies View Related[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
problem with a Belkin Wifi Router: it's a G+ wireless router
Model:F5d9231-4 Version 2
OS- XP Service pack 2
i've tried resetting to factory settings and power cycling my modem and router but nothing.. the issue is that my Wifi icon on the router does NOT show and i went in to the setttings for it and tried resetting everything and nothing works. it works fine hardwired but my Wireless does NOT work..
I just purchased a Belkin prepmium CAT5e networking cable and plugged it into an internet wall jack and hooked it up to my ps3 and the connection won't work. Does it have to be hooked up to a router? Is a CAT5e cable the same as ethernet? or will I need to buy a different cable?
View 3 Replies View RelatedI have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.
View 1 Replies View RelatedI have a micro-server at home running Server 2012 which is going to have a few virtual machines on hyper v.I also would like to use the server to watch films on which will be connected to by tv using a hdmi cable..I wanted to know is it ok to play films off server 2012 and watch them on the tv?
View 9 Replies View RelatedI have some unused 10G NIC's and want to see if there's a way to install them into a computer and turn that PC into a switch. I need to run Windows based software for driver support of the NIC's, such as Server 2012. This is a picture of what I am hoping to accomplish:
[PC1] -----10G------[PC2]------10G------< Hardware Switch >
| | | | |
1G 1G 1G 1G 1G
| | | | |
[PC3][PC4][PC5]......
As you can see in the simplified picture above, I have a real switch which has a single 10G link that is connected to PC2. I would like to add the 10G cards to PC2 so that I can create a "switch" of 10G ports on PC2 which I can then hook up other clients (such as PC1 in the above picture).
PC2 needs to provide network access and internet access to PC1 (and other PC's connected to PC2 - not pictured).
The rest of the clients on the network are connected to the regular gigabit ethernet ports of the hardware switch (including my router which is 192.168.1.1).
I looked into Windows Internet Sharing, but for that to work, I need to connect the router to PC2 above and for other considerations not described above, it is not physically possible for me to do that.
Is there software I can run on PC2 that will turn all the NIC ports of PC2 into a "switch"?
We have CAM/CAS 4.8.2, NAC agent 4.8.2.3 and compliance module 3.4.27.1. AVG 2012 cannot be recognized by NAC agent. From the link below, it should work: [URL].
View 1 Replies View RelatedI am having a bit of trouble. I have a Belkin router (this is irrelevant) across the house, which is extended by the Belkin wireless bridge/repeater in my bedroom. The device in my room boosts my WiFi signal for my MacBook and iPhone, and the LAN (ethernet) port on the back allows my Debian server to connect to the network and internet. I have a Linksys switch that I wish to use, for I have another computer that requires an ethernet connection. Here is what happened:Debian 1 is connected via ethernet, no problem.I shut it down, unplug cable. Run cable from bridge to switch's uplink.Plug another ethernet cable into port one on switch, run it to Debian 1.
View 1 Replies View RelatedI just installed Server 2012 Standard on a trial. I would like to play around with Remote Desktop Services formerly called Terminal Services. I have no clue on where to start but I have installed the RDS roles.
View 7 Replies View RelatedI'm trying to connect my macbook air to a university Ethernet network. I'm using the apple thunderbolt to ethernet adaptor to connect, and it registers a connection in the network preferences, with an IP address and subnet mask number. However, it wont fill the router name, the DNS server number or the search domains fields.When I use google chrome to load a webpage it doesn't load, stating that a DNS lookup has failed.How do I get connected?
View 1 Replies View RelatedI need to know if PC Anywhere will work for the IMac and if not, what is the equivalent remote access program for the IMac?
View 1 Replies View Relatedhad router failure- unable to get by airport password. How can we reset?
View 2 Replies View RelatedFirst off, using a iMac Laptop. As I've noticed no one's posted with that yet.Ok. Purchased the DIR-601. I have set up the Admin. Created the Wireless Network (As far as I'm aware) with a WPA-Personal. I think in might be that I need to connect via Static IP. I have it set for Dynamic IP.I can use internet via Ethernet but as soon as I try to pick the nework I created. It tells me Connection was Timed out!
View 8 Replies View RelatedIf your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies View Relatedi have an imac running vmware in an office that needs to connect to our server using 2003, but i cant make it see the shared drive, or seemingly connect at all. how do i go about this?
View 3 Replies View Related